AWK-3121-RTG Series

Industrial IEEE 802.11a/b/g wireless AP/client

Danh mục: Wayside, Rail Wireless LAN

Datasheet

Manual

Drivers and Software

Phrase out

Tính năng và lợi ích

Tuân thủ tiêu chuẩn IEEE 802.11a/b/g
Connector M12 chống rung (AWK-3121-M12-RTG và AWK-3121-M12-HP-RTG)
QoS (WMM) và VLAN giúp lưu lượng mạng hiệu quả
Chuyển vùng nhanh dựa trên bộ điều khiển (thời gian bàn giao < 50 ms @ 3 kênh, WPA2), chỉ có sẵn khi được sử dụng với WAC-1001 hoặc WAC-2004
Hỗ trợ truyền dữ liệu khoảng cách xa (AWK-3121-M12-HP-RTG)
Tuân thủ một phần thông số kỹ thuật tiêu chuẩn EN 50155
Nhiệt độ hoạt động rộng -40 đến 75°C (mã T)

Giới thiệu

Thiết bị AP/client công nghiệp 3-trong-1 AWK-3121-RTG được thiết kế đặc biệt cho ứng dụng tàu điện ngầm trong khi di chuyển với tốc độ lên tới 120 km/h. AWK-3121-RTG tuân thủ một phần thông số kỹ thuật tiêu chuẩn EN 50155 thông qua nhiệt độ hoạt động, điện áp đầu vào nguồn điện, chống xung, ESD, chống rung, điều này giúp các sản phẩm phù hợp cho nhiều ứng dụng công nghiệp. Lắp đặt dễ dàng với thiết kế gắn vào thanh DIN hoặc hộp phân phối, khả năng gắn vào thanh DIN, nhiệt độ hoạt động rộng, vỏ bọc tiêu chuẩn IP30 với đèn LED chỉ thị giúp AWK-3121-RTG trở thành giải pháp thuận tiện đáng tin cậy cho bất kỳ ứng dụng máy móc nào.

Bảo mật nâng cao

WEP 64-bit và 128-bit (Wired Equivalent Privacy)
Bật tắt các chương trình phát sóng SSID
WPA/WPA2 (Truy cập Wi-Fi được bảo vệ) và hỗ trợ 802.11i
Hỗ trợ IEEE802.1X/RADIUS
Bộ lọc mạnh mẽ để kiểm soát truy cập

Thông số kỹ thuật cho các ứng dụng tàu điện ngầm

Thời gian bàn giao chuyển vùng nhanh dựa trên client
Thời gian bàn giao chuyển vùng nhanh dựa trên bộ điều khiển (chỉ có sẵn khi được sử dụng với WAC-1001 hoặc WAC-2004)
Các thông số chuyển vùng đa hướng cho các cấu trúc lắp đặt và loại ăng ten khác nhau

