TSC100
Compact GPS Clock
- Mô tả Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
- Thông số Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
- Tài liệu Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
The TSC100 is a low cost, compact and accurate satellite clock with submicrosecond timing and optional NTP/SNTP and PTP Server, that is used to synchronize Intelligent Electronic Devices in the power and industrial automation industry.
Key Features:
- Single RJ45 port
- Local configuration USB Port
- PTP (IEEE 1588v2) Master/Slave function
- UTC & LST with user defined DST options
- Remote configuration
- Security including password protection, user authentication & data encryption
- Multi level password protection with custom configurable privilege settings
- Complies with 61850-3
Input/Output Signals:
- SNMP v1, v2c & v3
- Proprietary MIB, USM MIB, C37.238 MIB
- NTP/SNTP v3, v4 server operation, and basic SNTP client protocol for testing purposes
- PTP IEEE 1588v2 (Supports Power Profile – C37.238, and Telecom Slave Profile – ITU G.8265.1)
| Physical | |
| Design: | Metal DIN-rail mountable case, with IP30 rating |
| Measurements: | (L) 155 mm x (W) 110 mm x (H) 45 mm |
| Weight: | 0.42 kg |
| LED Indicators:
| Three LEDs indicate multiple statuses: – Sync – Alarm – Power |
| GNSS Receiver | |
| L1, C/A code, 32 Channel Parallel-tracking receiver | |
| Frequency: | 1598 Mhz |
| Acquisition (Sensitivity): | – 155 dBm |
| Tracking (Sensitivity): | -160 dBm |
| Oscillator – TCXO | |
| Holdover characteristics operating at 25°C : | – TCXO 1PPS drifts 0.55 ms over a 24 hour period. – Drift rate: 7 ppb per second |
| Inputs & Outputs | |
| Sync indication output: | 200 V, 100 mA (Max) |
| USB 2.0 local configuration port: | Type B, USB 2.0 |
| RJ45 UTP Connector: | 10/100 Mbps, Auto MDIx |
| Antenna connector: | BNC 100 mA drive power |
| Ethernet UTP Connection | |
| Protocols supported: | ARP, UDP, ICMP, TFTP, DHCP, SNMP, and BOOTP |
| NTP/SNTP: | Stratum-1 NTP & SNTP time server, Multicast & Broadcast server capability, Optional MD5 authentication Timing Accuracy: <100 ns to UTC |
| PTP (IEEE1588 v2) | – GrandMaster – Slave Default – Power Profile (Full) – C37.238 – Telecom Slave Profile – ITU G.8265.1 – 1-step/ 2-step – Layer 2 or Layer 3 – Peer to Peer delay – End to End delay – Multicast operation – Accuracy <100 ns to UTC |
| SNMP | – v1, v2c & v3 support can be independently enabled – Configurable v1, v2c community names & security groups – Fully configurable via SNMP – v3 User-based Security Module (USM) support – USM MIB support |
| USM authentication methods | – MD5 – SHA |
| USM privacy methods | – DES – AES |
| Notifications | – SNMP trap generation v1, v2c & v3 – SNMPv3 traps can be authenticated |
| Upgrades | Remote upgrades supported via Ethernet port |
| Isolation | |
| Power to Antenna | 3.75 kV |
| Power to I/O | 3.75 kV |
| Environmental & Electrical | |
| Power supply | 48-250 Vdc (wide range supply) |
| Power drain | 5 W max |
| Operating temperature | -40 to +85 C |
| Humidity | 95% non-condensing |
| Compliance | |
| The NTS100 passes the following tests: Applicable council directive according to: – CE Compliance Low voltage directive EN60950-1 – EMC Directive EN61000-6-2, EN61000-6-4 – C22.2 No. 60950-1 | |
| Programmability | |
| Customization is achieved using the windows based Tekron Configuration Tool, which is accessed via Ethernet/USB, allowing remote configuration. | |
| User adjustable features include: | – Multi-level access control – Privacy & authentication methods equivalent to SNMP USM – “Supervisor-mode” prevents non-approved changes |
| Timing & Synchronization: | Worldwide daylight savings & local time configuration using either rule based or fixed date methods. Options that allow equipment checks prior to full installation and adjustable hold-over times to increase reliability in the case of poor GPS coverage. Adjustments to compensate for installation parameters such as delay of GPS signal through antenna cable. |
