- Mô tả Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
- Thông số Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
- Ordering Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
- Tài liệu Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
Features and Benefits
- Automatic CO/CPE negotiation reduces configuration time
- Turbo mode connection, up to 15.3 Mbps over twisted-pair copper wires
- Link Fault Pass-through (LFP) support and interoperable with Turbo Ring and Turbo Chain
- Link quality indicators for simple troubleshooting
- Easy network management by web browser, Telnet/serial console, Windows utility, ABC-01, and MXview
Introduction
The IEX-402 series is an industrial managed Ethernet extender designed with one 10/100BaseT(X) and one DSL port. The Ethernet extender provides a point-to-point extension over twisted copper wires based on G.SHDSL.bis and VDSL2 standards. The IEX-402-SHDSL supports data rates of up to 15.3 Mbps with a long transmission distance of up to 8 km, while the IEX-402-VDSL2 provides data rates of up to 100 Mbps with transmission distance of up to 3 km.
The IEX-402 series is designed for use in harsh operating environments. The DIN-rail mount, wide operating temperature range (-40 to 75°C), and dual power input make it ideal for installation in industrial applications.
To simplify configuration, the IEX-402 series uses CO/CPE auto negotiation. By factory default, the device will automatically assign CPE status to one of each pair of IEX devices. In addition, Link Fault Pass-through (LFP) and network redundancy interoperability enhance the reliability and accessibility of communication networks. Advanced managed and monitored functionality through MXview, including a virtual panel, improve the user experience for quick trouble shooting.
| • Technology | |
| Standards | IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) IEEE 802.3x for Flow Control IEEE 802.1p for Class of Service ITU-T G.991.2 for Single-pair high-speed digital subscriber line (G.SHDSL) transceivers |
| Protocols | SNMPv1/v2c/v3, DHCP Client, TFTP, SNTP, HTTP, Telnet, Syslog, LLDP, Modbus/TCP |
| MIB | MIB-II |
| Flow Control | IEEE 802.3x flow control, back pressure flow control |
| • Interface | |
| DSL Port | RJ-11 (RJ45 connector) or detachable 2-contact terminal block |
| RJ45 Ports | 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection |
| Console Port | RS-232 (RJ45 connector) |
| LED Indicators | PWR1, PWR2, FAULT, STATE, LINK/ACT, CO/CPE, 10/100 (TP port) |
| DIP Switches | CO/CPE, SNR/SPEED, ANNEX B/ANNEX A, STD/TURBO |
| Button | Reset button |
| • Switch Properties | |
| MAC Table Size | 1K |
| Packet Buffer Size | 512K |
| • Physical Characteristics | |
| Housing | Metal, IP30 protection |
| Dimensions | 35 x 130 x 105 mm (1.38 x 5.12 x 4.13 in) |
| Weight | 290 g (0.64 lb) |
| Installation | DIN-rail mounting, wall mounting (with optional kit) |
| Altitude | Up to 2000 m |
| Note: Contact Moxa for products guaranteed to function at higher altitudes. | |
| • Environmental Limits | |
| Operating Temperature | Standard Models: -10 to 60°C (14 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| • Power Requirements | |
| Rated Voltage | 12/24/48 VDC (9.6 to 60 VDC), redundant dual inputs |
| Connection | 2 removable 2-contact terminal block |
| Overload Current Protection | Present |
| Reverse Polarity Protection | Present |
| • Standards and Certifications | |
| Safety | UL 508 |
| EMC | EN 55032/24 |
| EMI | CISPR 32, FCC Part 15B Class A |
| EMS | EN 61000-4-2 (ESD): Contact: 6 kV; Air: 8 KV EN 61000-4-3 (RS): 80 MHz to 1 GHz: 10 V/m EN 61000-4-4 (EFT): Power: 2 kV EN 61000-4-5 (Surge): Power: 2 kV EN 61000-4-6 (CS) 150 kHz to 80 MHz: 10 V/m EN 61000-4-8 (PFMF) |
| Shock | IEC 60068-2-27 |
| Freefall | IEC 60068-2-32 |
| Rail Traffic | EN 50121-4 |
| Vibration | IEC 60068-2-6 |
| • MTBF (mean time between failures) | |
| Time | 1,310,000 hrs |
| Standard | Telcordia (Bellcore), GB |
Available Models
| Model No. | Description |
|---|---|
| IEX-402-SHDSL | Managed SHDSL Ethernet extender with 1 10/100BaseT(x) port and 1 DSL port, -10 to 60 °C operating temperature |
| IEX-402-SHDSL-T | Managed SHDSL Ethernet extender with 1 10/100BaseT(x) port and 1 DSL port, -40 to 75 °C operating temperature |
Optional Accessories
Trial Software| Model No. | Description |
|---|---|
| MXconfig | Industrial network configuration tool |
Take Today, Add Tomorrow – Worldwide References of the IEX Series Industrial Ethernet Extenders
As an alternative to investing in new cables for system upgrades, Moxa’s IEX Ethernet extenders provide users with greater flexibility for linking devices together over long distances using existing copper wiring. When costs need to be reduced, users can easily take the legacy system, and transform it into a modern network, while saving time and money. Read on to learn more details about worldwide user cases….
FAQ: Is Your Network Infrastructure Ready for the IIoT?
The Industrial Internet of Things (IIoT) trend aims to improve efficiency and productivity by connecting different devices together as well as collecting and analyzing large volumes of data to offer accurate information. However, before reaping the benefits of the IIoT, users need to ensure that the correct infrastructure is in place. To make sure your network is ready for the IIoT, check out five of the most frequently mentioned questions.
