VPort 461A
Superior video performance, 1-channel H.264/MJPEG industrial video encoders
- Mô tả Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
- Thông số Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
- Ordering Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
- Tài liệu Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
Feature and Benefits.jpg)
- Supports up to 3 video streams simultaneously for H.264 and MJPEG
- Up to Full D1 resolution (720 x 480) @ 90 FPS for 3 video streams with legacy analog video images
- Video latency under 200 ms
- 2 Ethernet ports for cascade and Ethernet port redundancy
- Moxa DynaStream™ function support for network efficiency
- ONVIF support for standardization and interoperability
- Local storage capability with SD card slot
- Industrial design with -40 to 75°C operating temperature
Introduction
The VPort 461A 1-channel industrial video encoder with H.264 video compression algorithm provides the best video quality on the market, but with a smaller bandwidth requirement than other video compression standards. In addition, to meet various video stream requirements, the VPort 461A can provide up to 3 video streams simultaneously using H.264 and MJPEG compression formats. Video streams can be used for different purposes, such as viewing,recording, and analyzing. In addition, the industrial rugged design, which includes a -40 to 75°C operating temperature, IP30 protection, and industrial certifications, make the VPort 461A suitable for harsh environments.
The VPort 461A is equipped with Moxa’s innovative DynaStream™ technology to reduce bandwidth consumption of your video transmissions when the network is over-loaded by automatically decreasing the video frame rate. DynaStream™ can also increase video FPS when emergencies occur, offering total control of bandwidthusage to network administrators.
| • Video | |
| Video Compression | H.264 (MPEG4 part 10), MJPEG |
| Video Inputs | 1 (BNC connector) |
| Video Output | via Ethernet |
| Video Streams | 3, H.264 or MJPEG video streams |
| NTSC/PAL | Auto-sensing or manual |
| Video Resolution and FPS (frames per second) |  |
| Video Viewing | • DynaStream™ support for changing the video frame rate automatically • Adjustable image size and quality • Timestamp and text overlay • Maximum of 10 simultaneous unicast connections, 50 multicast clients • CBR Pro™ support for accurate streaming bit rate control • Image manipulation: 180° rotation • Image tuning: control brightness, contrast, saturation |
| • Audio | |
| Audio Inputs | 1 Line-in or mic-in with 3.5 mm phone jack |
| Audio Outputs | 1 Line-out with 3.5 mm phone jack |
| Audio Format | Mono, PCM (G.711) |
| • Network | |
| Protocols | IPv4/v6, UDP, HTTP, SMTP, FTP, NTP, DNS, DHCP, UPnP, RTP, RTSP, ICMP, IGMPv3, QoS (ToS), SNMP V3, DDNS, Modbus/TCP, 802.1X, SSH/HTTPS |
| Ethernet | 2 10/100BaseT(X) Ethernet ports, RJ45 connector |
| • Serial Port | |
| PTZ Ports | 1 RS-232 or RS-422/485 port, terminal block connector, 115.2 kbps |
| COM Ports | 1 RS-232 or 485 port, DB9 male connector, 115.2 kbps |
| Console Port | 1 RS-232 port, RJ45 connector |
| • Local Storage | |
| SD Socket | Standard SD socket, V2.0 (SDHC) |
| • GPIO | |
| Digital Inputs | 2, max. 8 mAHigh: +13 to +30 V; Low: -30 to +3 V |
| Relay Outputs | 2, max. 24 VDC @ 1 A |
| • LED Indicators | |
| STAT | Indicates if system is booted up properly or not |
| PWR1 | Power 1 |
| PWR2 | Power 2 |
| FAULT | Can be configured to correspond to system alarm, power failure, or disconnected network |
| VIDEO | Video input signal |
| PTZ | Indicates if PTZ or COM port data has been transmitted |
| SD | Indicates if SD card was mounted successfully |
| • Power Requirements | |
