CP-116E-A
16-port RS-232/422/485 PCI Express board with 4 kV surge protection
PCI Express (Intelligent RS-485) Quick Installation Guide
DOS Driver for Multiport Serial Boards
Linux Driver for Multiport Serial Boards
SCO OpenServer 5 Driver for Multiport Serial Boards
SCO OpenServer 6 Driver for Multiport Serial Boards
Solaris 10 Driver for Multiport Serial Boards
- Mô tả Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
- Thông số Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
- Ordering Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
- Tài liệu Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
Features and Benefits 
- PCI Express x1 compliant
- Serial communication speed up to 921.6 kbps
- 128-byte FIFO and on-chip H/W, S/W flow control
- Variety of connection cables and boxes available for RS-232/422/485
- Drivers provided for the latest versions of Windows, Linux, and Unix
- Easy maintenance with on-board LED display and management software
- 15 kV ESD and 4 kV surge protection onboard
Overview
The CP-116E-A is a smart PCI Express multiport serial board designed for POS and ATM applications, and for use by industrial automation system manufacturers and system integrators. The CP-116E-A is compatible with all popular operating systems, and each of its 8 serial ports supports data rates of up to 921.6 kbps, and provides full modem control signals, ensuring compatibility with a wide range of serial peripherals. In addition, the CP-116E-A works with PCI Express x1, allowing the board to be installed in any PCI Express slot.
Intelligent RS-485 for Easy Installation and Troubleshooting (Patent Pending)
Setting up an RS-485 network is relatively straightforward. The challenge comes when the power is turned on and the devices connected to the network start transmitting and receiving data. In most cases, engineers will need to further tune the system by configuring pull high/low resistors and terminators at strategic points along the network. Moxa’s new Intelligent RS-485 technology supports two essential features to make it easy: (1) One-Click Installation automatically analyzes the network topology and then adjusts terminators and pull high/low resistors. (2) One-Click Troubleshooting tells you what to change to make a deficient network viable.
| • Hardware | |
| Comm. Controller | 16C550C compatible |
| Bus | PCI Express x1 |
| Connector | VHDCI 68 |
| • Serial Interface | |
| Number of Ports | 16 |
| Serial Standards | RS-232/422/485 |
| Max. No. of Boards per PC | 4 |
| • Serial Line Protection | |
| Surge Protection | 4 kV |
| • Performance | |
| Baudrate | 50 bps to 921.6 kbps |
| • Serial Communication Parameters | |
| Data Bits | 5, 6, 7, 8 |
| Stop Bits | 1, 1.5, 2 |
| Parity | None, Even, Odd, Space, Mark |
| Flow Control | RTS/CTS, XON/XOFF |
| • Serial Signals | |
| RS-232 | TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND |
| RS-422 | TxD+(B), TxD-(A), RxD+(B), RxD-(A), GND |
| RS-485-4w | TxD+(B), TxD-(A), RxD+(B), RxD-(A), GND |
| RS-485-2w | Data+(B), Data-(A), GND |
| • Physical Characteristics | |
| Dimensions | 97.9 x 88.9 mm (3.86 x 3.50 in) |
| • Driver Support | |
| Windows | Windows 2000/XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64) |
| Linux | Linux 2.4.x, 2.6.x, 3.x |
| Unix-like Systems | QNX 6, SCO OpenServer, UnixWare 7, Solaris 10 (x86/x64) |
| Note: Please refer to Moxa’s website for the latest driver support information. | |
| • Environmental Limits | |
| Operating Temperature | 0 to 55°C (32 to 131°F) |
| Storage Temperature | -20 to 85°C (-4 to 185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| • Standards and Certifications | |
| EMC | EN 55032/24 |
| EMI | CISPR 32, FCC Part 15B Class B |
| EMS | IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power: 1 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 4 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m IEC 61000-4-8 PFMF IEC 61000-4 |
| • MTBF (mean time between failures) | |
| Time | 310,993 hrs |
| Standard | Telcordia (Bellcore) TR/SR |
| • Power Requirements | |
| Input Current | 2,733 mA @ 3.3 VDC |
| • Warranty | |
| Warranty Period | 5 years |
| Details | See www.moxa.com/warranty |
Available Models
| Model No. | Description | |
|---|---|---|
| CP-116E-A | 16-port RS-232/422/485 PCI Express board with 4 kV surge protection |
Optional Accessories
| Model No. | Description | |
|---|---|---|
| OPT8-M9+ | VHDCI 68 to 8 x DB9(M) Connection Box | |
| OPT8A+ | VHDCI 68 to 8 x DB25(F) Connection Box | |
| OPT8S+ | VHDCI 68 to 8 x DB25(F) Connection Box w/ Surge Protection | |
| OPT8B+ | VHDCI 68 to 8 x DB25(M) Connection Boxs |
| Model No. | Description | |
|---|---|---|
| CBL-M68M25x8-100 (Opt8C+) | SCSI VHDCI 68 to 8 x DB25(M) Cable with 100cm | |
| CBL-M68M9x8-100 (Opt8D+) | SCSI VHDCI 68 to 8 x DB9(M) Cable with 100cm |
Dimensions (unit=mm)
.png)
More information on Intelligent RS-485 technology:
Download white paper for further information.
