DA Series Expansion Modules

Expansion modules with time-synchronization ports, RS-232/422/485 and RS-232/485 serial ports, 10/100 Mbps LAN and unmanaged switch ports, 100 Mbps fiber LAN ports, and PCI development kit

Danh mục:
L20150416163912

Features and BenefitsSubstation Reference Book

  • IRIG-B time-synchronization module
  • Universal PCI expansion module
  • 4-port 10/100 Mbps LAN module
  • 4-port 100 Mbps Fiber LAN module
  • 8-port 10/100 Mbps unmanaged switch module
  • 8-port RS-422/485 serial module with terminal block connectors
  • 8-port RS-232/422/485 software-selectable serial modules with isolation protection
  • Fully compatible with Moxa embedded computers that have peripheral expansion slots

Overview

Moxa’s peripheral expansion modules, which come with serial ports, LAN ports, switch ports, fiber ports, time-synchronization IRIG-B ports, and PCI slots, give end-users the greatest flexibility for setting up industrial applications and are fully compatible with Moxa’s embedded computers that have perpheral expansion slots.
The serial port modules include an 8-port RS-232/422/485 module with either DB9 or terminal block connectors, and an 8-port RS- 422/485 module with terminal block connectors. Some modules are even designed with 2 kV digital isolation, making them fully suitable for the great demands of industrial applications that use serial communication. In addition, a 4-port LAN module, 8-port switch module, and 4-port fiber LAN module are available for setting up industrial communication applications with Ethernet-based devices. A universal PCI development kit is also available for PCI-based devices for expanding industrial applications at a reasonable cost.
The time-synchronization module features 3 digital inputs and 4 digital outputs and provides precision timing information using IRIG-B input signals. The module is designed for embedded computers that support the PCI/104 interface.
All modules are designed to offer the greatest flexibility for setting up applications and performing industrial tasks. In particular, users can swap out modules quickly and easily.

