AWK-3131A Series
Industrial IEEE 802.11a/b/g/n wireless AP/bridge/client
- Mô tả Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
- Thông số Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
- Ordering Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
- Tài liệu Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
Tính năng và lợi ích
- Hỗ trợ AP/bridge/client chuẩn IEEE 802.11a/b/g/n
- Chuyển vùng liền mạch với Turbo Roaming
- Hoàn thành dự phòng với bảo vệ AeroLink
- Tích hợp ăng ten và cách ly nguồn điện
- Dải nhiệt độ hoạt động rộng từ -40 đến 75°C
- Hỗ trợ kênh DFS 5 GHz
Giới thiệu
AP/bridge/client không dây công nghiệp 3 trong 1 AWK-3131A đáp ứng yêu cầu ngày càng tăng về truyền dữ liệu với tốc độ nhanh hơn bằng hỗ trợ công nghệ IEEE 802.11n với tốc độ dữ liệu ròng lên tới 300 Mbps. AWK-3131A tuân thủ các tiêu chuẩn và yêu cầu công nghiệp về dải nhiệt độ hoạt động, điện áp đầu vào nguồn điện, chống xung, nhiễu EDS và chống rung. Hai đầu vào nguồn điện một chiều dự phòng giúp tăng hiệu quả của bộ nguồn, và AWK-3131A có thể được cấp nguồn qua PoE để triển khai dễ dàng hơn. AWK-3131A có thể hoạt động trên cả dải băng tần 2.4 hoặc 5 GHz và tương thích ngược với triển khai 802.11a/b/g hiện hành để đảm bảo đầu tư công nghệ không dây của bạn trong tương lai.
Giải pháp không dây công nghiệp 802.11n tiên tiến
- AP/bridge/client tuân thủ 802.11a/b/g/n để triển khai linh hoạt
- Phần mềm được tối ưu hóa cho khoảng cách truyền không dây xa (LoS, 1 km) và với ăng ten khuếch đại cao bên ngoài
- Hoàn thành dự phòng với bảo vệ AeroLink
- Hỗ trợ 60 client được hỗ trợ đồng thời
- Hỗ trợ kênh DFS cho phép phạm vi rộng hơn của kênh 5 GHz lựa chọn để tránh cơ sở hạ tầng không dây hiện có và sự can thiệp.
Công nghệ không dây tiên tiến
- Chuyển vùng liền mạch với Turbo Roaming dựa trên client cho thời gian tạm thời chuyển vùng < 150 ms giữa các AP (chế độ client)
- Hỗ trợ bảo vệ AeroLink để tạo đường dẫn không dây dự phòng (thời gian tạm thời <300 ms) giữa AP và client (chế độ client)
Độ bền công nghiệp
- Thiết kế tích hợp ăng ten và cách ly nguồn điện để bảo vệ cách điện chống lại các nhiễu điện từ bên ngoài
- Truyền tín hiệu không dây các địa hình nguy hiểm với chứng nhận Class I Div II và ATEX Zone 2
- Dải nhiệt độ hoạt động rộng từ -40 đến 75°C (T model) giúp truyền tín hiệu không dây hiệu quả trong các môi trường khắc nghiệt.
