Tính năng và lợi íchGetting Started with AWS IoT 4G LTE Guide

  • Bộ xử lý ARMv7 Cortex-A8 300/600/1000 MHz
  • Cổng Ethernet kép tự động cảm biến 10/100 Mbps
  • Ổ cắm SD để mở rộng bộ nhớ và cài đặt OS
  • Đèn LED có thể lập trình phong phú và một nút có thể lập trình để dễ dàng cài đặt và bảo trì
  • Ổ cắm mini PCIe cho module di động
  • Nền tảng mở Debian 8
  • An ninh mạng

Tổng quan

Nền tảng máy tính UC-8100 được thiết kế cho các ứng dụng thu thập dữ liệu nhúng. Máy tính tích hợp 1 hoặc 2 cổng serial RS-232/422/485 và cổng LAN Ethernet kép 10/100 Mbps, cũng như ổ cắm Mini PCIe để hỗ trợ các module di động. Những khả năng giao tiếp linh hoạt này giúp người dùng thích ứng linh hoạt máy tính UC-8100 với nhiều giải pháp truyền thông phức tạp.

Máy tính UC-8100 xây dựng dựa trên bộ xử lý Cortex-A8 đã được tối ưu hóa cho sử dụng trong các hệ thống giám sát năng lượng, nhưng nó cũng có thể áp dụng rộng rãi cho các giải pháp công nghiệp khác nhau. Với tùy chọn giao diện linh hoạt, máy tính nhúng nhỏ gọn này là một cổng giao thức an toàn, đáng tin cậy để thu thập và xử lý dữ liệu tại hiện trường cũng như một nền tảng truyền thông hữu ích cho nhiều triển khai quy mô lớn khác.

Tất cả đơn vị sản phẩm đều được kiểm tra kỹ lưỡng trong buồng thử nghiệm, đảm bảo rằng các nền tảng máy tính là phù hợp cho các ứng dụng môi trường nhiệt độ rộng.

Từ khi nhiều giao thức công nghiệp trước đây không còn phù hợp với công nghệ IoT, việc gửi dữ liệu từ các thiết bị cạnh tới một đám mây dữ liệu thường tiêu hao nhiều nguồn tài nguyên kỹ thuật. Một công cụ phần mềm tùy chọn được tích hợp trong máy tính UC-8100 là ThingsPro™, một bộ phần mềm quản lý thiết bị và thu thập dữ liệu được tích hợp, bao gồm hỗ trợ giao thức Modbus nói chung, cũng như MQTT giao thức truyền thông IoT nói riêng, giúp nó dễ dàng chuyển đổi trường dữ liệu tới một cơ sở dữ liệu từ xa chỉ trong một vài thao tác đơn giản.