DA-LN04-RJ Hardware Specifications
• Ethernet Interface
LAN4 auto-sensing 10/100 Mbps ports (RJ45)
Magnetic Isolation Protection1.5 kV built-in
• Physical Characteristics
Weight198 g (0.44 lb)
Dimensions132 x 150 x 42 mm (5.20 x 5.91 x 1.65 in)
DA-SW08-RJ Hardware Specifications
• Ethernet Interface
LAN8 auto-sensing 10/100 Mbps unmanaged Ethernet switch ports (RJ45)
Magnetic Isolation Protection1.5 kV built-in
• Physical Characteristics
Weight200 g (0.44 lb)
Dimensions132 x 150 x 42 mm (5.20 x 5.91 x 1.65 in)
DA-UPCI-DK Hardware Specifications
• Universal PCI Expansion Adatper
PCI Slots1
Interface Bus32-bit Universal PCI (3.3 V and 5 V)
• Physical Characteristics
Weight195 g (0.43)
Dimensions132 x 150 x 42 mm (5.20 x 5.91 x 1.65 in)
MTBF (mean time between failures)11,053,266 hrs
DA-FX04-MM-ST-T Hardware Specifications
• Fiber Interface
Number of Ports4 (100BaseFX)
Fiber ModeMulti-mode
Connector TypeST
Optical Wavelength0 to 2 km, 1310 nm (62.5/125 μm, 500 MHz*km)
Min-TX Output-20 dBm
Max-TX Output-14 dBm
RX Sensitivity-34 dBm
• Physical Characteristics
Weight495 g (1.10 lb)
Dimensions132 x 150 x 42 mm (5.20 x 5.91 x 1.65 in)
• Environmental Limits
Operating Temperature-40 to 70°C (-40 to 158°F)
• Standards and Certifications
EMCEMC Level 4, ESD Level 4, criteria A
• Software Functions
IEEE 1588 or IP Teaming Selectable (Default =IP Teaming)Supports 4 modes
AFTAdapter Failover Teaming
SFTSwitch Fault Tolerance
ALBAdapter Failover and Load Balancing
Link Aggregationsupported
DA-IRIGB-4DIO-PCI104-EMC4 Hardware Specifications
• Hardware
Communication ControllerFPGA Cyclone V
Form FactorPCI/104
• Time Code Input
IRIG-BBased on the IRIG STANDARD 200-04 and IEEE 1344
• Precision and Accuracy
Accuracy (Time Synchronization)±1 µs
Accuracy (Free Running)±500 ms @ 24 hr
• Input Signals
Single Level• Open: High
• Short to GND:> Low
• Level Input: 5 to 12 V
Differential Level• D+ – D- > 0.2 V, RXD is High
• D+ – D- < -0.2 V, RXD is Low
• Level Input: 5 V
• Interface
IRIG-B2-pin wafer to DB9
DI/DO10-pin wafter to DB9
• Protection
ESD Protection8 kV contact, 15 kV Air ESD protection
Surge Protection2 kV line-to-line and 4 kV line-to-ground surge protection, 8/20 µs waveform
Insulation500 V
• Digital Input
Input Channels3, source type
Input Voltage0 to 30 VDC
Digital Input Levels for Dry Contacts• Logic level 0: Close to GND
• Logic level 1: Open
Digital Input Levels for Wet Contacts• Logic level 0: +3 V max.
• Logic level 1: +10 V to +30 V (source to DI)
Isolation3 kV optical isolation
Connector TypeDB9 male
• Digital Output
Output Channels4, sink type
Output CurrentMax. 200 mA per channel
On-state Voltage24 VDC nominal, open collector to 30 V
Isolation3 kV optical isolation
Connector TypeMale
• Operating Systems
WindowsWindows 7E
LinuxDebian 7
• Physical Characteristics
Dimensions90 x 96 mm (3.54 x 3.78 in)
• Environmental Limits
Operating Temperature-10 to 60°C (14 to 140°F)
Storage Temperature-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity5 to 95% (non-condensing)
AltitudeUp to 2000 m
• Standards and Certifications
EMCCE, FCC
EMIEN 55032, EN 61000-3-2, EN 61000-3-3, FCC Part 15 Subpart B Class A
EMSIEC 61000-4-2 ESD: Contact 8 kV; Air 15 kV
IEC 61000-4-3 RS: 10 V/m (80 MHz to 1 GHz)
IEC 61000-4-4 EFT: Signal 4 kV
IEC 61000-4-5 Surge: Signal 4 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8
Green ProductRoHS, CRoHS, WEEE
DA-SP08-DB, DA-SP08-I-DB, DA-SP08-I-TB Hardware Specifications
• Serial Interface
Serial Standards8 RS-232/422/485 ports, software selectable (DB9 male or terminal block connector)
ESD Protection15 kV for all signals
Isolation2 kV digital isolation (DA-SP08-I-DB and DA-SP08-I-TB only)
• Serial Communication Parameters
Data Bits5, 6, 7, 8
Stop Bits1, 1.5, 2
ParityNone, Even, Odd, Space, Mark
Flow ControlRTS/CTS, XON/XOFF, ADDC® (automatic data direction control) for RS-485
Baudrate50 bps to 921.6 kbps (supports non-standard baudrates; see user’s manual for details)
• Serial Signals
RS-232TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND
RS-422TxD+, TxD-, RxD+, RxD-, GND
RS-485-4wTxD+, TxD-, RxD+, RxD-, GND
RS-485-2wData+, Data-, GND
• Physical Characteristics
Weight290 g (0.64 lb)
Dimensions130 x 150 x 42 mm (5.12 x 5.91 x 1.65 in)
MTBF (mean time between failures)1,753,143 hrs
DA-SP08-I-EMC4-DB/TB Hardware Specifications
• Serial Interface
Serial Standards8 RS-232/422/485 ports, software selectable (DB9 male or terminal block connector)
ESD Protection8 kV contact, 15 kV air
Surge Protection2 kV line-to-line and 4 kV line-to-ground surge protection, 8/20 μs waveform
Insulation500 V
Isolation2 kV digital isolation
Pull low/high1k/150k, jumper selectable
Termination Resistor120 ohms, jumper selectable
• Serial Communication Parameters
Data Bits5, 6, 7, 8
Stop Bits1, 1.5, 2
ParityNone, Even, Odd, Space, Mark
Flow ControlRTS/CTS, XON/XOFF, ADDC® (automatic data direction control) for RS-485
Baudrate50 bps to 921.6 kbps (supports non-standard baudrates; see user’s manual for details)
• Serial Signals
RS-232TxD, RxD, RTS, CTS, GND
RS-422TxD+, TxD-, RxD+, RxD-, GND
RS-485-4wTxD+, TxD-, RxD+, RxD-, GND
RS-485-2wData+, Data-, GND
• Physical Characteristics
Weight500 g (1.11 lb)
Dimensions130 x 150 x 42 mm (5.12 x 5.91 x 1.65 in)
MTBF (mean time between failures)1,753,143 hrs
DA-SP38-I-TB Hardware Specifications
• Serial Interface
Serial Standards8 RS-422/485 ports, software selectable (DB9 male or terminal block connector)
ESD Protection15 kV for all signals
Isolation2 kV digital isolation
• Serial Communication Parameters
Data Bits5, 6, 7, 8
Stop Bits1, 1.5, 2
ParityNone, Even, Odd, Space, Mark
Flow ControlRTS/CTS, XON/XOFF, ADDC® (automatic data direction control) for RS-485
Baudrate50 bps to 921.6 kbps (supports non-standard baudrates; see user’s manual for details)
• Serial Signals
RS-422TxD+, TxD-, RxD+, RxD-, GND
RS-485-4wTxD+, TxD-, RxD+, RxD-, GND
RS-485-2wData+, Data-, GND
• Physical Characteristics
Weight245 g (0.54 lb)
Dimensions130 x 150 x 42 mm (5.12 x 5.91 x 1.65 in)