| • WLAN Interface | |
| Standards | IEEE 802.11a/b/g/n for Wireless LAN IEEE 802.11i for Wireless Security IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) IEEE 802.3ab for 1000BaseT IEEE 802.3af for Power-over-Ethernet IEEE 802.1D for Spanning Tree Protocol IEEE 802.1w for Rapid STP IEEE 802.1Q for VLAN |
| Spread Spectrum and Modulation (typical) | • DSSS with DBPSK, DQPSK, CCK • OFDM with BPSK, QPSK, 16QAM, 64QAM • 802.11b: CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps, DBPSK @ 1 Mbps • 802.11a/g: 64QAM @ 54/48 Mbps, 16QAM @ 36/24 Mbps, QPSK @ 18/12 Mbps, BPSK @ 9/6 Mbps • 802.11n: 64QAM @ 300 Mbps to BPSK @ 6.5 Mbps (multiple rates supported) |
| Operating Channels (central frequency) | US: 2.412 to 2.462 GHz (11 channels) 5.180 to 5.240 GHz (4 channels) 5.260 to 5.320 GHz (4 channels)* 5.500 to 5.700 GHz (8 channels, excluding 5.600 to 5.640 GHz)* 5.745 to 5.825 GHz (5 channels) EU: 2.412 to 2.472 GHz (13 channels) 5.180 to 5.240 GHz (4 channels) 5.260 to 5.320 GHz (4 channels)* 5.500 to 5.700 GHz (11 channels)* JP: 2.412 to 2.484 GHz (14 channels) 5.180 to 5.240 GHz (4 channels) 5.260 to 5.320 GHz (4 channels)* 5.500 to 5.700 GHz (11 channels)* |
| *DFS (Dynamic Frequency Selection) channel support | In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However according to regulations, after switching channels, a 60-second availability check period is required before starting the service. |
| Security | • SSID broadcast enable/disable • Firewall for MAC/IP/Protocol/Port-based filtering • 64-bit and 128-bit WEP encryption, WPA/WPA2-Personal and Enterprise (IEEE 802.1X/RADIUS, TKIP, and AES) |
| Transmission Rates | 802.11b: 1, 2, 5.5, 11 Mbps 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps 802.11n: 6.5 to 300 Mbps (multiple rates supported) |
| Transmitter Power | 802.11b: Typ. 26±1.5 dBm @ 1 Mbps, Typ. 26±1.5 dBm @ 2 Mbps Typ. 26±1.5 dBm @ 5.5 Mbps, Typ. 25±1.5 dBm @ 11 Mbps 802.11g: Typ. 23±1.5 dBm @ 6 to 24 Mbps, Typ. 22±1.5 dBm @ 36 Mbps Typ. 20±1.5 dBm @ 48 Mbps, Typ. 19±1.5 dBm @ 54 Mbps 802.11n (2.4 GHz): Typ. 23±1.5 dBm @ MCS0/8 20 MHz, Typ. 18±1.5 dBm @ MCS7/15 20 MHz Typ. 23±1.5 dBm @ MCS0/8 40 MHz, Typ. 17±1.5 dBm @ MCS7/15 40 MHz 802.11a: Typ. 23±1.5 dBm @ 6 to 24 Mbps, Typ. 21±1.5 dBm @ 36 Mbps Typ. 20±1.5 dBm @ 48 Mbps,Typ. 18±1.5 dBm @ 54 Mbps 802.11n (5 GHz): Typ. 23±1.5 dBm @ MCS0/8 20 MHz, Typ. 18±1.5 dBm @ MCS7/15 20 MHz Typ. 23±1.5 dBm @ MCS0/8 40 MHz, Typ. 18±1.5 dBm @ MCS7/15 40 MHz |
| Note | Based on regional regulations, the maximum transmission power allowed on the UNII bands is restricted in the firmware, as indicated below: |
 | |
| Receiver Sensitivity | 802.11b: -93 dBm @ 1 Mbps, -93 dBm @ 2 Mbps -93 dBm @ 5.5 Mbps, -88 dBm @ 11 Mbps 802.11g: -88 dBm @ 6 Mbps, -86 dBm @ 9 Mbps -85 dBm @ 12 Mbps, -85 dBm @ 18 Mbps -85 dBm @ 24 Mbps, -82 dBm @ 36 Mbps -78 dBm @ 48 Mbps, -74 dBm @ 54 Mbps 802.11n (2.4 GHz): -70 dBm @ MCS7 20 MHz, -69 dBm @ MCS15 20 MHz -67 dBm @ MCS7 40 MHz, -67 dBm @ MCS15 40 MHz 802.11a: -90 dBm @ 6 Mbps, -88 dBm @ 9 Mbps -88 dBm @ 12 Mbps, -85 dBm @ 18 Mbps -81 dBm @ 24 Mbps, -78 dBm @ 36 Mbps -74 dBm @ 48 Mbps, -72 dBm @ 54 Mbps 802.11n (5 GHz): -69 dBm @ MCS7 20 MHz, -71 dBm @ MCS15 20 MHz -63 dBm @ MCS7 40 MHz, -68 dBm @ MCS15 40 MHz |
