Note: The Green Core Product Identity of the VPort series will be phased in starting Jan 1, 2015. During the product transition period, you may still receive products that use the previous panel design. Please click to learn more about Moxa’s Green Core product transition. here

Feature and Benefits 

  • Industrial design with -40 to 75°C operating temperature (heater or cooling fan not required)
  • 1/2.7” progressive scan CMOS camera with HD resolution (max. 1280 x 720)
  • DNR, WDR for superb image quality   
  • Triple video streams with H.264 and MJPEG
  • Compatible with C/CS-mount lenses with built-in ICR support
  • EN 50121-4 and NEMA TS2 compliant
  • DynaStream™ support for maximum network efficiency
  • Local storage capability with SD card slot
    Note: Lens must be purchased separately.

 

Introduction 

Rugged Design

The VPort 36-1MP series includes the world’s first rugged IP camera that can operate reliably in temperatures ranging from -40 to 75°C, without a heater or cooling fan.

Superb Video Quality

The VPort 36-1MP series is designed to be compatible with C/CS-mount lenses to meet any viewing angle and distance requirement. With a built-in, removable IR-cut filter and automatic color mode switching, the VPort 36-1MP series is suitable for either day or night use. Highly-tuned ROI (Regions of Interest), and WDR (Wide Dynamic Range) functions enable the VPort 36-1MP series to produce exceptionally clear images.

Convenient Installation

The VPort 36-1MP series includes unique and competitive cameras with features such as high EMI/surge protection, optional IP68 housing for rain/dust protection, and -40 to 75°C operation without a heater or cooling fan. The cameras are available with PoE (Power over Ethernet, 802.3af) or wire power input supporting 12/24 VDC or 24 VAC.

High Video Performance and Network Security

The VPort 36-1MP series can encode analog video into both H.264 and MJPEG video streams and can transmit up to 3 independent video streams (2 in H.264, and 1 in MJPEG) simultaneously. Advanced video encoding technology enables the cameras to support up to 30 FPS for each of the H.264 and MJPEG streams.
Patent Marking