| Input Voltage | 12 to 32 VDC, or 18 to 30 VAC |
| Input Current | 0.85 A @ 12 VDC; 0.3 A @ 32 VDC; 0.85 A @ 18 VAC; 0.56 A @ 30 VAC |
| • Physical Characteristics | |
| Housing | Metal, IP30 protection |
| Dimensions | 46 x 134 x 105 mm (1.81 x 5.31 x 4.13 in) |
| Weight | 710 g (1.57 lb), including DIN-rail mounting kit |
| Installation | DIN-rail mounting (standard), wall mounting (optional) |
| • Alarms | |
| Intelligent Video | Camera tampering |
| Video Motion Detection | Includes sensitivity tuning |
| Scheduling | Daily repeat timing schedule |
| Imaging | JPEG snapshots for pre/trigger/post alarm images |
| Custom Alarms | HTTP event servers and CGI events for setting customized alarm actions |
| Email/FTP Messaging | Automatic transfer of stored images via email or FTP with event-triggered actions |
| Pre-alarm Buffer | 50 MB for JPEG snapshot images |
| • PTZ (Pan/Tilt/Zoom) | |
| PTZ Camera Control | Via PTZ port or COM port |
| PTZ Control Functions | Pan, tilt, zoom, focus, moving speed, preset position (max. 128 positions) |
| PTZ Function Updates | Driver upload supported |
| Supported Device Protocols | Pelco D, Pelco P, Custom Camera |
| • Security | |
| Password | User level password protection |
| Filtering | By IP address |
| Authentication | 802.1X |
| Encryption | HTTPS, SSH |
| • Environmental Limits | |
| Operating Temperature | Standard Models: -25 to 60°C (-13 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| Vibration | IEC 60068-2-6, 2 to 13.2 Hz: 2 mm (peak-peak); 13.2 to 100 Hz: 0.7g; 1.50 hrs/axis IEC 60068-2-6, 3 to 9 Hz: 7 mm (peak-peak); 9 to 150 Hz: 1.0g; 1.86 hrs/axis |
| Shock | IEC 60068-2-27, 20g/11ms |
| Altitude | 2000 m |
| Ingress Protection | IEC 60529, IP30 |
| • Standards and Certifications | |
| Safety | UL 60950-1 |
| EMC | EN 55032/24 |
| EMI | CISPR 32, FCC Part 15B Class A |
| EMS | IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8 IEC 61000-4-11 |
| Transportation | NEMA TS2 |
| • MTBF (mean time between failures) | |
| Time | 647,088 hrs |
| Standard | Telcordia SR332 |
| • Warranty | |
| Warranty Period | 5 years |
| Details | See www.moxa.com/warranty |
| • Minimum Viewing System Requirements | |
| CPU | Pentium 4, 2.4 GHz or above |
| Memory | 512 MB memory or above |
| OS | Windows XP/2000 with SP4 or above, Windows Vista, Windows 7 |
| Browser | Internet Explorer 9.x or above |
| Multimedia | DirectX 9.0c or above |
| • Software Development | |
| VPort SDK PLUS | Includes CGI commands, ActiveX Control, and API library for customized applications or system integration for third-party developers (the latest version of SDK is available for download from Moxa’s website). |
| Standard | ONVIF, Profile S |
Available Models
| Model No. | Description | |
|---|---|---|
| VPort 461A | 1-channel H.264/MJPEG industrial video encoder with 2 10/100BaseT(X) ports, -25 to 60°C operating temperature | |
| VPort 461A-T | 1-channel H.264/MJPEG industrial video encoder with 2 10/100BaseT(X) ports, -40 to 75°C operating temperature |
Optional Accessories
| Model No. | Description | |
|---|---|---|
| MDR-60-24 | 60W/2.5A DIN-Rail 24 VDC power supply with universal 85 to 264 VAC or 120-370 VDC input, -20 to 70°C operating temperature | |
| MDR-40-24 | 40W/1.7A DIN-Rail 24 VDC power supply with universal 85 to 264 VAC or 120-370 VDC input , -20 to 70°C operating temperature |
| Model No. | Description | |
|---|---|---|
| SoftNVR-IA | 64-channel IP video surveillance software designed for industrial automation systems |
| Model No. | Description | |
|---|---|---|
| DR-4524/75-24/120-24 | 45/75/120 W DIN-Rail 24 VDC power supplies |
| Model No. | Description | |
|---|---|---|
| WK-46 | Wall Mounting Kit | |
| RK-4U | 4U-high 19″ rack mounting kit |