| • Protocol Support | |
| General Protocols | Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, DHCP, VLAN, STP/RSTP |
| • Interface | |
| Default Antennas | 2 dual-band omni-directional antennas, 2 dBi, RP-SMA (male) |
| Connector for External Antennas | RP-SMA (female), 500 V insulation |
| LAN Ports | 1, RJ45, 10/100/1000BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection |
| Console Port | RS-232 (RJ45-type) |
| Reset | Present |
| LED Indicators | PWR1, PWR2, PoE, FAULT, STATE, SIGNAL*, WLAN, LAN |
| • *signal strength indicator | |
| Alarm Contact (digital output) | 1 relay output with current carrying capacity of 1 A @ 24 VDC |
| Digital Inputs | 2 electrically isolated inputs• +13 to +30 V for state “1” • +3 to -30 V for state “0” • Max. input current: 8 mA |
| • Management | |
| Device Management | Wireless Search Utility, MXconfig, SNMP |
| Network Monitoring | MXview |
| • Physical Characteristics | |
| Housing | Metal, IP30 protection |
| Weight | 860 g (1.9 lb) |
| Dimensions | 52.7 x 135 x 105 mm (2.08 x 5.32 x 4.13 in) |
| Installation | DIN-rail mounting (standard), wall mounting (optional) |
| • Environmental Limits | |
| Operating Temperature | Standard Models: -25 to 60°C (-13 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity | 5% to 95% (non-condensing) |
| • Power Requirements | |
| Input Voltage | 12 to 48 VDC, redundant dual DC power inputs or 48 VDC Power-over-Ethernet Plus (IEEE 802.3af compliant) |
| Input Current | 0.6 A @ 12 VDC;0.15 A @ 48 VDC |
| Connector | 10-pin removable terminal block, 500 V insulation |
| Power Consumption | 7.2 W |
| Reverse Polarity Protection | Present |
| • Standards and Certifications | |
| Safety | UL 60950-1, EN 60950-1 |
| Hazardous Location | UL/cUL Class I Division 2, ATEX Zone 2 |
| EMC | EN 61000-6-2/6-4 |
| EMI | CISPR 22, FCC Part 15B Class B |
| EMS | IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV IEC 61000-4-6 CS: 3 V/m IEC 61000-4-8 PFMF: 1 A/m |
| Radio | EN 301 489-1/17, EN 300 328, EN 301 893, TELEC, FCC ID SLE-WAPN008, KC, RCM, MIC, ANATEL, WPC |
| Note | Please check Moxa’s website for the most up-to-date certification status. |
| • MTBF (mean time between failures) | |
| Time | 770,854 hrs |
| Standard | Telcordia SR332 |
Available Models
| Model No. | Description | |
|---|---|---|
| AWK-3131A-US | IEEE 802.11a/b/g/n wireless AP/bridge/client, US band, -25 to 60°C operating temperature | |
| AWK-3131A-US-T | IEEE 802.11a/b/g/n wireless AP/bridge/client, US band, -40 to 75°C operating temperature | |
| AWK-3131A-EU | IEEE 802.11a/b/g/n wireless AP/bridge/client, EU band, -25 to 60°C operating temperature | |
| AWK-3131A-EU-T | IEEE 802.11a/b/g/n wireless AP/bridge/client, EU band, -40 to 75°C operating temperature | |
| AWK-3131A-JP | IEEE 802.11a/b/g/n wireless AP/bridge/client, JP band, -25 to 60°C operating temperature | |
| AWK-3131A-JP-T | IEEE 802.11a/b/g/n wireless AP/bridge/client, JP band, -40 to 75°C operating temperature |
Optional Accessories
Wireless Adaptor
| Model No. | Description | |
|---|---|---|
| A-ADP-RJ458P-DB9F-ABC01 | RJ45-to-DB9 adaptor for the ABC-01 |
Automatic Backup Configurators
| Model No. | Description | |
|---|---|---|
