Power Quality Analyzer Sonel PQM-707 is an autonomous meter allowing for versatile measurement, analysis, and registration of energy networks parameters DC and 50/60Hz, including the quality of electric energy in accordance with the European standard EN 50160 and the Regulation of the Minister of Economy on detailed conditions of the  electro-energetic system functioning. All parameters are measured in the S class of the IEC 61000-4-30 STANDARD guaranteeing high accuracy of measurements.
The largest in this class of analyzers 7-inch colour touch screen enables intuitive and ergonomic operation. Thanks to the built-in lithium-ion battery, the analyzer allows for efficient work during the measurement without the necessity of connecting an external AC adapter.

The analyzer is directed to a very wide range of users, with particular reference to the maintenance staff. Due to its mobility and autonomy, any problems occurring in the supply networks can be diagnosed on the spot. High measurement category (CAT IV 600V) makes the analyzer very safe, which provides peace of mind during every day use.
The analyzer can be used in virtually all kinds of networks with rated voltage from 54V to 760V directly, or indirectly via transformers.
Because of that PQM-707 can be used in the field of professional power engineering, maintenance services in industrial plants, as well as among those providing services focused on network analysis.

Features:

  • 7″ touch screen – intuitive operating
  • CAT IV 600V – high safety
  • all parameters acc. to class S – high accuracy of measurements
  • Li-Ion rechargeable battery – higher mobility
  • removable memory card – recording data with no restrictions

Possible measurements:

  • Measurements according to EN 50160,
  • Voltage L1, L2, L3, N-PE (five inputs),
    – average, minimum, maximum values, range to 760 V, ability to work with voltage transformers,
  • Current L1, L2, L3, N (four inputs),
    – average, minimum, maximum values, measurement current with range to 3 kA (depends on used clamp), ability to work with current transformers,
  • Crest factor for voltage and current,
  • Frequency from 40 Hz to 70 Hz ,
  • Active, reactive, distortion, apparent power, including the type of reactive power (capacitive, inductive),
  • Power recording:
    • Budeanu method,
    • IEEE 1459,
  • Active, reactive, apparent energy,
  • Power factor, cosφ, tgφ,
  • Up to 40th harmonics for voltage and current,
  • Total Harmonic Distortion (THD) for voltage and current,
  • Short-term (PST) and long-term (PLT) flicker,
  • Unbalance of voltage and current,
  • Current and voltage events registration including waveforms and RMS graphs half period,
  • Inrush current
  • Calculator of energy tariffs
  • ANALYZER MEASURES AND RECORDS ACCORDING TO THE IEC 61000-4-30 CLASS S STANDARD.

The device is designed to work with networks:

  • with nominal frequency 50/60Hz,
  • with nominal voltage: 64/110 V; 110/190V; 115/200V; 127/220V; 220/380V; 230/400V; 240/415V; 254/440V; 290/500 V; 400/690V.
  • DC network

Supported networks:

  • single-phase,
  • two-phase with common N conductor,
  • three-phase star connection with and without N conductor,
  • three-phase delta.

Parameters of analyzer:

ParametrMeasurement rangeMax. resolutionAccuracy
Alternating voltage (TRMS)0,0…760,0V0,01 % Unom±0,5% Unom

Crest Factor

Voltage1,00…10,00
(≤1.65 for 690 V voltage)
0,01±5%
Current1,00…10,00 (≤3,6 Inom)0,01± 5%wm
Alternating current
TRMS
depending on clamp*0,01 % Inom±2% m.v. for m.v. ≥ 10% Inom
±2% Inom  for m.v. < 10% Inom
(error does not account for clamps error)
Frequency40,00…70,00 Hz0,01Hz±0,05 Hz

Active, reactive, apparent
and distortion power

depending of configuration
(trasformers, clamp)
up to for
decimal places
depending on configuration
(transformers, clamps)
Active, reactive apparent energydepending of configuration
(transformers, clamp)
up to for
decimal places
as power error
cosφ and power factor (PF)0,00…1,000,01±0,03
Tgφ0,00…10,000,01depends on active and reactive power error
Harmonics
 
Voltageas for alternating voltage
True RMS
as for alternating voltage
True RMS
±5% m.v. for m.v. ≥ 3% Unom
±0,15% Unom for m.v.. < 3% Unom 
Currentas for alternating voltage
True RMS
as for alternating voltage
True RMS
±5% m.v. for m.v.. ≥ 10% Inom
±0,5% Inom for m.v. < 10% Inom
THDVoltage0.0..100.0%
(in regards to the rms value)
0,1%±5%
Current±5%
Flicker severity PST, PLT0,40…10,000,01±10%
Voltage asymmetryVoltage
and current
0,0…10,0%0,1%±0,15%
(absolute error)
Inrush currentdepending on clamp*0,01% Inom±4% m.v. for m.v. ≥ 10% Inom
±4% Inom for m.v. < 10% Inom
(RMS1/2)  

*Clamp F-1A, F-2A, F-3A: 0..3000 A (10000 Ap-p) *Clamp C-4A: 0..1000 A (3600 Ap-p)*Clamp C-5A: 0..1000 A (3600 Ap-p)*Clamp C-6A: 0..10 A (36 Ap-p) *Clamp C-7A: 0…100 A (360 Ap-p)

backtotop
pqm-707-safenergy-i-din-moxa-ti-vit-nam