• WLAN Interface
Standards	IEEE 802.11a/b/g for Wireless LAN IEEE 802.11i for Wireless Security IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseTX IEEE 802.3af for Power-over-Ethernet*
Note	*Hardware Rev. 3.0.0 supports PoE; hardware Rev. 2.0.0 does not support PoE.
Spread Spectrum and Modulation (typical)	• DSSS with DBPSK, DQPSK, CCK • OFDM with BPSK, QPSK, 16QAM, 64QAM • 802.11b: CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps, DBPSK @ 1 Mbps • 802.11a/g: 64QAM @ 54/48 Mbps, 16QAM @ 36/24 Mbps, QPSK @ 18/12 Mbps, BPSK @ 9/6 Mbps
Operating Channels (central frequency)	US: 2.412 to 2.462 GHz (11 channels) 5.18 to 5.24 GHz (4 channels) 5.26 to 5.825 GHz (optional) EU: 2.412 to 2.472 GHz (13 channels) 5.18 to 5.24 GHz (4 channels) 5.26 to 5.825 GHz (optional) *Special bands, such as 5.9 GHz, are customizable.
Security	• SSID broadcast enable/disable • Firewall for MAC/IP/Protocol/Port-based filtering • 64-bit and 128-bit WEP encryption, WPA/WPA2-Personal and Enterprise (IEEE 802.1X/RADIUS, TKIP, and AES)
Transmission Rates	802.11b: 1, 2, 5.5, 11 Mbps 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
TX Transmit Power	AWK-3121-M12-RTG and AWK-3121-SSC-RTG: 802.11b: Typ. 23±1.5 dBm @ 1 to 11 Mbps 802.11g: Typ. 20±1.5 dBm @ 6 to 24 Mbps, Typ. 19±1.5 dBm @ 36 Mbps, Typ. 18±1.5 dBm @ 48 Mbps, Typ. 17±1.5 dBm @ 54 Mbps 802.11a: Typ. 18±1.5 dBm @ 6 to 24 Mbps, Typ. 16±1.5 dBm @ 36 to 48 Mbps, Typ. 15±1.5 dBm @ 54 Mbps AWK-3121-M12-HP-RTG: 802.11b: Typ. 26±1.5 dBm @ 1 to 11 Mbps 802.11g: Typ. 26±1.5 dBm @ 6 to 24 Mbps, Typ. 25±1.5 dBm @ 36 Mbps, Typ. 24±1.5 dBm @ 48 Mbps, Typ. 23±1.5 dBm @ 54 Mbps 802.11a: Typ. 26±1.5 dBm @ 6 to 24 Mbps, Typ. 25±1.5 dBm @ 36 Mbps, Typ. 24±1.5 dBm @ 48 Mbps, Typ. 23±1.5 dBm @ 54 Mbps
RX Sensitivity	802.11b: -97 dBm @ 1 Mbps, -94 dBm @ 2 Mbps, -92 dBm @ 5.5 Mbps, -90 dBm @ 11 Mbps 802.11g: -93 dBm @ 6 Mbps, -91 dBm @ 9 Mbps, -90 dBm @ 12 Mbps, -88 dBm @ 18 Mbps, -84 dBm @ 24 Mbps, -80 dBm @ 36 Mbps, -76 dBm @ 48 Mbps, -74 dBm @ 54 Mbps 802.11a: -90 dBm @ 6 Mbps, -89 dBm @ 9 Mbps, -89 dBm @ 12 Mbps, -85 dBm @ 18 Mbps, -83 dBm @ 24 Mbps, -79 dBm @ 36 Mbps, -75 dBm @ 48 Mbps, -74 dBm @ 54 Mbps
• Protocol Support
General Protocols	Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, PPPoE, DHCP
• Interface
Connector for External Antennas	AWK-3121-SSC-RTG: RP-SMA (female) AWK-3121-M12-RTG and AWK-3121-M12-HP-RTG: QMA (female)
Fiber Ports	1, 100BaseFX port (SC connector, AWK-3121-SSC-RTG only)
M12 Ports	1, 10/100BaseT(X) auto negotiation speed, D-coded, F/H duplex mode, and auto MDI/MDI-X connection (AWK-3131A-M12-RTG only)
Console Port	RS-232 (RJ45-type)
LED Indicators	PWR1, PWR2, PoE(support for PoE discontinued starting with hardware Rev. 2.0.0), FAULT, STATE, signal strength, CLIENT MODE, WLAN, 10/100 (M12 port), 100M (fiber port) PoE is only available for the AWK-3121-M12-RTG and AWK-3121-M12-HP-RTG
Alarm Contact	1 relay output with current carrying capacity of 1 A @ 24 VDC
Digital Inputs	2 electrically isolated inputs • +13 to +30 V for state “1” • +3 to -30 V for state “0” • Max. input current: 8 mA
Default Antennas*	2 dual-band omni-directional antennas, 2 dBi, RP-SMA (male) *Only available with the AWK-3121-SSC-RTG models.
• Optical Fiber*

