ioLogik E1261W-T
Ethernet remote I/O for wind power applications
- Mô tả Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
- Thông số Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
- Ordering Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
- Tài liệu Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
.jpg)
Đặc điểm và tính năng
- Địa chỉ Slave Modbus/TCP xác định người dùng
- Giao tiếp tích cực với MX-AOPC UA Server
- Dễ dàng triển khai và cấu hình hàng loạt với tiện ích ioSearch
- Cấu hình thân thiện thông qua trình duyệt web
- Đơn giản hóa trình quản lý I/O với thư viện MXIO trên cả nền tảng Linux và Window
- Nhiệt độ hoạt động rộng -40 đến 75°C
Giới thiệu
ioLogik E1216W-T được thiết kế cho các hệ thống giám sát điều kiện từ xa dựa trên Ethernet. Với 3 kênh RTD, 5 kênh AI, 12 kênh DIO, kết hợp I/O của ioLogik E1261W-T là lý tưởng để giám sát các tuabin gió và các điều kiện môi trường. Không như các sản phẩm remote I/O khác thụ động và phải thăm dò dữ liệu, ioLogik E1261W-T hỗ trợ giao tiếp chủ động với Active OPC Server đã được cấp bằng sáng chế để kết nối liên tục với các hệ thống SCADA trong thời gian thực. Cách tiếp cận báo cáo theo từng ngoại lệ này là rất mới để giám sát dựa trên PC, yêu cầu băng thông ít hơn các phương pháp thăm dò truyền thống.
| • LAN | |
| Ethernet | 1 10/100 Mbps RJ45 port |
| Protection | 1.5 kV magnetic isolation |
| Protocols | Modbus/TCP (slave), TCP/IP, UDP, DHCP, BOOTP, HTTP |
| • Serial | |
| Interface | 1 RS-485-2w terminal block port |
| Parity | None |
| Data Bits | 8 |
| Stop Bits | 1 |
| Flow Control | None |
| Baudrate | 1200 to 115200 bps |
| Protocols | Modbus RTU (slave) |
| • Inputs and Outputs | |
| Configurable DIOs (by software) | 12 channels |
| Analog Inputs | 5 channels |
| RTDs | 3 channels |
| Isolation | 3k VDC or 2k Vrms |
| • Digital Input | |
| Sensor Type | Wet Contact (NPN or PNP), Dry Contact |
| I/O Mode | DI or Event Counter |
| Dry Contact | • On: short to GND • Off: open |
| Wet Contact (DI to GND) | • On: 0 to 3 VDC • Off: 10 to 30 VDC |
| Common Type | 12 points per COM |
| Counter Frequency | 250 Hz |
| Digital Filtering Time Interval | Software Configurable |
| • Digital Output | |
| Type | Sink |
| I/O Mode | DO or Pulse Output |
| Pulse Output Frequency | 500 Hz |
| Over-Voltage Protection | 45 VDC |
| Over-Current Protection | 2.6 A (4 channels @ 650 mA) |
| Over-Temperature Shutdown | 175°C (typical), 150°C (min.) |
| Current Rating | 200 mA per channe |
| • Analog Input | |
| Type | Differential input |
| Resolution | 16 bits |
| I/O Mode | Voltage / Current (software selectable) |
| Input Range | 0 to 10 VDC, 0 to 20 mA, 4 to 20 mA, 4 to 20 mA (burnout detection) |
| Accuracy | • ±0.1% FSR @ 25°C • ±1.0% FSR @ -40 and 75°C |
| Sampling Rate | • All channels: 12 samples/sec • Per channel: 2.4 samples/sec |
| Input Impedance | 10 mega-ohms (min.) |
| Built-in Resistor for Current Input | 120 ohms |
| • RTD | |
| Sensor Type | PT100 (-200 to 850°C) |
| Input connection | 2- or 3-wire |
| Sampling Rate | • All channels: 12 samples/sec • Per channel: 4 samples/sec |
| Resolution | 16 bits |
| Accuracy | • ±0.1% FSR @ 25°C • ±1.0% FSR @ -40 and 75°C |
| Input Impedance | 625 kilo-ohms (min.) |
| • Power Requirements | |
| Input Voltage | 12 to 36 VDC |
| Input Current | 143 mA @ 24 VDC |
| • Physical Characteristics | |
| Wiring | I/O cable, 14 AWG (max.) |
| Dimensions | 115 x 79 x 40.4 mm (4.53 x 3.11 x 1.59 in) |
| Weight | Under 250 g (0.55 lb) |
| Mounting | DIN-rail or wall |
| • Environmental Limits | |
| Operating Temperature | -40 to 75°C (-40 to 167°F) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| Shock | IEC 60068-2-27 |
| Vibration | IEC 60068-2-6 |
| Altitude | Up to 2000 m Please contact Moxa if you require products guaranteed to function properly at higher altitudes. |
| • Standards and Certifications | |
| Safety | UL 508 |
| EMC | EN 55032/24 |
| EMI | CISPR 32, FCC Part 15B Class A |
| EMS | IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8 |
| Green Product | RoHS, CRoHS, WEEE Please check Moxa’s website for the most up-to-date certification status. |
| • MTBF (mean time between failures) | |
| Time | 367,508 hrs |
| Standard | Telcordia SR332 |
| • Warranty | |
| Warranty Period | 5 years |
| Details | See www.moxa.com/warranty |
Available Models
| Model No. | Description | |
|---|---|---|
| ioLogik E1261W-T | Ethernet remote I/O with 12 DIOs, 5 AIs, 3 RTDs, -40 to 75°C operating temperature |
Towards a Smarter World with Moxa’s I/O Solutions
Smart I/O Success Stories
The innovation of Moxa’s data acquisition engineers is reflected in Moxa’s latest I/O products, which are helping companies around the world simplify the management of distributed control systems, and as a result reduce costs and create business growth. In addition, Moxa also provides innovative data acquisition software that helps businesses simplify the process of integrating I/O devices with an existing network. This smart automation software not only helps users gather data faster and more efficiently, but also helps businesses identify, assess, and monitor potential risks.
Download this 16-page Smart I/O Brochure to learn more about:
– The Smarter World Trend 
– Moxa’s Innovative Designs
– Moxa’s Easy-to-Use Automation Software
– Success Stories Based on Moxa’s Smart I/O Solutions
– Moxa’s Smart IO Product Selection Guide
Related White Papers
.jpg)
A New Chapter in the Legacy of RS-485 Data Acquisition Devices
This white paper provides insight into the future of RS-485 data acquisition devices, and how Moxa is adding a new chapter to the legacy of RS-485 data acquisition devices.
.jpg)
SNMP I/O Devices Make Monitoring Environmental Conditions Easy
This paper will first explain what SNMP is, why you should use SNMP for environmental monitoring, and then discuss how an SNMP environmental monitoring device will help ease the management and implementation process.
Hardware Informations:
Dimensions (unit = mm)
