Features and Benefits               MiiNePort embedded serial device servers

  • IEEE 802.3af compliant PoE pass-through
  • Use Moxa’s high quality and reliable second generation MiiNe SoC
  • Versatile choice of operation modes fulfill specific application requirements
  • Green design with extremely low power consumption
  • MiiNePort NetEZ Technology makes integration incredibly easy
  • Highly compact embedded device module

 

Overview

Moxa’s MiiNePort E3 series embedded device servers are designed for manufacturers who want to add sophisticated network connectivity to their serial devices with minimal integration effort. The MiiNePort E3 is empowered by the MiiNe, Moxa’s second generation SoC, which supports 10/100 Mbps Ethernet, up to 921.6 kbps serial baudrate, a versatile selection of ready-to-use operation modes, and requires only a small amount of power. By using Moxa’s innovative NetEZ technology, the MiiNePort E3 can be used to convert any device with a standard serial interface to an Ethernet enabled device in no time. In addition, the MiiNePort E3 is a compact embedded device server with an RJ45 connector, making it easy to fit into virtually any existing serial device.

 

The MiiNe—Moxa’s 2nd Generation SoC

The MiiNe was created to provide manufacturers with a competitive embedded serial-to-Ethernet solution. The MiiNePort E3, which uses the MiiNe for its SoC, is a compact embedded device server that has the lowest power consumption of similar products. The MiiNe has the following features:
?Designed for serial-to-Ethernet applications
?Uses an ARM core
?Uses Moxa’s own advanced UART technology
?2 MB Flash and 4 MB SDRAM memory built in

• Form Factor
TypePin header module
Dimensions35 x 52.5 x 18 mm (1.38 x 2.07 x 0.71 in)
Weight12 g (0.03 lb)
• System Information
CPU32-bit ARM Core
RAM4 MB built in
Flash2 MB built in
• Ethernet Interface
Number of Ports1
Speed10/100 Mbps, auto MDI/MDIX
ConnectorRJ45 (magnetic)
Magnetic Isolation Protection1.5 kV built-in
LEDs10BASE-T & 100BASE-TX Link Activity
PoE Pass-through802.3af compliant
• Serial Interface
Number of Ports1
Transmission FormatStandard TTL
• Serial Communication Parameters
Data Bits5, 6, 7, 8
Stop Bits1, 1.5, 2
ParityNone, Even, Odd, Space, Mark
Flow ControlRTS/CTS, DTR/DSR, XON/XOFF
BaudrateMiiNePort E3: 50 bps to 230.4 kbps
MiiNePort E3-H: 50 bps to 921.6 kbps
NoteNon-standard baudrates supported
• Serial Signals
TTLTxD, RxD, RTS, CTS, DTR, DSR, DCD, RST (reset circuit), GND
• Digital I/O Pins
GPIO4 configurable I/O pins
• Software
Network ProtocolsICMP, ARP, IPv4, TCP, UDP, DHCP, HTTP, SNMP V1, SMTP, TFTP, Auto IP, Telnet, BOOTP
Configuration OptionsWeb Console, Serial Console (Serial Command Mode), Telnet Console, Windows Utility
Windows Real COM DriversWindows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded
Fixed TTY DriversSCO Unix, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X
Linux Real TTY DriversLinux 2.4.x, 2.6.x, 3.x
Operation ModesReal COM, TCP Server, TCP Client, UDP, Ethernet Modem, RFC2217
NetEZ FunctionEZPower, EZPage, SCM (Serial Command Mode), AutoCFG
• Environmental Limits
Operating TemperatureStandard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Storage Temperature (package included)-40 to 60°C (-40 to 140°F)
Ambient Relative Humidity5 to 95% (non-condensing)
• Power Requirements
Input Voltage3.3 to 5 VDC
Input Current157 mA @ 3.3 VDC
• Standards and Certifications
EMCEN 55032/24
EMICISPR 32, FCC Part 15B Class B
EMSIEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power 1 kV; Signal 0.5 kV
IEC 61000-4-5 Surge: Power 2 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m
IEC 61000-4-8 PFMF
IEC 61000-4-
VibrationIEC 60068-2-6, 5-25.7 Hz: ±15 mm; 25.7-500 Hz: 20g; 3 hours/axis
ShockIEC 60068-2-27, 500g/2ms
DropIEC 60068-2-34, IEC 60068-2-32, ISTA-2A
NoteStandards testing is done with the MiiNePort E3-ST or MiiNePort E3-H-ST starter kits.
• Reliability
MTBF (mean time between failures)Time: 3,608,031 hrs
Standard: Telcordia (Bellcore) TR/SR
• Warranty
Warranty Period5 years
DetailsSee www.moxa.com/warranty

Available Models

Model No.Description
MiiNePort E3Embedded device server for TTL devices, pin header module, 10/100M with RJ45 connector, 50 bps to 230.4 Kbps baudrate, 0 to 55°C operating temperature
MiiNePort E3-HEmbedded device server for TTL devices, pin header module, 10/100M with RJ45 connector, 50 bps to 921.6 Kbps baudrate, 0 to 55°C operating temperature
MiiNePort E3-TEmbedded device server for TTL devices, pin header module, 10/100M with RJ45 connector, 50 bps to 230.4 Kbps baudrate, -40 to 85°C operating temperature
MiiNePort E3-H-TEmbedded device server for TTL devices, pin header module, 10/100M with RJ45 connector, 50 bps to 921.6 Kbps baudrate, -40 to 85°C operating temperature
MiiNePort E3-STStarter kit for the MiiNePort E3 Series, module included
MiiNePort E3-H-STStarter kit for the MiiNePort E3-H Series, module included

Dimensions

 

Pin Assignment

backtotop
thit-b-nhng-tn-hiu-serial-10-100mbps-miineport-e3-moxa-vit-nam