AWK-1131A Series
entry-level industrial IEEE 802.11a/b/g/n wireless AP/client
- Mô tả Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
- Thông số Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
- Ordering Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
- Tài liệu Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
Tính năng và lợi ích
- Hỗ trợ AP/client IEEE 802.11a/b/g/n
- Chuyển vùng liên tục với Turbo Roaming
- Tích hợp ăng ten và cách ly nguồn điện
- Hỗ trợ kênh DFS 5 GHz
Giới thiệu
AP/client không dây công nghiệp AWK-1131A đáp ứng nhu cầu ngày càng tăng về tốc độ truyền dữ liệu thông qua công nghệ IEEE 802.11n với tốc độ truyền lên tới 300 Mbps. AWK-1131A tuân thủ các tiêu chuẩn và phê duyệt công nghiệp, thông qua nhiệt độ hoạt động, điện áp đầu vào nguồn điện, chống xung, chống rung, chống EDS. 2 đầu vào nguồn điện DC dự phòng độc lập tăng độ đáng tin cậy cho bộ nguồn. AWK-1131A có thể hoạt động với băng tần 2.4 hoặc 5 GHz và tương thích ngược với các triển khai 802.11a/b/g hiện hành để đảm bảo các dự án kết nối không dây của bạn trong tương lai.
Cải thiện tốc độ dữ liệu cao hơn và dung lượng các kênh
- Kết nối không dây tốc độ cao với tốc độ truyền dữ liệu lên tới 300 Mbps
- Công nghệ MIMO để cải thiện khả năng truyền và nhận nhiều luồng dữ liệu
- Tăng chiều rộng kênh với công nghệ liên kết kênh
- Hỗ trợ lựa chọn kênh linh hoạt để xây dựng hệ thống kết nối không dây với DFS
Thông số kỹ thuật cho các ứng dụng cấp công nghiệp
- Đầu vào nguồn điện DC dự phòng
- Thiết kế tích hợp với công nghệ bảo vệ nâng cao để đạt mức độ tránh tiếng ồn cao hơn
- Vỏ bọc bằng nhôm kích thước nhỏ gọn tiêu chuẩn IP30
| • WLAN Interface | |
| Standards | IEEE 802.11a/b/g/n for Wireless LAN IEEE 802.11i for Wireless Security IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) IEEE 802.3ab for 1000BaseT |
| Spread Spectrum and Modulation (typical) | • DSSS with DBPSK, DQPSK, CCK • OFDM with BPSK, QPSK, 16QAM, 64QAM • 802.11b: CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps, DBPSK @ 1 Mbps • 802.11a/g: 64QAM @ 54/48 Mbps, 16QAM @ 36/24 Mbps, QPSK @ 18/12 Mbps, BPSK @ 9/6 Mbps • 802.11n: 64QAM @ 300 Mbps to BPSK @ 6.5 Mbps (multiple rates supported) |
| Operating Channels (central frequency) | US: 2.412 to 2.462 GHz (11 channels) 5.180 to 5.240 GHz (4 channels) 5.260 to 5.320 GHz (4 channels)* 5.500 to 5.700 GHz (8 channels, excluding 5.600 to 5.640 GHz)* 5.745 to 5.825 GHz (5 channels) EU: 2.412 to 2.472 GHz (13 channels) 5.180 to 5.240 GHz (4 channels) 5.260 to 5.320 GHz (4 channels)* 5.500 to 5.700 GHz (11 channels)* JP: 2.412 to 2.484 GHz (14 channels, DSSS) 5.180 to 5.240 GHz (4 channels) 5.260 to 5.320 GHz (4 channels)* 5.500 to 5.700 GHz (11 channels)* |
| *DFS (Dynamic Frequency Selection) channel support | In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However according to regulations, after switching channels, a 60-second availability check period is required before starting the service. |
| Security | • SSID broadcast enable/disable • Firewall for MAC/IP/Protocol/Port-based filtering • 64-bit and 128-bit WEP encryption, WPA/WPA2-Personal and Enterprise (IEEE 802.1X/RADIUS, TKIP, and AES) |
