EDS-P510 Series

7+3G-port Gigabit managed Ethernet switches with 4 IEEE 802.3af PoE ports

Danh mục: , Từ khóa: , , , , , , ,
switch-cong-nghiep-7-cong-10/100-3-cong-giga-EDS-P510

Datasheet

Manual

Drivers and Software

How to select

Tính năng và tiện ích

  • 4 cổng combo Ethernet và PoE tuân thủ IEEE 802.3af
  • Cung cấp lên tới 15.4 W ở mỗi cổng PoE
  • Phát hiện tiêu thụ điện năng thông minh, kiểm tra lỗi PD, chức năng tạo lịch cho PoE
  • 3 cổng combo Gigabit (khe cắm 10/100/1000BaseT(X) hoặc 100/1000BaseSFP); 2 cổng cho dự phòng ring và 1 cổng cho uplink
  • Turbo Ring và Turbo Chain (thời gian phục hồi < 20 ms @ 250 switches), RSTP/STP, MSTP cho dự phòng mạng
  • Hỗ trợ MXstudio giúp quản lý mạng công nghiệp trực quan
  • V-ON™ đảm bảo dữ liệu đa hướng và phục hồi mạng video cấp mili giây

 

Giới thiệu

Dòng switch Ethernet dự phòng quản lý Gigabit EDS-P510 có 4 cổng Ethernet 10/100BaseT(X) (PoE) tuân thủ 802.3af và 3 cổng combo Ethernet Gigabit. Switch EDS-P510 cung cấp tới 15.4 W cho mỗi cổng PoE, cho phép nguồn điện được cung cấp và kết nối tới thiết bị (như camera an ninh, điểm truy cập không dây, IP điện thoại di động) khi nguồn AC không có sẵn hoặc cung cấp cục bộ là rất tốn kém. Switch EDS-P510 có độ thuận tiện cao, cổng quang SFP của nó có thể truyền dữ liệu khoảng cách lên tới 80 km từ thiết bị tới trung tâm kiểm soát với khả năng chống EMI cao. Switch Ethernet hỗ trợ tính năng bảo mật và quản lý nâng cao. Dòng EDS-P510 được thiết kế đặc biệt cho các ứng dụng tự động hóa bảo mật như là giám sát IP và cổng hệ thống entry, có thể mang lại lợi ích từ một cấu trúc backbone và PoE ổn định.

Tính năng và tiện ích vượt trội

  • Giao diện dòng lệnh (CLI) để định cấu hình cho các chức năng quản lý chính nhanh chóng.
  • Tùy chọn DHCP 82 để gán địa chỉ IP với các chính sách khác nhau.
  • Hỗ trợ giao thức EtherNet/IP and Modbus TCP để quản lý và giám sát thiết bị.
  • Tương thích với giao thức PROFINET cho việc truyền tải dữ liệu.
  • Chức năng khóa cổng để ngăn chặn truy cập trái phép dựa trên địa chỉ MAC
  • IGMP snooping and GMRP để lọc lưu lượng multicast traffic
  • Port-based VLAN, IEEE 802.1Q VLAN, and GVRP để lập kế hoạch mạng dễ dàng.
  • QoS (IEEE 802.1p/1Q and TOS/DiffServ) để tăng tính xác định
  • Cổng Trunking để sử dụng tối ưu băng thông
  • RMON để giám sát mạng chủ động và hiệu quả.
  • SNMPv1/v2c/v3 cho các cấp quản lý mạng khác nhau.
  • Quản lý băng thông để ngăn chặn những sự cố mạng không lường trước.
  • Cảnh báo tự động thông qua Relay hoặc Email chuyển tiếp.

 