• Physical Characteristics
Housing	Metal, IP30 protection
Weight	850 g (1.87 lb)
Dimensions	53 x 135 x 105 mm (2.08 x 5.31 x 4.13 in)
Installation	DIN-rail mounting, wall mounting (optional)
• Environmental Limits
Operating Temperature	Standard Models: -25 to 60°C (-13 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5% to 95% (non-condensing)
• Power Requirements
Input Voltage	12 to 48 VDC, redundant dual DC power inputs or 48 VDC Power-over-Ethernet (IEEE 802.3af compliant) (support for PoE discontinued starting with hardware Rev. 2.0.0)
Input Current	0.5 A @ 12 VDC; 0.2 A @ 48 VDC
Connector	10-pin removable terminal block
Reverse Polarity Protection	Present
• Standards and Certifications
Safety	UL 60950-1, IEC 60950-1(CB)
EMC	EN 55032/24
EMI	CISPR 32, FCC Part 15B Class B
EMS	IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8
Radio	EN 301 489-1/17, EN 300 328, EN 301 893, FCC ID SLE-WAPA003 (AWK-3121-M12-RTG), FCC ID SLE-WAPA004 (AWK-3121-M12-HP-RTG)
Rail Traffic	EN 50155, EN45545-2, EN 50121-4 Complies with a portion of EN 50155 specifications.
• MTBF (mean time between failures)
Time	AWK-3121-M12-RTG: 480,831 hrs AWK-3121-M12-HP-RTG: 447,861 hrs AWK-3121-SSC-RTG: 445,913 hrs
Standard	Telcordia SR332

Available Models

	Model No.	Description
	AWK-3121-M12-RTG-EU-CT-T	Train to ground, IEEE 802.11a/b/g AP/client, M12/QMA, EU band, -40 to 75°C operating temperature, conformal coating
	AWK-3121-M12-RTG-EU-CT	Train to ground, IEEE 802.11a/b/g AP/client, M12/QMA, EU band, -25 to 60°C operating temperature, conformal coating
	AWK-3121-M12-RTG-EU-T	Train to ground, IEEE 802.11a/b/g AP/client, M12/QMA, EU band, -40 to 75°C operating temperature
	AWK-3121-M12-RTG-EU	Train to ground, 802.11a/b/g AP/client, M12/QMA, EU band, -25 to 60°C operating temperature
	AWK-3121-M12-RTG-US-CT-T	Train to ground, 802.11a/b/g AP/client, M12/QMA, US band, -40 to 75°C operating temperature, conformal coating
	AWK-3121-M12-RTG-US-CT	Train to ground, 802.11a/b/g AP/client, M12/QMA, US band, -25 to 60°C operating temperature, conformal coating
	AWK-3121-M12-RTG-US-T	Train to ground, 802.11a/b/g AP/client, M12/QMA, US band, -40 to 75°C operating temperature
	AWK-3121-M12-RTG-US	Train to ground, 802.11a/b/g AP/client, M12/QMA, US band, -25 to 60°C operating temperature
	AWK-3121-SSC-RTG-EU-T	Train to ground, 802.11a/b/g AP/client, SSC/RP-SMA, EU band, -40 to 75°C operating temperature
	AWK-3121-SSC-RTG-EU	Train to ground, 802.11a/b/g AP/client, SSC/RP-SMA, EU band, -25 to 60°C operating temperature
	AWK-3121-SSC-RTG-US-T	Train to ground, 802.11a/b/g AP/client, SSC/RP-SMA, US band, -40 to 75°C operating temperature
	AWK-3121-SSC-RTG-US	Train to ground, 802.11a/b/g AP/client, SSC/RP-SMA, US band, -25 to 60°C operating temperature
	AWK-3121-M12-HP-RTG-US	Train to ground, 802.11a/b/g AP/client, M12/QMA, high power, US band, -25 to 60°C operating temperature
	AWK-3121-M12-HP-RTG-EU	Train to ground, 802.11a/b/g AP/client, M12/QMA, high power, EU band, -25 to 60°C operating temperature
	AWK-3121-M12-HP-RTG-US-T	Train to ground, 802.11a/b/g AP/client, M12/QMA, high power, US band, -40 to 75°C operating temperature
	AWK-3121-M12-HP-RTG-EU-T	Train to ground, 802.11a/b/g AP/client, M12/QMA, high power, EU band, -40 to 75°C operating temperature
	AWK-3121-M12-HP-RTG-US-CT	Train to ground, 802.11a/b/g AP/client, M12/QMA, high power, US band, -25 to 60°C operating temperature, conformal coating
	AWK-3121-M12-HP-RTG-EU-CT	Train to ground, 802.11a/b/g AP/client, M12/QMA, high power, EU band, -25 to 60°C operating temperature, conformal coating
	AWK-3121-M12-HP-RTG-US-CT-T	Train to ground, 802.11a/b/g AP/client, M12/QMA, high power, US band, -40 to 75°C operating temperature, conformal coating
	AWK-3121-M12-HP-RTG-EU-CT-T	Train to ground, 802.11a/b/g AP/client, M12/QMA, high power, EU band, -40 to 75°C operating temperature, conformal coating