| Automatic Backup Configurator ABC-01 | Configuration backup and restoration tool for managed switches and wireless APs/Bridges/Clients |
Wireless Antenna Cable
| Model No. | Description | |
|---|---|---|
| A-CRF-RMNM-L1-900 | N-type (male) to RP SMA (male), LMR-195 Lite cable, 9 m | |
| A-CRF-RMNM-L1-600 | N-type (male) to RP SMA (male), LMR-195 Lite cable, 6 m | |
| A-CRF-RMNM-L1-300 | N-type (male) to RP SMA (male), LMR-195 Lite cable, 3 m | |
| A-CRF-RFRM-R4-150 | RF magnetic stand, RP-SMA (male) to RP-SMA (female), RG-174/U cable, 1.5 m |
Wireless AP Mounting Kit
| Model No. | Description | |
|---|---|---|
| WK-51-01 | Wall-mounting kit, 51mm wide |
Wireless Terminating Resistor
| Model No. | Description | |
|---|---|---|
| A-TRM-50-RM | Terminating Resistor, 50 ohm, RP-SMA Male |
Surge Arrestor
| Model No. | Description | |
|---|---|---|
| A-SA-NFNF-01 | Surge arrestor, N-type (female) to N-type (female) | |
| A-SA-NMNF-01 | Surge arrester, N-type (female) to N-type (male) |
Wireless LAN Antennas
| Model No. | Description | |
|---|---|---|
| ANT-WSB-ANF-09 | 2.4 GHz,omni-directional antenna, 9 dBi, N-type (female) | |
| ANT-WSB-PNF-12 | 2.4GHz, Directional/Panel antenna, 12dBi, N-type (female) connector | |
| ANT-WSB-PNF-18 | 2.4 GHz, panel antenna, 18 dBi, N-type (female) | |
| ANT-WDB-ANF-0609 | 2.4/5 GHz, dual-band omni-directional antenna, 6/9 dBi, N-type (female) | |
| ANT-WDB-PNF-1518 | 2.4/5 GHz, dual-band panel antenna, 15/18 dBi, N-type (female) | |
| ANT-WDB-ANF-0407 | Dual-band omni-directional antenna: 4 dB at 2.4 GHz and 7 dB at 5 GHz | |
| ANT-WSB-AHRM-05-1.5m | 2.4 GHz, omni-directional/dipole antenna, 5 dBi | |
| ANT-WSB5-ANF-12 | 5 GHz, omni-directional antenna, 12 dBi, N-type (female) | |
| ANT-WSB5-PNF-18 | Directional panel antenna: 18 dBi at 5 GHz | |
| ANT-WDB-ARM-0202 | 1.8/1.8 dBi, RP-SMA (male) antenna | |
| MAT-WDB-CA-RM-2-0205 | MIMO 2×2, 2.4/5 GHz, dual-band ceiling antenna, 2/5 dBi, RP-SMA-type (male) | |
| MAT-WDB-DA-RM-2-0203-1m | MIMO 2×2, 2.4/5 GHz, dual-band desktop antenna, 2/3 dBi, RP-SMA-type (male), 1 m cable | |
| ANT-WDB-ARM-02 | 2.4/5.5 GHz 2 dBi dual-band antenna, RP-SMA (male) connector |
White Paper: A Guide to an Error-Free Wi-Fi Network Lifecycle
In this article, we discuss some key points to consider when planning and deploying a Wi-Fi network in an industrial environment…more
Application Notes: AeroMag Technology for Fast and Easy Wi-Fi Network Deployment and Maintenance
Moxa’s Wi-Fi solution includes AeroMag, a unique technology that can save you significant time and effort on basic device settings when deploying and maintaining a network without compromising on network security….more
Success Stories: Always on the Move – Wireless Success Cases
Learn how Moxa’s AWK-A series wireless devices help build a reliable wireless network and allow our customers to enjoy seamless system mobility in factories…more
White Paper: Five Critical Elements of Uninterrupted Wireless Connectivity for Moving Equipments
To ensure seamless wireless communications for the smooth functioning of your moving equipments, there are some critical aspects that you need to pay special attention to when they deploy wireless solutions in their moving equipments such as AGV systems…..more