Available Models

Model No.Description
DA-IRIGB-4DIO-PCI104-EMC4Time synchronization expansion module, 1 IRIG-B signal input port, 3 digital inputs, 4 digital outputs
DA-SP08-I-DB8-port RS-232/422/485 serial module with DB9 connector and digital isolation
DA-SP08-DB8-port RS-232/422/485 serial module with DB9 connector
DA-SP08-I-TB8-port RS-232/422/485 serial module with terminal block connector and digital isolation
DA-SP38-I-TB8-port RS-422/485 serial module with terminal block connector and digital isolation
DA-SW08-RJ8-port 10/100 Mbps unmanaged switch module
DA-LN04-RJ4-port 10/100 Mbps LAN module
DA-UPCI-DKUniversal PCI development kit
DA-FX04-MM-ST-T4-port (100BaseFX) fiber LAN module with multi-mode, ST connector, supports IP Teaming
DA-SP08-I-EMC4-DB8-port RS-232/422/485 serial module with DB9 connector, digital isolation, and capable of withstanding EMS Level 4 environments
DA-SP08-I-EMC4-TB8-port RS-232/422/485 serial module with terminal block connector, digital isolation, and capable of withstanding EMS Level 4 environments

White Paper

Making Smart Substations Even Smarter: Enhancing Substation Reliability, Availability, and Maintainability

Smart Substation Computer White PaperThis paper sketches out a few of the more important concerns that electricity suppliers should account for when planning substation upgrades. The focus is on how best to increase the reliability, availability, and maintainability of power substation automation networks within the context of the IEC 61850 vision, to give electricity suppliers a clear idea of the design procedures, device tolerances, and hardware and software features they should expect from the engineers and manufacturers who design and build their networking and computing devices…….more


White Paper

Using MMS and SNMP to Integrate IT Management for Substation Automation

Using MMS and SNMP to Integrate IT Management for Substation AutomationThe devices that electrical substation automation systems are built from depend on highly precise, time-critical communications. Substation thus often use highly specialized monitoring systems to tackle this problem, but can approach it using different technologies. The most up-to-date, “smart” substations use the Manufacturing Messaging Specification (MMS) for communications among IEC 61850 intelligent electronic devices (IEDs), allowing SCADA to monitor and control IED states as well as process switchgear and transformer data directly. However, IT networking devices have been increasingly applied in IEC 61850 systems, and this equipment communicates using SNMP. Consequently, in the modern substation automation industry it’s clear that, for the time being, SNMP and MMS will continue to exist side-by-side. For designers and integrators of electrical substation equipment, bringing both MMS and SNMP support to IT equipment is an ideal, one-size fits-all alternative that allows for the greatest flexibility and adaptability around……..more


White Paper

Building the Industrial Cloud:The Immediate Future of M2M Technology

Building the Industrial Cloud:The Immediate Future of M2M TechnologyIn 2013, substantial steps towards building the Internet of Things at last began to materialize. In this white paper, Moxa examines the sorts of technology industrial networks will be relying on as they begin to build and deploy machine-to-machine networks. Software automations, hardware optimizations, and integrated platforms that fully exploit the convergence of these two main branches of system design are examined closely, to give IA and IT engineers a better idea of what challenges and obstacles they should be preparing for at the dawn of this new technological epoch……..more


Professional Design Service
 
 

Moxa’s customization service for industrial computing products is based on the Professional Design Service (PDS) concept, which aims to provide customers with tailor-made solutions. Industrial applications often have specific requirements, and specialized solutions are often needed. With more than 20 years of experience in the industrial networking and automation field, Moxa can offer professional, customized products and services that are ideal for your own industrial applications.

Customer Benefits
• Comprehensive consideration of platform system design gives optimal solutions, and guarantees that proposals address customer needs
• Our sophisticated customization procedures are built on meticulous production and quality control processes
•  A full-time technical support team gives customers quick and reliable solutions

backtotop