Optional Accessories

Trial Software

	Model No.	Description
	MXview	Industrial network management software designed for converged automation networks

Wireless Adaptor

	Model No.	Description
	A-ADP-QMAM-RF	QMA (male) to RP-SMA (female), antenna adapter
	A-ADP-RJ458P-DB9F-ABC01	RJ45-to-DB9 adaptor for the ABC-01

Wireless Antenna Cable

	Model No.	Description
	A-CRF-QMAMNM-R2-50	QMA (male) to N-type (male), RG-316 cable, 0.5 m
	A-CRF-RFQMAM-R2-50	QMA (male) to RP-SMA (male), 0.5 m

Wireless Connector Cap

	Model No.	Description
	A-CAP-M12F-M	Metal Cap for M12 Female Connector

Wireless AP Mounting Kit

	Model No.	Description
	DK-DC50131	Din-rail mounting kit
	WK-51-01	Wall-mounting kit, 51mm wide

Wireless Terminating Resistor

	Model No.	Description
	A-TRM-50-RM	Terminating Resistor, 50 ohm, RP-SMA Male

Surge Arrestor

	Model No.	Description
	A-SA-NFNF-01	Surge arrestor, N-type (female) to N-type (female)
	A-SA-NMNF-01	Surge arrester, N-type (female) to N-type (male)

Wireless LAN Antennas

	Model No.	Description
	ANT-WSB-ANF-09	2.4 GHz,omni-directional antenna, 9 dBi, N-type (female)
	ANT-WSB-PNF-12	2.4GHz, Directional/Panel antenna, 12dBi, N-type (female) connector
	ANT-WSB-PNF-18	2.4 GHz, panel antenna, 18 dBi, N-type (female)
	ANT-WDB-ANF-0609	2.4/5 GHz, dual-band omni-directional antenna, 6/9 dBi, N-type (female)
	ANT-WDB-PNF-1518	2.4/5 GHz, dual-band panel antenna, 15/18 dBi, N-type (female)
	ANT-WDB-ANF-0407	Dual-band omni-directional antenna: 4 dB at 2.4 GHz and 7 dB at 5 GHz
	ANT-WSB-AHRM-05-1.5m	2.4 GHz, omni-directional/dipole antenna, 5 dBi
	ANT-WSB5-ANF-12	5 GHz, omni-directional antenna, 12 dBi, N-type (female)
	ANT-WSB5-PNF-18	Directional panel antenna: 18 dBi at 5 GHz

Moxa WLAN Calculator

White Paper: The Four Most Useful Technologies for Train-to-Ground Communications

Wireless networks are easier to deploy than wired networks, but they can only be used for demanding industrial applications if they meet high reliability and bandwidth requirements. Today, however, wireless technologies are now mature enough to support critical industrial systems and intense applications such as video-over-wireless.This guidebook provide greater insight into the benefits Moxa can offer customers who would like to implement seamless video transmission over high bandwidth wireless networks.