• Technology
StandardsIEEE 802.3af for Power-over-Ethernet
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3z for 1000BaseX
IEEE 802.3x for Flow Control
IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1s for Multiple Spanning Tree Protocol
IEEE 802.1Q for VLAN Tagging
IEEE 802.1p for Class of Service
IEEE 802.1X for Authentication
IEEE 802.3ad for Port Trunk with LACP
• Software Features
ManagementIPv4/IPv6, SNMP v1/v2c/v3, LLDP, Port Mirror, DDM, RMON, DHCP Server/Client, DHCP Option 66/67/82, BootP, TFTP, SMTP, RARP, Telnet, Syslog, SNMP Inform, Flow Control, Back Pressure Flow Control
Filter802.1Q VLAN, Port-Based VLAN, GVRP, IGMP v1/v2, GMRP
Redundancy ProtocolsSTP, RSTP, MSTP, Turbo Ring v1/v2, Turbo Chain, Link Aggregation
SecurityRADIUS, TACACS+, SSL, SSH, Port Lock
Time ManagementSNTP, NTP Server/Client, IEEE 1588v2 PTP (software-based)
Industrial ProtocolsEtherNet/IP, Modbus/TCP
MIBMIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9
• Switch Properties
Priority Queues4
Max. Number of VLANs64
VLAN ID RangeVID 1 to 4094
IGMP Groups1024
MAC Table Size8 K
Packet Buffer Size1 Mbit
• Interface
RJ45 Ports10/100BaseT(X) or 10/100/1000BaseT(X) auto negotiation speed
Fiber Ports100/1000BaseSFP slot
Console PortRS-232 (RJ45 connector)
PoE PinoutV+, V+, V-, V- for pin 1, 2, 3, 6 (Endspan, MDI Alternative A)
DIP SwitchesTurbo Ring, Master, Coupler, Reserve
Alarm Contact2 relay outputs with current carrying capacity of 0.5 A @ 48 VDC
Digital Inputs2 inputs with the same ground, but electrically isolated from the electronics.
• +13 to +30 V for state “1”
• -30 to +3 V for state “0”
• Max. input current: 8 mA
• Power Requirements
Input Voltage48 VDC, redundant dual inputs
Operating Voltage44 to 57 VDC
Input Current1.58 A @ 48 VDC
Overload Current ProtectionPresent
Connection2 removable 6-contact terminal blocks
Reverse Polarity ProtectionPresent
Power ConsumptionMax. 14.24 W full loading without PDs’ consumption
Power BudgetMax. 61.6 W for total PDs’ consumptionMax. 15.4 W for each PoE port
• Physical Characteristics
HousingMetal
IP RatingIP30 protection
Dimensions80.2 x 135 x 105 mm (3.16 x 5.31 x 4.13 in)
Weight1170 g (2.58 lb)
InstallationDIN-rail mounting, wall mounting (with optional kit)
• Environmental Limits
Operating TemperatureStandard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity5 to 95% (non-condensing)
• Standards and Certifications
SafetyUL 508
EMCEN 55032/24
EMICISPR 32, FCC Part 15B Class A
EMSIEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
IEC 61000-4-6 CS: Signal: 10 V
IEC 61000-4-8
MarineDNV, GL, LR, ABS, NK
ShockIEC 60068-2-27
FreefallIEC 60068-2-32
VibrationIEC 60068-2-6 
Note: Please check Moxa’s website for the most up-to-date certification status.
• MTBF (mean time between failures)
Time205,384 hrs
StandardTelcordia (Bellcore), GB

Available Models

 Model No.Description
EDS-P510Managed Gigabit Ethernet switch with 3 10/100BaseT(X) ports, 4 PoE 10/100BaseT(X) ports, and 3 combo 10/100/1000BaseT(X) or 100/1000BaseSFP slots for adding SFP-1G/1FE series Gigabit/fast Ethernet modules, 0 to 60°C operating temperature
EDS-P510-TManaged Gigabit Ethernet switch with 3 10/100BaseT(X) ports, 4 PoE 10/100BaseT(X) ports, and 3 combo 10/100/1000BaseT(X) or 100/1000BaseSFP slots for adding SFP-1G/1FE series Gigabit/fast Ethernet modules, -40 to 75°C operating temperature

Compatible Modules

SFP-1G Series

 Model No.Description
SFP-1G10ALCWDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 10 km transmission; TX 1310 nm, RX 1550 nm, 0 to 60°C operating temperature
SFP-1G10BLCWDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 10 km transmission; TX 1550 nm, RX 1310 nm, 0 to 60°C operating temperature
SFP-1GSXLCSFP module with 1 1000BaseSX port with LC connector for 0.5 km transmission, 0 to 60°C operating temperature
SFP-1GLSXLCSFP module with 1 1000BaseLSX port with LC connector for 2 km transmission, 0 to 60°C operating temperature
SFP-1GLXLCSFP module with 1 1000BaseLX port with LC connector for 10 km transmission, 0 to 60°C operating temperature
SFP-1GLHLCSFP module with 1 1000BaseLH port with LC connector for 30 km transmission, 0 to 60°C operating temperature
SFP-1GLHXLCSFP module with 1 1000BaseLHX port with LC connector for 40 km transmission, 0 to 60°C operating temperature
SFP-1GZXLCSFP module with 1 1000BaseZX port with LC connector for 80 km transmission, 0 to 60°C operating temperature
SFP-1GEZXLCSFP module with 1 1000BaseEZX port with LC connector for 110 km transmission, 0 to 60°C operating temperature
SFP-1G10BLC-TWDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 10 km transmission; TX 1550 nm, RX 1310 nm, -40 to 85°C operating temperature
SFP-1G20ALC-TWDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 20 km transmission; TX 1310 nm, RX 1550 nm, -40 to 85°C operating temperature
SFP-1G20BLC-TWDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 20 km transmission; TX 1550 nm, RX 1310 nm, -40 to 85°C operating temperature
SFP-1G40ALC-TWDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 40 km transmission; TX 1310 nm, RX 1550 nm, -40 to 85°C operating temperature
SFP-1G40BLC-TWDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 40 km transmission; TX 1550 nm, RX 1310 nm, -40 to 85°C operating temperature
SFP-1G20ALCWDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 20 km transmission; TX 1310 nm, RX 1550 nm, 0 to 60°C operating temperature
SFP-1G20BLCWDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 20 km transmission; TX 1550 nm, RX 1310 nm, 0 to 60°C operating temperature
SFP-1GLHLC-TSFP module with 1 1000BaseLH port with LC connector for 30 km transmission, -40 to 85°C operating temperature
SFP-1GLHXLC-TSFP module with 1 1000BaseLHX port with LC connector for 40 km transmission, -40 to 85°C operating temperature
SFP-1GZXLC-TSFP module with 1 1000BaseZX port with LC connector for 80 km transmission, -40 to 85°C operating temperature
SFP-1G10ALC-TWDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 10 km transmission; TX 1310 nm, RX 1550 nm, -40 to 85°C operating temperature
SFP-1G40ALCWDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 40 km transmission; TX 1310 nm, RX 1550 nm, 0 to 60°C operating temperature
SFP-1G40BLCWDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 40 km transmission; TX 1550 nm, RX 1310 nm, 0 to 60°C operating temperature
SFP-1GSXLC-TSFP module with 1 1000BaseSX port with LC connector for 0.5 km transmission, -20 to 75°C operating temperature
SFP-1GLSXLC-TSFP module with 1 1000BaseLSX port with LC connector for 2 km transmission, -40 to 85°C operating temperature
SFP-1GLXLC-TSFP module with 1 1000BaseLX port with LC connector for 10 km transmission, -40 to 85°C operating temperature

