IMC-21 Series

Entry-level industrial 10/100BaseT(X) to 100BaseFX media converters

Danh mục: Từ khóa: , , , , , , ,
bo-chuyen-doi-quang-dien

Datasheet

Manual

Đặc điểm và tính năng 

  • Multi-mode hoặc single-mode với kết nối cổng quang SC hoặc ST
  • Link Fault Pass-Through (LFP)
  • DIP switch để chọn FDX/HDX/10/100/Auto/Force

Giới thiệu

Bộ chuyển đổi quang điện công nghiệp IMC-21 chuyển đổi tốc độ 10/100BaseT(X) sang 100BaseFX, nó được thiết kế mang lại hoạt động ổn định và đáng tin cậy trong các môi trường công nghiệp khắc nghiệt. Bộ chuyển đổi này là giải pháp với mức chi phí hợp lý, chạy ở dải điện áp đầu vào là 12 đến 48 VDC và với dải nhiệt độ hoạt động là -10 đến 60°C. Thiết kế khung chắc chắn đảm bảo các thiết bị Ethernet có thể đáp ứng các điều kiện công nghiệp. Bộ chuyển đổi IMC-21 dễ dàng gắn trên một DIN-rail hoặc vào một hộp phân phối.

• Technology
StandardsIEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3x for Flow Control
• Interface
RJ45 Ports10/100BaseT(X)
Fiber Ports100BaseFX (SC/ST connectors)
LED IndicatorsPower, 10/100M (TP port), 100M (fiber port), FDX/COL (fiber port)
DIP SwitchesTP port’s 10/100M, Half/Full modes, and Force/Auto modes, fiber connection’s Full/Half mode, Link Fault Pass-Through (LFP)
• Optical Fiber
• Physical Characteristics
HousingPlastic, IP30 protection
Dimensions25 x 109 x 97 mm (0.98 x 4.29 x 3.82 in)
Weight125 g (0.27 lb)
InstallationDIN-rail mounting
• Environmental Limits
Operating Temperature-10 to 60°C (14 to 140°F)
Storage Temperature-40 to 70°C (-40 to 158°F)
Ambient Relative Humidity5 to 95% (non-condensing)
• Power Requirements
Input Voltage12 to 48 VDC
Rated Voltage300 mA @ 48 VDC max.
ConnectionRemovable 3-contact terminal block
Overload Current Protection1.1 A
Reverse Polarity ProtectionPresent
• Standards and Certifications
SafetyUL 508
EMCEN 55032/24
EMICISPR 32, FCC Part 15B Class A
EMSEN 61000-4-2 (ESD): Contact: 6 kV; Air: 8 kV
EN 61000-4-3 (RS): 80 MHz to 1 GHz: 1 V/m
EN 61000-4-4 (EFT): Power: 1 kV; Signal: 1 kV
EN 61000-4-5 (Surge): Power: 1 kV; Signal: 1 kV
EN 61000-4-6 (CS): 150 kHz to 80 MHz: 3 V/m
EN 61000-4-8 (PFMF)
EN 61000-4-11
Green ProductRoHS, CRoHS, WEEE
ShockIEC 60068-2-27
FreefallIEC 60068-2-32
VibrationIEC 60068-2-6
• MTBF (mean time between failures)
Time353,000 hrs
StandardMIL-HDBK-217F

Available Models

Model No.Description
IMC-21-M-SCIndustrial 10/100BaseT(X) to 100BaseFX media converter, multi mode, SC connector
IMC-21-M-STIndustrial 10/100BaseT(X) to 100BaseFX media converter, multi mode, ST connector
IMC-21-S-SCIndustrial 10/100BaseT(X) to 100BaseFX media converter, single mode, SC connector

Optional Accessories

Mounting Kits

Model No.Description
RK-4U4U-high 19″ rack mounting kit

Using Fiber Media Converters with Copper Networks

The 21st century has seen a huge increase in using Ethernet for industrial automation applications such as remote monitoring. However, the advantages and versatility obtained from using Ethernet for industrial automation applications are offset by a number of drawbacks, one of which is signal interference. As a general rule, shop floor and substation environments are not nearly as friendly as what you would find in an air conditioned office, and for this reason, engineers are now using Fiber Ethernet to extend transmission distance and protect data from the effects of EMI (electromagnetic interference), or even Gigabit Ethernet to provide increased bandwidth. In addition, advanced redundancy solutions, such as STP/RSTP and Moxa’s own Turbo Ring protocol, provide the redundancy needed when implementing Ethernet with automation applications.

In this paper we cover the following topics:

  • Using Media Converters as Part of a Network
  • Going Beyond Media Conversion—LFP and FEF
  • Important Reminder: Use Media Converters in Pairs
  • What to Expect from Redundancy

Tiếng Việt
backtotop
b-chuyn-i-quang-in-10-100baset-x-sang-100basefx-imc-21