• Camera
Sensor1/2.7” HD progressive scan CMOS
LensDesigned for C/CS-mount lens (lens not included)
Illumination (low light sensitvity)• Color: 0.2 lux at F1.2
• B/W: 0.05 lux at F1.2
Day & NightAuto/Color/BW; ICR Control
SynchronizationInternal
White BalanceATW/AWB
Electronic ShutterAuto, Fixed (1/30 to 1/25000 sec)
Dynamic Range• Color: 100 dB
• B/W: 110 dB
S/N Ratio50 dB (AGC OFF; DNR ON)
ICR ControlAuto (light sensor control) or DI control
DNRBuilt-in DNR (digital noise reduction)
WDRLevels 1-8
• color: 100 dB
• B/W: 110 dB
AGC (auto gain control)2X, 4X, 8X, 16X, 32X, 64X
IRISAuto, DC drive
Flickerless ControlIndoor/Outdoor mode
Auto ExposureLevel ±5
Image RotationFlip, Mirror, and 180° rotation
Image SettingManual tuning with saturation, sharpness, and contrast
Black Level ControlHigh/Medium/Low
• Video
Video CompressionH.264 (ISO/IEC 14496-10) or MJPEG
Video Outputvia Ethernet
Video Streams3, H.264, or MJPEG independent video streams
Video Resolution and FPS (frames per second)
Video Viewing• DynaStream™ support for changing the video frame rate automatically
• 3 privacy mask areas provided
• Adjustable image size and quality
• Timestamp and text overlay
• Maximum of 5 simultaneous unicast connections, 50 multicast clients
• CB
• Network
ProtocolsTCP, UDP, HTTP, SMTP, FTP, Telnet, NTP, DNS, DHCP, UPnP, RTP, RTSP, ICMP, IGMPv3, QoS, SNMPv1/v2c/v3, DDNS, Modbus/TCP, 802.1X, SSH/HTTPS
Ethernet1 10/100BaseT(X) Ethernet port, RJ45 connector
• Serial Port
PTZ Ports1, RS-485, terminal block connector
• Local Storage
SD SocketStandard SD socket (SDHC)
• GPIO
Digital Inputs1, max. 8 mAHigh: +13 to +30 V; Low: -30 to +3 V
Relay Outputs1, max. 24 VDC @ 1 A
• LED Indicators
STATIndicates if the system is booted properly or not
Network10 Mbps or 100 Mbps
PowerPower on/off
• Power Requirements
Input Voltage24 VDC (12 to 24 VDC) / 24 VAC, and PoE (802.3af) redundant power design
Input Current12 to 24 VDC, 0.8 A or 24 VAC, 7.5 W or 48 VDC (PoE), 0.135 A
• Physical Characteristics
HousingMetal, IP30 protection
Dimensions81.76 x 69.65 x 147.6 mm (3.22 x 2.74 x 5.81 in)
Weight770 g (1.69 lb)
InstallationWall mounting, pole mounting, corner mounting
Note: Optional external housing and mounting accessories may be required.
• Alarms
Intelligent VideoVPort 36-1MP: Camera tamper
VPort 36-1MP-IVA: Camera tamper, detection line/zone, missing object, abandoned object
Note: IVA functions are optional except for camera tamper.
Video Motion Detection3 independently configurable areas; includes sensitivity tuning
SchedulingDaily repeat timing schedule
ImagingJPEG snapshots for pre/trigger/post alarm images
Video RecordingEvent recordings stored on the SD card
Custom AlarmsHTTP event servers for setting customized alarm actions
Email/FTP MessagingAutomatic transfer of stored images via email or FTP as event-triggered actions
Pre-alarm Buffer24 MB video buffer for JPEG snapshot images
• Security
PasswordUser level password protection
FilteringBy IP address
Authentication802.1X
EncryptionHTTPS, SSH
• Environmental Limits
Operating TemperatureStandard Models: -25 to 60°C (-13 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity5 to 95% (non-condensing)
VibrationIEC 60068-2-6, 2 to 13.2 Hz: 2 mm (peak-peak); 13.2 to 100 Hz: 0.7g;
1.50 hrs/axis
IEC 60068-2-6, 3 to 9 Hz: 7 mm (peak-peak); 9 to 150 Hz: 1.0g;
1.86 hrs/axis
ShockIEC 60068-2-27, 20g/11ms
Altitude2000 m
• Standards and Certifications
SafetyUL 60950-1
Rail TrafficEN50121-4 
EMCEN 55032/24
EMICISPR 32, FCC Part 15B Class A
EMSIEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8
Hazardous LocationUL/cUL Class I Division 2 Groups A/B/C/D, ATEX Zone 2 Ex nCnAnL IIC T4
Note: The VP-3113MPIR lens is Class I Div. 2 and ATEX Zone 2 certified.
TransportationNEMA TS2
Note: Please check Moxa’s website for the most up-to-date certification status.
• MTBF (mean time between failures)
Time541,826 hours
StandardTelcordia SR332
• Warranty
Warranty Period5 years
DetailsSee www.moxa.com/warranty
• Minimum Viewing System Requirements
CPUPentium 4, 2.4 GHz
Memory512 MB of memory
OSWindows XP/2000 with SP4 or above, Windows Vista, Windows 7
BrowserInternet Explorer 9.x or above
MultimediaDirectX 9.0c or above
• Software Development
VPort SDK PLUSIncludes CGI commands, ActiveX Control, and API library for customized applications or system integration for third-party developers (latest version available on Moxa website).
StandardONVIF Profile S

unit: mm (inch)

Building Tougher IP Cameras for Tougher Environments

Moxa’s commitment to reliability and quality is built into all of our IP cameras, which are used for oil & gas, transportation, and railway waysides, as well as many other industrial applications that require rugged products for harsh environments. Watch this video to gain a better understanding of how we design and manufacture our IP cameras, which includes taking strict measures at each phase of product development, selecting the best raw material, and conducting a complete product inspection.

Download White Paper

What separates an industrial IP camera from the rest? Our white paper identifies why industrial-grade perform better than their conventional counterparts in the toughest applications.https://www.moxa.com/support/request_catalog_detail.aspx?id=1438

backtotop
vport-36-1mp-series-safenergy-i-din-moxa-ti-vit-nam