| Transmission Rates | 802.11b: 1, 2, 5.5, 11 Mbps 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps 802.11n: 6.5 to 300 Mbps (multiple rates supported) |
| Transmitter Power | 802.11b: Typ. 26±1.5 dBm @ 1 Mbps, Typ. 26±1.5 dBm @ 2 Mbps Typ. 26±1.5 dBm @ 5.5 Mbps, Typ. 25±1.5 dBm @ 11 Mbps 802.11g: Typ. 23±1.5 dBm @ 6 to 24 Mbps, Typ. 22±1.5 dBm @ 36 Mbps Typ. 20±1.5 dBm @ 48 Mbps, Typ. 19±1.5 dBm @ 54 Mbps 802.11n (2.4 GHz): Typ. 23±1.5 dBm @ MCS0/8 20 MHz, Typ. 18±1.5 dBm @ MCS7/15 20 MHz Typ. 23±1.5 dBm @ MCS0/8 40 MHz, Typ. 17±1.5 dBm @ MCS7/15 40 MHz 802.11a: Typ. 23±1.5 dBm @ 6 to 24 Mbps, Typ. 21±1.5 dBm @ 36 Mbps Typ. 20±1.5 dBm @ 48 Mbps,Typ. 18±1.5 dBm @ 54 Mbps 802.11n (5 GHz): Typ. 23±1.5 dBm @ MCS0/8 20 MHz, Typ. 18±1.5 dBm @ MCS7/15 20 MHz Typ. 23±1.5 dBm @ MCS0/8 40 MHz, Typ. 18±1.5 dBm @ MCS7/15 40 MHz |
| Note: Based on regional regulations, the maximum transmission power allowed on the UNII bands is restricted in the firmware, as indicated below: | |
| Receiver Sensitivity | 802.11b: -93 dBm @ 1 Mbps, -93 dBm @ 2 Mbps -93 dBm @ 5.5 Mbps, -88 dBm @ 11 Mbps 802.11g: -88 dBm @ 6 Mbps, -86 dBm @ 9 Mbps -85 dBm @ 12 Mbps, -85 dBm @ 18 Mbps -85 dBm @ 24 Mbps, -82 dBm @ 36 Mbps -78 dBm @ 48 Mbps, -74 dBm @ 54 Mbps 802.11n (2.4 GHz): -70 dBm @ MCS7 20 MHz, -69 dBm @ MCS15 20 MHz -67 dBm @ MCS7 40 MHz, -67 dBm @ MCS15 40 MHz 802.11a: -90 dBm @ 6 Mbps, -88 dBm @ 9 Mbps -88 dBm @ 12 Mbps, -85 dBm @ 18 Mbps -81 dBm @ 24 Mbps, -78 dBm @ 36 Mbps -74 dBm @ 48 Mbps, -72 dBm @ 54 Mbps 802.11n (5 GHz): -69 dBm @ MCS7 20 MHz, -71 dBm @ MCS15 20 MHz -63 dBm @ MCS7 40 MHz, -68 dBm @ MCS15 40 MHz |
| • Protocol Support | |
| General Protocols | Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, DHCP, LLDP |
| • Interface | |
| Default Antennas | 2 dual-band omni-directional antennas, 2 dBi, RP-SMA (male) |
| Connector for External Antennas | RP-SMA (female) |
| LAN Ports | 1, RJ45, 10/100/1000BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection |
| Console Port | RS-232 (RJ45-type) |
| Reset | Present |
| LED Indicators | PWR, FAULT, STATE, SIGNAL*, WLAN, 10/100/1000 (RJ45 port) |
| *signal strength indicator | |
| • Management | |
| Device Management | Wireless Search Utility, MXconfig, SNMP |
| Network Monitoring | MXview |
| • Physical Characteristics | |
| Housing | Metal, IP30 protection |
| Weight | 307 g (0.68 lb) |
| Dimensions | 58 x 115 x 70 mm (2.29 x 4.53 x 2.76 in) |
| Installation | DIN-rail mounting (standard), wall mounting (optional) |
| • Environmental Limits | |
| Operating Temperature | Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity | 5% to 95% (non-condensing) |
| • Power Requirements | |
| Input Voltage | 12 to 48 VDC, redundant dual DC power inputs |
| Input Current | 0.56 A @ 12 VDC; 0.14 A @ 48 VDC |
| Connector | 4-pin removable terminal block, 500 V insulation |
| Power Consumption | 6.96 W |
| Reverse Polarity Protection | Present |
| • Standards and Certifications | |
| Safety | UL 60950-1, EN 60950-1 |
| EMC | EN 55032/24 |
| EMI | CISPR 32, FCC Part 15B Class B |
| EMS | IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV IEC 61000-4-6 CS: 3 V IEC 61000-4-8 |
| Radio | EN 301 489-1/17, EN 300 328, EN 301 893, TELEC, FCC ID SLE-WAPN008, KC, RCM |
| • MTBF (mean time between failures) | |