Hardware Specifications
• Computer
CPUARMv7 Cortex-A8 300/600/1000 MHz
USBUSB 2.0 hosts x 1, Type A connector
DRAMDDR3 SDRAM:UC-8112-LX/LX1: 512 MB
UC-8162-LX: 512 MB
UC-8132-LX: 256 MB
UC-8131-LX: 256 MB
OS (pre-installed)Debian 8 (Kernel 4.1)
• Storage
Main Storage• 1 GB SD card with OS pre-installed (UC-8131/8132/8162 only)
• 2 GB micro SD card with OS pre-installed (UC-8112-LX/LX1 only)
Storage ExpansionSD socket for storage expansion (UC-8112 only)
• Ethernet Interface
LANAuto-sensing 10/100 Mbps ports (RJ45) x 2
Magnetic Isolation Protection1.5 kV built-in
• Serial Interface
Serial StandardsRS-232/422/485 ports, software-selectable (5-pin terminal block connector) x 1 or 2
Console PortRS-232 (TxD, RxD, GND), 4-pin pin header output (115200, n, 8, 1)
• Serial Communication Parameters
Data Bits5, 6, 7, 8
Stop Bits1, 1.5, 2
ParityNone, Even, Odd, Space, Mark
Flow ControlXON/XOFF, ADDC® (automatic data direction control) for RS-485
BaudrateMax. 921600 bps
• Serial Signals
RS-232TxD, RxD, RTS, CTS, GND
RS-422TxD+, TxD-, RxD+, RxD-, GND
RS-485-4wTxD+, TxD-, RxD+, RxD-, GND
RS-485-2wData+, Data-, GND
• LEDs
SystemPower x 1, USB x 1, SD x 1, signal strength x 3 (UC-8112/8162/8132 with cellular module)
LAN10M/100M on connector
ProgrammableDiagnosis x 3
• Switches and Buttons
Push ButtonInitially configured to return a diagnostic report, and to reset the device to factory defaults
• Physical Characteristics
HousingPolycarbonate plastic
Weight224 g (0.50 lb)
Dimensions101 x 27 x 128 mm (3.98 x 1.06 x 5.04 in)
MountingDIN-rail, wall (with optional kit)
• Environmental Limits
Operating TemperatureStandard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature-40 to 80°C (-40 to 176°F)
Ambient Relative Humidity5 to 95% (non-condensing)
Anti-Vibration2 Grms @ IEC 60068-2-64, random wave, 5-500 Hz, 1 hr per axis (without any USB devices attached)
Anti-Shock20 g @ IEC 60068-2-27, half sine wave, 30 ms
• Power Requirements
Input Voltage12 to 24 VDC (3-pin terminal block, V+, V-, SG)
Input Current• 450 mA @ 12 VDC
• 225 mA @ 24 VDC
Power Consumption5.4 W (without cellular module and external USB device attached)
• Standards and Certifications
SafetyUL 60950-1
EMCEC 55032/24
EMICISPR 32, FCC Part 15B Class A
EMSIEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV
IEC 61000-4-5 Surge: DC Power: 0.5 kV
IEC 61000-4-6 CS: 3 V
IEC 61000-4-8 PFMF: 1 A/m, 60 s
Green ProductRoHS, CRoHS, WEEE
• Reliability
Alert ToolsBuilt-in RTC (real-time clock)
Automatic Reboot TriggerBuilt-in WDT (watchdog timer)
• MTBF (mean time between failures)
TimeUC-8162-T-LX: 301,648 hrs
UC-8132-T-LX: 302,648 hrs
UC-8131-T-LX: 315,063 hrs
UC-8112-T-LX: 1,181,598 hrs
UC-8162-LX/UC-8132-LX: 1,195,173 hrs
UC-8131-LX: 1,465,546 hrs
UC-8112-LX: 1,149,242 hrs
StandardTelcordia (Bellcore) Standard TR/SR
• Warranty
Warranty Period5 years
DetailsSee www.moxa.com/warranty
Software Specifications
• Linux
OSDebian 8
Web Server (Apache)Allows you to create and manage web sites; supports PHP and XML
Terminal Server (SSH)Provides secure encrypted communications between two un-trusted hosts over an insecure network
KernelGNU/Linux 4.1
System ShellDASH (default), BASH
Text Editorvim, nano
Internet Protocol SuiteTCP, UDP, IPv4, IPv6, SNMPv2, ICMP, ARP, HTTP, CHAP,PAP,DHCP, NTP,NFS, SSH, PPP, SFTP, RSYNC, SSL
Programming Language SupportPHP, Perl, Python
Internet Security SuiteOpenVPN, iptables
Cryptographic Hardware AcceleratorsAES, SHA, OpenSSL
Self DiagnosisCheck status of system and hardware component via software method
Linux Board Support Packages (BSP)• GCC C/C++ cross development tool chain
• Bootloader/ Kernel/ filesystem
Cellular Networking(UC-8132-LX, UC-8162-LX, UC-8112-LX only)• WVDIAL: Point-to-Point Protocol dialer that dials a modem and starts pppd to connect to the Internet.
• QMI (Qualcomm MSM Interface): Glib-based library for talking to WWAN modems and devices
Cybersecurity
• Secure Boot: A novel authentication algorithm proposed to secure platform integration. Only trusted Linux kernel and bootloader should be executed (Patent Pending).
• SUDO Mechanism: Sudo (sometimes considered short for Super-user Do) is a program designed to let system administrators allow some users to execute some commands as root (or another user). The basic philosophy is to give as few privileges as possible but still allow people to get their work done, and the Root account is disabled by default.
• Security Update of existing software packages: All packages in the UC-8100 could be updated for security purposes via Debian or Moxa’s Advanced Packaging Tool (APT) server.
• USB Protection: Provides a mechanism for disabling USB function to avoid USB stick malware attacks.
• SD Write Protection: Provides a mechanism for disabling SD write permission both in the filesystem SD and extended storage SD. (Note: Extended storage SD is only supported by the UC-8112-LX).

