Đặc điểm và tính năng 

  • Hỗ trợ cổng điện tốc độ 10/100/1000BaseT(X) và cổng quang tốc độ 1000BaseSFP
  • Link Fault Pass-through (LFP)
  • Cảnh báo ngắt cổng bằng đầu ra rơ le khi nguồn điện gặp sự cố
  • Đầu vào nguồn điện dự phòng
  • Dải nhiệt độ hoạt động rộng -40 đến 75°C
  • Thiết kế hoạt động hiệu quả ở các địa hình gồ ghề (Class 1 Div. 2/Zone 2, IECEx)

Giới thiệu.

Bộ chuyển đổi quang điện module gigabit IMC-101G được thiết kế cung cấp chuyển đổi truyền thông bền và đáng tin cậy từ 10/100/1000BaseT(X) sang 1000BaseSX/LX/LHX/ZX hoạt động trong các môi trường công nghiệp khắc nghiệt. Thiết kế công nghiệp của dòng IMC-101G giúp cho các ứng dụng tự động hóa công nghiệp hoạt động liên tục, mỗi thiết bị được trang bị sẵn đồng hồ cảnh báo đầu ra rơ le ngăn chặn rủi ro và sự cố mất kết nối. Tất cả các model IMC-101G đều hoàn thành 100% kiểm tra cháy nổ và có sẵn dải nhiệt độ hoạt động tiêu chuẩn từ 0 đến 60°C, thậm chí 1 số model có thể kéo dài dải nhiệt độ hoạt động từ -40 đến 75°C.

• Technology
StandardsIEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3z for 1000BaseSX/LSX/LX/LH/LHX/ZX/E2X
• Interface
RJ45 Ports10/100/1000BaseT(X)
Fiber Ports1000BaseSFP slot
LED IndicatorsPWR1, PWR2, FAULT, 10/100M (TP port), 1000M (TP and Fiber port)
DIP SwitchesPort break alarm mask, Link Fault Pass-through, SFP Auto/Force
Alarm ContactOne relay output with current carrying capacity of 1 A @ 24 VDC
• Physical Characteristics
HousingMetal, IP30 protection
Dimensions53.6 x 135 x 105 mm (2.11 x 5.32 x 4.13 in)
Weight630 g (1.39 lb)
InstallationDIN-rail mounting, wall mounting (with optional kit)
• Environmental Limits
Operating TemperatureStandard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity5 to 95% (non-condensing)
• Power Requirements
Input Voltage12 to 45 VDC redundant inputs
Input Current220 mA @ 45 VDC max.
ConnectionRemovable terminal block
Overload Current Protection2.5 A
Reverse Polarity ProtectionPresent
• Standards and Certifications
SafetyUL 508
Hazardous LocationUL/cUL Class I Division 2 Groups A/B/C/D, ATEX Zone 2 Ex nC nL IIC T4, IECEx
EMCEN 55032/24
EMICISPR 32, FCC Part 15B Class A
EMSEN 61000-4-2 (ESD): Contact: 6 kV; Air: 8 kV
EN 61000-4-3 (RS): 80 MHz to 1 GHz: 3 V/m
EN 61000-4-4 (EFT): Power: 2 kV; Signal: 2 kV
EN 61000-4-5 (Surge): Power: 1 kV; Signal: 1 kV
EN 61000-4-6 (CS): 150 kHz to 80 MHz: 3 V/m
EN 61000-4-8 (PFMF)
EN 610
Green ProductRoHS, CRoHS, WEEE
ShockIEC 60068-2-27
FreefallIEC 60068-2-32
VibrationIEC 60068-2-6
• MTBF (mean time between failures)
Time500,540 hrs
StandardTelcordia (Bellcore), GB

Available Models

Model No.Description
IMC-101GIndustrial 10/100/1000BaseT(X) to 1000BaseSX/LX/LHX/ZX media converter, 0 to 60°C
IMC-101G-TIndustrial 10/100/1000BaseT(X) to 1000BaseSX/LX/LHX/ZX media converter, -40 to 75°C
IMC-101G-IEXIndustrial 10/100/1000BaseT(X) to 1000BaseSFP media converter, IECEx, 0 to 60°C operating temperature
IMC-101G-T-IEXIndustrial 10/100/1000BaseT(X) to 1000BaseSFP media converter, IECEx, -40 to 75°C operating temperature

Compatible Modules

SFP-1G Series

Model No.Description
SFP-1GSXLCSFP module with 1 1000BaseSX port with LC connector for 0.5 km transmission, 0 to 60°C operating temperature
SFP-1GSXLC-TSFP module with 1 1000BaseSX port with LC connector for 0.5 km transmission, -20 to 75°C operating temperature
SFP-1GLXLCSFP module with 1 1000BaseLX port with LC connector for 10 km transmission, 0 to 60°C operating temperature
SFP-1GLXLC-TSFP module with 1 1000BaseLX port with LC connector for 10 km transmission, -40 to 85°C operating temperature
SFP-1GLHXLCSFP module with 1 1000BaseLHX port with LC connector for 40 km transmission, 0 to 60°C operating temperature
SFP-1GLHXLC-TSFP module with 1 1000BaseLHX port with LC connector for 40 km transmission, -40 to 85°C operating temperature
SFP-1GZXLCSFP module with 1 1000BaseZX port with LC connector for 80 km transmission, 0 to 60°C operating temperature
SFP-1GZXLC-TSFP module with 1 1000BaseZX port with LC connector for 80 km transmission, -40 to 85°C operating temperature

Optional Accessories

DIN Rail Power Supplies

Model No.Description
DR-452445W/2A DIN-rail 24 VDC power supply with universal 85 to 264 VAC or 120-370 VDC input, -10 to 50°C operating temperature
DR-75-2475W/3.2A DIN-rail 24 VDC power supply with universal 85 to 264 VAC or 120-370 VDC input, -10 to 60°C operating temperature
DR-120-24120W/5A DIN-rail 24 VDC power supply with universal 88 to 132 VAC or 176 to 264 VAC input by switch, or 248-370 VDC , -10 to 60°C operating temperature

Mounting Kits

Model No.Description
WK-46Wall Mounting Kit
RK-4U4U-high 19″ rack mounting kit

Using Fiber Media Converters with Copper Networks

The 21st century has seen a huge increase in using Ethernet for industrial automation applications such as remote monitoring. However, the advantages and versatility obtained from using Ethernet for industrial automation applications are offset by a number of drawbacks, one of which is signal interference. As a general rule, shop floor and substation environments are not nearly as friendly as what you would find in an air conditioned office, and for this reason, engineers are now using Fiber Ethernet to extend transmission distance and protect data from the effects of EMI (electromagnetic interference), or even Gigabit Ethernet to provide increased bandwidth. In addition, advanced redundancy solutions, such as STP/RSTP and Moxa’s own Turbo Ring protocol, provide the redundancy needed when implementing Ethernet with automation applications.

In this paper we cover the following topics:

  • Using Media Converters as Part of a Network
  • Going Beyond Media Conversion—LFP and FEF
  • Important Reminder: Use Media Converters in Pairs
  • What to Expect from Redundancy

backtotop
b-chuyn-i-quang-in-module-gigabit-imc-101g-moxa-vit-nam