| Time | 749,476 hrs |
| Standard | Telcordia SR332 |
Available Models
| Model No. | Description | |
|---|---|---|
| AWK-1131A-US | IEEE 802.11a/b/g/n wireless AP/client, US band, 0 to 60°C operating temperature | |
| AWK-1131A-US-T | IEEE 802.11a/b/g/n wireless AP/client, US band, -40 to 75°C operating temperature | |
| AWK-1131A-EU | IEEE 802.11a/b/g/n wireless AP/client, EU band, 0 to 60°C operating temperature | |
| AWK-1131A-EU-T | IEEE 802.11a/b/g/n wireless AP/client, EU band, -40 to 75°C operating temperature | |
| AWK-1131A-JP | IEEE 802.11a/b/g/n wireless AP/client, JP band, 0 to 60°C operating temperature | |
| AWK-1131A-JP-T | IEEE 802.11a/b/g/n wireless AP/client, JP band, -40 to 75°C operating temperature |
Optional Accessories
| Model No. | Description | |
|---|---|---|
| A-ADP-RJ458P-DB9F-ABC01 | RJ45-to-DB9 adaptor for the ABC-01 |
| Model No. | Description | |
|---|---|---|
| A-CRF-RMNM-L1-900 | N-type (male) to RP SMA (male), LMR-195 Lite cable, 9 m | |
| A-CRF-RMNM-L1-600 | N-type (male) to RP SMA (male), LMR-195 Lite cable, 6 m | |
| A-CRF-RMNM-L1-300 | N-type (male) to RP SMA (male), LMR-195 Lite cable, 3 m | |
| CRF-N0117SA-3M | N-type (male) to RP SMA (male), CFD200 cable, 3 m | |
| A-CRF-RFRM-R4-150 | RF magnetic stand, RP-SMA (male) to RP-SMA (female), RG-174/U cable, 1.5 m |
| Model No. | Description | |
|---|---|---|
| WK-51-01 | Wall-mounting kit, 51mm wide |
| Model No. | Description | |
|---|---|---|
| A-TRM-50-RM | Terminating Resistor, 50 ohm, RP-SMA Male |
| Model No. | Description | |
|---|---|---|
| A-SA-NFNF-01 | Surge arrestor, N-type (female) to N-type (female) | |
| A-SA-NMNF-01 | Surge arrester, N-type (female) to N-type (male) |
| Model No. | Description | |
|---|---|---|
| ANT-WSB-ANF-09 | 2.4 GHz,omni-directional antenna, 9 dBi, N-type (female) | |
| ANT-WSB-PNF-12 | 2.4GHz, Directional/Panel antenna, 12dBi, N-type (female) connector | |
| ANT-WSB-PNF-18 | 2.4 GHz, panel antenna, 18 dBi, N-type (female) | |
| ANT-WDB-ANF-0609 | 2.4/5 GHz, dual-band omni-directional antenna, 6/9 dBi, N-type (female) | |
| ANT-WDB-PNF-1518 | 2.4/5 GHz, dual-band panel antenna, 15/18 dBi, N-type (female) | |
| ANT-WDB-ANF-0407 | Dual-band omni-directional antenna: 4 dB at 2.4 GHz and 7 dB at 5 GHz | |
| ANT-WSB-AHRM-05-1.5m | 2.4 GHz, omni-directional/dipole antenna, 5 dBi | |
| ANT-WSB5-ANF-12 | 5 GHz, omni-directional antenna, 12 dBi, N-type (female) | |
| ANT-WSB5-PNF-18 | Directional panel antenna: 18 dBi at 5 GHz | |
| ANT-WDB-ARM-0202 | 1.8/1.8 dBi, RP-SMA (male) antenna | |
| MAT-WDB-DA-RM-2-0203-1m | MIMO 2×2, 2.4/5 GHz, dual-band desktop antenna, 2/3 dBi, RP-SMA-type (male), 1 m cable |
Success Stories: Always on the Move – Wireless Success Cases
Learn how Moxa’s AWK-A series wireless devices help build a reliable wireless network and allow our customers to enjoy seamless system mobility in factories…more
White Paper: Five Critical Elements of Uninterrupted Wireless Connectivity for Moving Equipments
To ensure seamless wireless communications for the smooth functioning of your moving equipments, there are some critical aspects that you need to pay special attention to when they deploy wireless solutions in their moving equipments such as AGV systems…..more