To request a quote, indicate which items you are interested in below and click “Get a Quote”.

Available Models

Model No.Description
UC-8112-LX1RISC-based communication-centric computing platform with 1 GHz CPU, Mini PCIe socket for cellular, 2 Ethernet, serial ports, 2 GB MicroSD (OS pre-installed), 1 GB SD Card, USB port, Micro SD Socket, and Debian 8
UC-8131-LXRISC-based communication-centric computing platform with 300 MHz CPU, 2 Ethernet, 1 Serial port, 1 GB SD (OS pre-installed), USB Port and Debian 8
UC-8132-LXRISC-based communication-centric computing platform with 300 MHz CPU, Mini PCIe socket for cellular, 2 Ethernet, 2 serial ports, 1 GB SD (OS pre-installed), USB port and Debian 8
UC-8162-LXRISC-based communication-centric computing platform with 600 MHz CPU, Mini PCIe socket for cellular, 2 Ethernet, 2 serial ports, 1 GB SD (OS pre-installed), USB port and Debian 8
UC-8112-LXRISC-based communication-centric computing platform with 1 GHz CPU, Mini PCIe socket for cellular, 2 Ethernet, serial ports, 2 GB MicroSD (OS pre-installed), USB port, Micro SD Socket, and Debian 8
UC-8112-LX-CGRISC-based communication-centric computing platform with 1 GHz CPU, 512MB RAM, Mini PCIe socket for cellular, 2 Ethernet, 2 serial ports, 2 GB MicroSD (OS pre-installed), USB port, 4GB SD Card, Debian 7, and ThingsPro 1.2 Software Suite
UC-8132-LX-CGRISC-based communication-centric computing platform with 300 MHz CPU, 256MB RAM, 2 Ethernet, 2 Serial port, 4 GB SD (OS pre-installed), USB Port, Debian 7, and ThingsPro 1.2 Software Suite

Optional Accessories

 Other Accessories

Model No.Description
CELLULAR-LTE-USCellular Package
CELLULAR-LTE-EUCellular Package
WiFi-BGNWiFi Package

 Antennas

Model No.Description
ANT-3G-SMASMA male antenna for cellular, support bands: 850/900/1800/1900/2100 MHz
ANT-LTE-OSM-03-3m BKMulti-band antenna that covers 700-2700 MHz. Specially designed for 2G, 3G, and 4G applications. Magnetic mounting is available.
ANT-LTE-ASM-04 BKLTE Stick antenna that covers 704-960/1710-2620 MHz providing omnidirectional radiation with a gain of 4.5 dBi.
ANT-LTE-ASM-05 BKLTE stick antenna that covers 704-960/1710-2620 MHz with a gain of 5 dBi.
ANT-LTE-OSM-06-3m BK MIMOMulti-band antenna that covers 700-2700/2400-2500/5150-5850 MHz frequencies. Screw-fastened mounting and full IP67 waterproofing are available.
ANT-GPS-OSM-05-3M26 dBi, 1572 MHz, L1 band antenna for GPS

