MIC-2

Digital insulation meter MIC-2 automatically select insulation measurements range at 250 and 500 V test voltages. This insulation meter is suited for insulation resistance measurements of electric installations, motors and other electric devices. MIC-2 can also be used to measure voltage up to 600 V AC and resistance up to 1999. Instrument is easy to use, professional tool in small and incredibly ergonomic case.

Insulation resistance measurement:

• the measurement voltage is selected between the two values 250 V or 500 V,
• on-line insulation resistance measurement,
• automatic discharge of tested object’s capacitance after measurement of insulation resistance,
• acoustic determination of 5 seconds time intervals that facilitates to take time characteristics during insulation resistance measurement,
• protection against live objects.

Low voltage resistance measurement in range 0…2000 Ω:

• current measurement <10 mA with resolution 0.1 Ω,
• quick acoustic signalling (beeper) for circuit resistance below 10 Ω.

Pomiar napięć stałych i przemiennych w zakresie 0…600 V:

• samoczynne wykrywanie rodzaju napięcia (stałe/przemienne).

AC/DC voltage measurement in range 0…600 V:

• automatic detection AC/DC voltage.

Autoranging.

Suitable for 50 Hz and 60 Hz network.

Backlit display.

„AUTO-OFF” function.

Meter meets the requirements of the standard EN 61557.

Insulation resistance measurement:
U_ISO=250 V
Measurement range: IEC 61557 – 2: 250 kΩ…1000 MΩ

U_ISO=500 V
Measurement range: IEC 61557 – 2: 500 kΩ…1999 MΩ

Resistance measurement:

• continuous audible signal for R < 10 Ω
• measurement current (with open terminals for Ubat > 3.0 V): < 10 mA
• max voltage on open terminals: 4…24 V
• max interference voltage for which measurement is still possible: +7 V/-1 V DC, 5 V AC

AC/DC voltage measurement

„m.v.” – measured value