Đặc điểm và tính năng 

  • 10/100BaseT(X) auto-negotiation and auto-MDI/MDI-X
  • Link Fault Pass-Through (LFP)
  • Đồng hồ cảnh báo bằng đầu ra rơ le nếu nguồn điện gặp sự cố (LV model)
  • Dải nhiệt độ hoạt động rộng -40 đến 85°C
  • Đầu vào nguồn điện kép một chiều dự phòng (LV model)
  • Tích hợp bộ nguồn độ tin cậy cao loại bỏ sự cần thiết sử dụng máy biến áp bên ngoài
  • Tuân thủ EN 50121-4
  • Tuân thủ tất cả các mục kiểm tra bắt buộc tiêu chuẩn EN 50155
  • Sản phẩm này phù hợp với các ứng dụng đường sắt, được định nghĩa bằng tiêu chuẩn EN 50155.  

Giới thiệu 

Bộ chuyển đổi quang điện PTC-101 chuyển đổi từ 10/100BaseT(X) sang 100BaseFX. Dòng thiết bị này có sẵn cổng kết nối SC,ST hoặc LC. Bộ chuyển đổi PTC-101 loại bỏ sự cần thiết thêm dây và hỗ trợ các giao thức IEEE 802.3, IEEE 802.3u/x, full/half-duplex, MDI/MDI-X auto-sensing cung cấp giải pháp tổng thể cho mạng lưới Ethernet công nghiệp của bạn. Dòng PTC-101 tuân thủ các phần bắt buộc của tiêu chuẩn EN 50155, dải nhiệt độ hoạt động rộng, điện áp đầu vào nguồn điện, chống quá tải, EDS và chống rung.

• Technology
StandardsIEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X), 100BaseFX
• Interface
RJ45/M12 Ports10/100BaseT(X)
Fiber Ports100BaseFX (SC/ST/LC connectors)
LED IndicatorsPWR1, PWR2, Fiber Link, 10/100M (TP port)
DIP Switches
Alarm ContactOne relay output with current carrying capacity of 1 A @ 24 VDC (LV model only)
• Optical Fiber
• Physical Characteristics
HousingMetal, IP30 protection
Dimensions152.15 x 123.46 x 66.65 mm (5.99 x 4.86 x 2.62 in)
WeightProduct only: 690 g (1.52 lb)
Packaged: 875 g (1.92 lb)
• Environmental Limits
Operating Temperature-40 to 85°C (-40 to 185°F)
Storage Temperature-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity5 to 95% (non-condensing)
Conformal CoatingAvailable upon request
• Power Requirements
Input Voltage
Input CurrentLV-DC: 170 mA @ 20 VDC max.
HV-AC: 73 mA @ 85 VDC max.
HV-DC: 47 mA @ 88 VDC max.
ConnectionRemovable terminal block
Overload Current Protection1.6 A (protects against two signals shorted together)
Reverse Polarity ProtectionProtects against V+/V- reversal
• Standards and Certifications
SafetyUL 60950-1
EMCEN 55032/24
EMICISPR 32, FCC Part 15B Class A
EMSEN 61000-4-2 (ESD): Contact: 8 kV; Air: 15 kV
EN 61000-4-3 (RS): 80 MHz to 1 GHz: 3 V/m
EN 61000-4-4 (EFT): Power: 4 kV; Signal: 4 kV
EN 61000-4-5 (Surge): Power: 4 kV; Signal: 4 kV
EN 61000-4-6 (CS): 150 kHz to 80 MHz: 3 V/m
EN 61000-4-8 (PFMF)
EN 6
Green ProductRoHS, CRoHS, WEEE 
Note: Refer to the “Environmental Type Tests” table below for more detailed information.
FreefallIEC 60068-2-32
Power AutomationIEC 61850-3, IEEE 1613
Rail TrafficEN 50121-4 
*Please contact Moxa or a Moxa distributor for details.
VibrationIEC-61850-3, IEC-60870-2-2, EN 50125-3 (M12 models only)
• MTBF (mean time between failures)
Time1,211,613 hrs
StandardTelcordia (Bellcore), GB

Available Models

Model No.Description
PTC-101-M-LC-HVIndustrial 10/100BaseT(X) to 100BaseFX media converter, multi-mode with LC connector, 1 isolated power supply (88-300 VDC or 85-264 VAC), -40 to 85°C operating temperature
PTC-101-M-LC-LVIndustrial 10/100BaseT(X) to 100BaseFX media converter, multi-mode with LC connector, dual redundant power inputs (20-70 VDC), -40 to 85°C operating temperature
PTC-101-M-SC-HVIndustrial 10/100BaseT(X) to 100BaseFX media converter, multi-mode with SC connector, 1 isolated power supply (88-300 VDC or 85-264 VAC), -40 to 85°C operating temperature
PTC-101-M-SC-LVIndustrial 10/100BaseT(X) to 100BaseFX media converter, multi-mode with SC connector, dual redundant power inputs (20-70 VDC), -40 to 85°C operating temperature
PTC-101-M-ST-HVIndustrial 10/100BaseT(X) to 100BaseFX media converter, multi-mode with ST connector, 1 isolated power supply (88-300 VDC or 85-264 VAC), -40 to 85°C operating temperature
PTC-101-M-ST-LVIndustrial 10/100BaseT(X) to 100BaseFX media converter, multi-mode with ST connector, dual redundant power inputs (20-70 VDC), -40 to 85°C operating temperature
PTC-101-S-LC-HVIndustrial 10/100BaseT(X) to 100BaseFX media converter, single-mode with L connector, 1 isolated power supply (88-300 VDC or 85-264 VAC), -40 to 85°C operating temperature
PTC-101-S-LC-LVIndustrial 10/100BaseT(X) to 100BaseFX media converter, single-mode with LC connector, dual redundant power inputs (20-70 VDC), -40 to 85°C operating temperature
PTC-101-S-SC-HVIndustrial 10/100BaseT(X) to 100BaseFX media converter, single-mode with SC connector, 1 isolated power supply (88-300 VDC or 85-264 VAC), -40 to 85°C operating temperature
PTC-101-S-SC-LVIndustrial 10/100BaseT(X) to 100BaseFX media converter, single-mode with SC connector, dual redundant power inputs (20-70 VDC), -40 to 85°C operating temperature
PTC-101-S-ST-HVIndustrial 10/100BaseT(X) to 100BaseFX media converter, single-mode with ST connector, 1 isolated power supply (88-300 VDC or 85-264 VAC), -40 to 85°C operating temperature
PTC-101-S-ST-LVIndustrial 10/100BaseT(X) to 100BaseFX media converter, single-mode with ST connector, dual redundant power inputs (20-70 VDC), -40 to 85°C operating temperature

Optional Accessories

Other Accessories

Model No.Description
WK-51Wall mounting kit

2015 Railway Application Guide

Moxa has provided key communications, data control, and computing infrastructure for dozens of successful major railway projects around the world. Metro, mainline, high speed rail, and conventional rolling stock applications on six continents. This brochure examines some key application scenarios and how Moxa addresses today’s industrial challenges.

This brochure covers the following applications:

  • Ethernet Train Backbone
  • Onboard CCTV
  • Passenger Wi-Fi
  • Passenger Information System
  • Communication-based Train Control (CBTC)
  • Wayside Communication System
  • Condition Monitoring for Turnouts

backtotop
b-chuyn-i-quang-in-iec-61850-3-ptc-101-moxa-vit-nam