 Cables

Model No.Description
A-CRF-MHFSFi-PEX MHF (male, on cellular module) to SMA (female, on top cover) adaptor with cable. When you need to install GPS antenna or the second cellular antenna.
CRF-MHF/SMA(M)-14.2i-PEX MHF (male, on cellular module) to RP-SMA (female, on top cover) adapter with cable. For when you need to install a second WiFi antenna.
CBL-F9DPF1x4-BK-100Console cable with 4-pin connector

 Adaptors / Power Cords

Model No.Description
PWC-C7CN-2B-1832.5A/250V China (CN) power cord, 183 cm length
PWC-C7US-2B-18310A/125V US power cord, 183 cm length
PWC-C7EU-2B-1832.5A/250V Continental European (EU) power cord, 183 cm length
PWC-C7UK-2B-1832.5A/250V United Kingdom (UK) power cord, 183 cm length
PWC-C7AU-2B-1832.5A/250V Australian (AU) power cord, 183 cm length
PWR-24270-DT-S1Power Adapter

 Wireless LAN Antennas

Model No.Description
ANT-WDB-ARM-022.4/5.5 GHz 2 dBi dual-band antenna, RP-SMA (male) connector

White Paper

How to Choose a Good Computing Platform for Your IIoT

The market today is flooded with embedded solutions for the Industrial IoT. You can now choose from a wide variety of RISC-based embedded computers, single-board computers, and development boards to implement your IIoT solutions. With single-board computers such as Raspberry Pi available for for as low as US$ 40 per board, is it a good strategy to cast your loT with these development boards? What are some of the key factors that you must consider when choosing an embedded computing solution for your industrial applications?…… more

 


 

White Paper

Building a Future-Proof Data Processing Solution with Intelligent IoT Gateways

To date, most discussions about the Industrial Internet of Things (IoT) have been about connecting new devices and rapidly bringing them online. In this white paper we look at the implications of bringing such a large number of devices online, namely, the need for efficient methods to collect information from these devices, and discuss how to handle the large amount of data collected from these devices.
Industrial IoT solutions are judged on their ability to adapt to various data acquisition needs and how they can transform the data collected from devices into useful business insights that can help decision makers. What makes an Industrial IoT solution truly stand out is the flexible data handling possibilities that it can provide…….more


White Paper

Developing a Data Acquisition Platform for Industrial IoT Applications

The impact the Internet has had on the way humans live their lives has been unprecedented. It has allowed us to communicate and interact with each other in ways previously unimaginable. Recently, it has opened the door for what many are describing as something that will become more important to our everyday lives than the Internet, the Internet of Things (IoT). One of the most exciting possibilities is in industrial applications, more commonly referred to as the Industrial Internet of Things (Industrial IoT), where communication and interaction capabilities can be extended to devices or things used for factory automation, renewable energy applications, smart grids, intelligent transportation systems, and even oil and gas applications……more


Application Notes

Accelerate your IIoT-Ready Applications with Smart Industrial Computing

Data is at the heart of the Internet of things (IoT). To make critical data-informed decisions, businesses first need to capture and collect data from all sorts of devices over the Internet before converting the data into valuable business information. Moxa has applied its rich experience in the industrial automation field to provide industrial computing solutions that integrate data acquisition and device management for large-scale, Industrial IoT applications. In this brochure, we will examine several typical applications to see how Moxa’s solutions can help businesses conquer the challenges in the Industrial IoT environments……..more


Accelerate OT-IT Integration in Your IIoT with ThingsPro™ Suite 2

For many system integrators and engineers, a key challenge in the Internet of Things (IIoT) is achieving robust and secure data transfer from operational technology (OT) based devices to IT-based cloud services to enable secure access of IIoT devices over the Internet. Watch this video to learn how Moxa’s ThingsPro Suite 2 can help you simplify your large-scale IIoT deployments.

To learn more about Moxa’s ThingsPro Suite, visit https://www.moxa.com/Event/industrial-computers/thingspro-data-acquisition-device-management-platform/index.htm

backtotop
my-tnh-risc-tp-trung-vo-giao-tip-uc-8100-moxa-vit-nam