SFP-1FE Series

 Model No.Description
SFP-1FEMLC-TSFP module with 100Base multi-mode with LC connector for 4 km transmission, -40 to 85°C operating temperature
SFP-1FESLC-TSFP module with 100Base single-mode with LC connector for 40 km transmission, -40 to 85°C operating temperature
SFP-1FELLC-TSFP module with 100Base single-mode with LC connector for 80 km transmission, -40 to 85°C operating temperature

Optional Accessories

Category

 Model No.Description
EDS-SNMP OPC Server ProOPC server for integrating SNMP devices into HMI/SCADA systems

DIN Rail Power Supplies

 Model No.Description
DRP-240-48240W/5A DIN-Rail 48 VDC power supply with universal 85 to 264 VAC input or 120-370 VDC, -10~70°C operating temperature
DR-75-4875W/1.6A DIN-Rail 48 VDC power supply with universal 85 to 264 VAC or 120-370 VDC input, -10 to 60°C operating temperature
DR-120-48120W/2.5A DIN-Rail 48 VDC power supply with universal 88 to 132 VAC or 176 to 264 VAC input by switch, or 248-370 VDC, -10 to 60°C operating temperature

PoE Splitters & Injectors

 Model No.Description
SPL-24PoE splitters
INJ-24AGigabit high power IEEE 802.3af/at PoE+ injectors

Trial Software

 Model No.Description
MXviewIndustrial network management software designed for converged automation networks
MXconfigIndustrial network configuration tool
MXstudio Industrial Network Management SuiteIndustrial network management suite for installation, operation, maintenance, and diagnostics

FAQ: Is Your Network Infrastructure Ready for the IIoT?

The Industrial Internet of Things (IIoT) trend aims to improve efficiency and productivity by connecting different devices together as well as collecting and analyzing large volumes of data to offer accurate information. However, before reaping the benefits of the IIoT, users need to ensure that the correct infrastructure is in place. To make sure your network is ready for the IIoT, check out five of the most frequently mentioned questions.

FAQ_cover
2015 Industrial Ethernet Solutions Brochure

Build SMART Connectivity to Boost Your Industrial IoT Opportunities

The Industrial Internet of Things is evolving to achieve all kinds of information automation. Staying ahead of the curve leads to increased productivity, which crucially depends on high efficiency and availability of network connectivity. Moxa’s comprehensive product portfolio goes beyond meeting stringent industrial Ethernet standards, bringing vertical expertise to around-the-clock Industrial IoT operations around the world.

Check out this 24-page IES Brochure to get detailed information of the following products and solutions:
– Automation-Friendly Network Management Suite
– NAT/VPN/Firewall Secure Routers
– Industrial Ethernet Switches
– Industrial Wireless Connectivity
– Industrial Ethernet Gateways
– Field Networking and Automation Solutions

Download IES 2015 Brochure!

White Paper

Ensure Nonstop IP Surveillance with an Optimized Industrial Ethernet Network

If your CCTV system uses multicast transmission over a redundant ring, then even if your ring redundancy protocol is able to activate backup paths in a fraction of a second when a disconnection occurs, it could still take more than 2 minutes for your multicast video streams to recover. This is because a number of different protocols—including IGMP (Internet Group Management Protocol) and PIM-DM (Protocol Independent Multicast – Dense Mode)—are implemented to transmit your video packets around the network, and these standard protocols are not designed for mission-critical applications. In this white paper, we show how implementing an appropriate non-standard proprietary protocol can optimize your network for video stream transmission, and in this way overcome IGMP’s sluggishness.

V-ON_WP

V-ON Success Story Flyer

With the growing demand of safety-critical surveillance in industrial automation applications, engineers are facing the challenges of building a reliable network to ensure non-stop video transmission. In this success story, we give details about how Moxa’s advanced V-ON technology helps build a video-optimized network for a tramway project

 V-ON_Story

Tiếng Việt
backtotop
switch-ethernet-managed-7-3g-cng-gigabit-poe-moxa-pt-510