CI-134 Series

4-port RS-422/485 ISA serial boards

Danh mục: ISA Serial Boards Từ khóa: Bộ chuyển đổi, Bộ chuyển đổi RS232/RS485 sang Ethernet, Bộ chuyển đổi tín hiệu serial, bộ chuyển đổi tín hiệu serial sang ethernet, Đại lý phân phối hàng đầu của Moxa tại Việt Nam, Giải pháp Ethernet công nghiệp, kết nối viễn thông, Moxa Việt Nam, switch ethernet công nghiệp, thiết bị chuyển đổi tín hiệu serial, Thiết bị kết nối viễn thông trong công nghiệp

CI-134 Series Datasheet

CI-134 Series Quick Installation Guide

CI-134 User Manual

MOXA Intelligent, Smartio, Industio Windows XP User’s Manual

Smartio/Industio Family Windows 2000 Driver Installation Guide

PComm Lite – Serial Communication Tool for Windows 2000, XP, 2003, Vista, 2008, 7 (x86 and x64)

ViewCOM

Features and Benefits

Cost-effective ISA boards with 4 RS-422/485 ports
RS-485 data direction control with ADDC® or by RTS
921.6 kbps maximum baudrate for super fast data transmission
16-byte FIFO and on-chip hardware flow control
Surge protection and electrical isolation available
Built-in termination resistors

Overview

The CI-134 series ISA boards come with 4 independent RS-422/485 serial ports for connecting data acquisition equipment and other serial devices to a PC. Connect your devices over longer distances—up to 1.2 km (4000 ft)—and ensure greater reliability in industrial environments with on-board surge protection and electrical isolation (available with some models). Enjoy greater versatility by using point-to-point full duplex connections, or set up a half duplex RS-485 multi-drop network.

• Hardware
Comm. Controller	16C550C or compatible x 4
Bus	16-bit ISA
Connector	DB37 female
• Serial Interface
Number of Ports	4
Serial Standards	RS-422/485
Max. No. of Boards per PC	4
• Serial Line Protection
Electrical Isolation	2 kV (CI-134I/IS only)
• Performance
Baudrate	50 bps to 921.6 kbps
Built-in Termination Resistor	120 ohm (enabled by jumper for RS-485-2w)
• Serial Communication Parameters
Data Bits	5, 6, 7, 8
Stop Bits	1, 1.5, 2
Parity	None, Even, Odd, Space, Mark
I/O Address	0x0000-0xFFFF (default = 0x180)
IRQ	2 (9), 3, 4, 5, 7, 10 (default), 11, 12, 15
• Serial Signals
RS-422	TxD+(B), TxD-(A), RxD+(B), RxD-(A), RTS+(B), RTS-(A), CTS+(B), CTS-(A), GND
RS-485-4w	TxD+(B), TxD-(A), RxD+(B), RxD-(A), GND
RS-485-2w	Data+(B), Data-(A), GND
• Physical Characteristics
Dimensions	CI-134: 85 x 160 mm (3.35 x 6.30 in) CI-134I/IS: 110 x 180 mm (4.33 x 7.09 in)
• Driver Support
Windows	Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows 3.x, DOS, Windows Embedded CE 5.0/6.0, Windows XP Embedded
Linux	Linux 2.4.x, 2.6.x, 3.x
Unix-like Systems	QNX 6, SCO OpenServer, UnixWare 7, Solaris 10, FreeBSD
Note: Please refer to Moxa’s website for the latest driver support information.
• Environmental Limits
Operating Temperature	0 to 55°C (32 to 131°F)
Storage Temperature	-20 to 85°C (-4 to 185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)
• Standards and Certifications
EMC	EN 55032/24
EMI	CISPR 32, FCC Part 15B Class B
EMS	IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Signal: 2 kV
• MTBF (mean time between failures)
Time	424,655 hrs
Standard	Telcordia (Bellcore) TR/SR
• Power Requirements
Input Current	CI-134: 450 mA @ 5 VDC CI-134I: 610 mA @ 5 VDC CI-134IS: 620 mA @ 5 VDC
• Warranty
Warranty Period	5 years
Details	See www.moxa.com/warranty

Available Models

	Model No.	Description
	CI-134-DB9M	4-port RS-422/485 ISA serial board (includes DB9 male cable)
	CI-134I-DB9M	4-port RS-422/485 ISA serial board with optical isolation (includes DB9 male cable)
	CI-134IS-DB9M	4-port RS-422/485 ISA serial board with optical isolation and surge protection (includes DB9 male cable)

Optional Accessories

Connection Cables

	Model No.	Description
	CBL-M37M9x4-30 (Opt4D)	DB37(M) to 4 x DB9(M) Cable
	CBL-M37M25x4-30	DB37(M) to 4 x DB25(M) Cable