MGate 5118 Series

1-port CAN-J1939 to Modbus/PROFINET/EtherNet/IP gateways

Danh mục: Fieldbus Gateways Từ khóa: Bộ chuyển đổi giao thức Modbus, Bộ chuyển đổi giao thức sang Ethernet, Bộ chuyển đổi tín hiệu serial, Đại lý phân phối hàng đầu của Moxa tại Việt Nam, kết nối viễn thông, Moxa Việt Nam

MGate 5118 Series Datasheet

MGate 5118 Quick Installation Guide

MGate 5118 Series User’s Manual

DSU

Mô tả Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
Thông số Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
Ordering Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering

Features

Key-in-free J1939 command auto detection
Built-in J1939 traffic monitoring/diagnostics/live-list tools
Supports J1939 to Modbus RTU/ASCII/TCP, EtherNet/IP, PROFINET protocol conversion
Ready for hazardous locations: C1D2, ATEX, IECEx
MicroSD card for configuration backup/duplication, and event log
2 kV CANbus and Modbus serial port isolation
-40 to 75°C wide operating temperature models available
IEC 62443-4-2 compliant

Overview

The MGate 5118 series industrial protocol gateways support the SAE J1939 protocol, which is based on CANBus (Controller Area Network). SAE J1939 is used to implement communication and diagnostics among vehicle components, diesel engine generators, and compression engines, and is suitable for the heavy duty truck industry and backup power systems. It is now common to use an engine control unit (ECU) to control these kinds of devices, and more and more applications are using PLCs for process automation to monitor the status of J1939 devices connected behind the ECU.
The MGate 5118 series gateways support the Modbus RTU/ASCII/ TCP, EtherNet/IP, and PROFINET protocols to support most PLC applications. Devices that support the J1939 protocol can be monitored and controlled by PLCs and SCADA systems that use the Modbus RTU/ASCII/TCP, EtherNet/IP, and PROFINET protocols. With the MGate 5118, you can use the same gateway in a variety of PLC environments

• Industrial Protocols
Protocols	SAE J1939, Modbus RTU/ASCII/TCP, PROFINET, EtherNet/IP
Protocol Conversion	• J1939 to Modbus RTU/ASCII (Master/Slave) • J1939 to Modbus TCP (Client/Server) • J1939 to EtherNet/IP (Scanner/Adapter) • J1939 to PROFINET (I/O Device)
• Ethernet Interface
Protocols	Modbus TCP (Client/Server), PROFINET (I/O device), EtherNet/IP (Scanner/Adapter)
Number of Ports	2 (1 IP address, supports Ethernet cascading)
Speed	10/100 Mbps, Auto MDI/MDIX
Connector	8-pin RJ45
Magnetic Isolation Protection	1.5 kV (built-in)
• CAN-J1939 Serial Interface
Protocols	SAE J1939
Number of Ports	1
Connectors	6-pin terminal block
Terminator	120 Ω
Isolation	2 kv (built-in)
Data Rate	250 kbps and 500 kbps
• Modbus Serial Interface
Protocols	Modbus RTU/ASCII (Master/Slave)
Number of Ports	1
Serial Standards	RS-232/422/485, software selectable
Connectors	DB9 male
Pull High/Low Resistor for RS-485	1 kΩ, 150 kΩ
Terminator for RS-485	120 Ω
Isolation	2 kV (built-in)
• Modbus Serial Communication Parameters
Data Bits	8
Stop Bits	1, 2
Parity	None, Even, Odd, Space, Mark
Flow Control	RTS/CTS, RTS Toggle
Baudrate	50 bps to 921.6 kbps
• Modbus Serial Signals
RS-232	TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422	Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w	Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w	Data+, Data-, GND
• Software
Configuration Options	Web console
Utility	Device Search Utility (DSU) for Windows 95, 98, ME, NT, 2000, Windows XP, Server 2003, Vista, Server 2008 (x86/x64), Windows Server 2008 R2, Windows 7/8/8.1/10 (x86/x64), Windows Server 2012 (x64), Windows 2012 R2
Network Protocols	TCP/IP, UDP, HTTP, SMTP, NTP, DNS, DHCP Client, SNMP (v1, v2, v3), MIB-II, ARP, Telnet
Support	MXview, MXconfig, IEC 62443-4-2
• Physical Characteristics
Housing	Metal, IP30
Weight	589 g (1.30 lb)
Dimensions	45.8 x 105 x 134 mm (1.8 x 4.13 x 5.28 in)
• Environmental Limits
Operating Temperature	Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)
Vibration	IEC 60068-2-6, IEC 60068-2-64
Shock	IEC 60068-2-27
Drop	IEC 60068-2-32
• Power Requirements
Input Voltage	12 to 48 VDC
Input Current	• 416 mA @ 12 VDC • 195 mA @ 24 VDC; • 110 mA @ 48 VDC
Power Connector	Terminal block
• Standards and Certifications
Safety	EN 60950-1(LVD), UL 61010-2-201
Hazardous Location	Class I Division 2, ATEX, IECEx (Note: Certification is underway. Please contact a Moxa slaes representative for details.)
EMC	EN 61000-6-2/6-4
EMI	CISPR 22, FCC Part 15B Class B
EMS	IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV IEC 61000-4-5 Surge: Power 1 kV; Signal: 1 kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8 PFMF: 10 A/m
• Reliability
Alarm Functions	Relay, email, SNMP trap
Alert Tools	Built-in buzzer
Storage Card Slot	1 microSD (SDHC) card slot; supports up to 32 GB
• MTBF (mean time between failures)
Time	727,873 hrs
Standard	Telcordia SR332
• Warranty
Warranty Period	5 years
Details	See www.moxa.com/warranty

Available Models

	Model No.	Description
	MGate 5118	1-port J1939 to Modbus/PROFINET/EtherNet/IP gateway, 0 to 60°C operating temperature
	MGate 5118-T	1-port J1939 to Modbus/PROFINET/EtherNet/IP gateway, -40 to 75°C operating temperature

Optional Accessories

Wireless AP Mounting Kit

	Model No.	Description
	WK-51-01	Wall-mounting kit, 51mm wide

Connectors

	Model No.	Description
	Mini DB9F-to-TB	DB9 Female to Terminal Block connector