MiiNePort E2 Series
10/100 Mbps embedded serial device servers
- Mô tả Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
- Thông số Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
- Ordering Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
- Tài liệu Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
* MiiNePort E2 embedded module has received Taiwan Excellence awards.
Features and Benefits .jpg)
- Smallest embedded device server available—only 29 x 17 x 12.6 mm
- EZPower for 3.3 to 5 VDC system power input supported
- Extremely low power consumption
- Uses the MiiNe, Moxa’s second generation SoC
- Simple integration with NetEZ technology
- Operation versatility with Real COM/TCP/UDP/RFC2217/MCSC
Overview
Moxa’s MiiNePort E2 series embedded device servers are designed for manufacturers who wanting add sophisticated network connectivity to their serial devices with minimal integration effort. The MiiNePort E2 is empowered by the MiiNe, Moxa’s second generation SoC, which supports 10/100 Mbps Ethernet, delivers a serial baudrate of up to 921.6 kbps, offers a versatile selection of ready-to-use operation modes, and requires a minimal amount of power. With Moxa’s innovative NetEZ technology, the MiiNePort E2 can convert any device with a standard serial interface to an Ethernet-enabled device. In addition, the MiiNePort E2 is the smallest embedded device server without an RJ45 connector, making it easy to fit into virtually any existing serial device.
The MiiNe—Moxa’s 2nd Generation SoC.png)
The MiiNe was created to provide manufacturers with a competitive embedded serial-to-Ethernet solution. The MiiNePort E2, which uses the MiiNe for its SoC, is one of the world’s tiniest embedded device servers, and has the lowest power consumption of similar products. The MiiNe’s features include:
• Cost-effective serial-to-Ethernet conversions
• ARM core
• Advanced UART technology
• Internal 2 MB Flash and 4 MB SDRAM memory
| • Form Factor | |
| Type | Drop-in module |
| Dimensions | 29 x 17 x 12.6 mm (1.14 x 0.67 x 0.50 in) |
| Weight | 5 g (0.01 lb) |
| • System Information | |
| CPU | 32-bit ARM Core |
| RAM | 4 MB built in |
| Flash | 2 MB built in |
| • Ethernet Interface | |
| Number of Ports | 1 |
| Speed | 10/100 Mbps, auto MDI/MDIX |
| Magnetic Isolation Protection | 1.5 kV built-in |
| • Serial Interface | |
| Number of Ports | 1 |
| Transmission Format | Standard TTL |
| • Serial Communication Parameters | |
| Data Bits | 5, 6, 7, 8 |
| Stop Bits | 1, 1.5, 2 |
| Parity | None, Even, Odd, Space, Mark |
| Flow Control | RTS/CTS, DTR/DSR, XON/XOFF |
| Baudrate | MiiNePort E2: 50 bps to 230.4 kbps MiiNePort E2-H: 50 bps to 921.6 kbps |
| Note | Non-standard baudrates supported |
| • Serial Signals | |
| TTL | TxD, RxD, RTS, CTS, DTR, DSR, DCD, RST (reset circuit), GND |
| • Digital I/O Pins | |
| GPIO | 4 configurable I/O pins |
| • Software | |
| Network Protocols | ICMP, ARP, IPv4, TCP, UDP, DHCP, HTTP, SNMP V1, SMTP, TFTP, Auto IP, Telnet, BOOTP |
| Configuration Options | Web Console, Serial Console (Serial Command Mode), Telnet Console, Windows Utility |
| Windows Real COM Drivers | Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded |
| Fixed TTY Drivers | SCO Unix, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X |
| Linux Real TTY Drivers | Linux 2.4.x, 2.6.x, 3.x |
| Operation Modes | Real COM, TCP Server, TCP Client, UDP, Ethernet Modem, RFC2217, MCSC |
| NetEZ Function | EZPower, EZPage, SCM (Serial Command Mode), AutoCFG, MCSC (Multi-channel Serial Communication) |
| • Environmental Limits | |
| Operating Temperature | Standard Models: 0 to 55°C (32 to 131°F) Wide Temp. Models: -40 to 85°C (-40 to 185°F) |
| Storage Temperature (package included) | -40 to 60°C (-40 to 140°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| • Power Requirements | |
| Input Voltage | 3.3 to 5 VDC |
| Input Current | 157 mA @ 3.3 VDC |
| • Standards and Certifications | |
| EMC | EN 55032/24 |
| EMI | CISPR 32, FCC Part 15B Class B |
| EMS | IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power 1 kV; Signal 0.5 kV IEC 61000-4-5 Surge: Power 2 kV; Signal: 0.5 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m IEC 61000-4-8 P |
| Vibration | IEC 60068-2-6, 5-25.7 Hz: ±15 mm; 25.7-500 Hz: 20g; 3 hours/axis |
| Shock | IEC 60068-2-27, 500g/2ms |
| Drop | IEC 60068-2-34, IEC 60068-2-32, ISTA-2A |
| Note | Standards testing is done with the MiiNePort E2-ST or MiiNePort E2-H-ST starter kits. |
| • Reliability | |
| MTBF (mean time between failures) | Time: 5,696,350 hrs Standard: Telcordia (Bellcore) SR-332 |
| • Warranty | |
| Warranty Period | 5 years |
| Details | See www.moxa.com/warranty |
Available Models
| Model No. | Description | |
|---|---|---|
| MiiNePort E2 | Embedded device server for TTL devices, drop-in module, 10/100M without RJ45 connector, 50 bps to 230.4 Kbps baudrate, 0 to 55°C operating temperature | |
| MiiNePort E2-H | Embedded device server for TTL devices, drop-in module, 10/100M without RJ45 connector, 50 bps to 921.6 Kbps baudrate, 0 to 55°C operating temperature | |
| MiiNePort E2-T | Embedded device server for TTL devices, drop-in module, 10/100M without RJ45 connector, 50 bps to 230.4 Kbps baudrate, -40 to 85°C operating temperature | |
| MiiNePort E2-H-T | Embedded device server for TTL devices, drop-in module, 10/100M without RJ45 connector, 50 bps to 921.6 Kbps baudrate, -40 to 85°C operating temperature | |
| MiiNePort E2-ST | Starter kit for the MiiNePort E2 Series, module included | |
| MiiNePort E2-H-ST | Starter kit for the MiiNePort E2-H Series, module included |
Dimensions
Pin Assignment
