- Mô tả Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
- Thông số Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
- Ordering Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
- Tài liệu Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
Features
- LFP (Link Fault Pass-through) and FEF (Far End Fault)
- Supports Store-and-Forward mode and Pass Through mode
- Auto Negotiation
- Supports IEEE 802.3AH OAM protocol
- Plug and Play
- Hot-swap
- IP-based remote management
- Supports WDM type modules
Introduction
The CSM-400 modules are slide-in Ethernet-to-fiber managed media converters for the NRack System™. The modules provide media conversion from 10/100BaseT(X) to 100BaseFX (with SC/ST connectors), and can be installed in any NRack System™ chassis. The CSM-400 modules support LFP and FEF for easily tracing network link failures, and support store-and-forward and pass through modes, 802.3AM OAM for remote management and monitoring, as well as WDM-type fiber modules to reduce fiber cable cost.
| • Technology | |
| Standards | IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X), 100BaseFX |
| • Interface | |
| RJ45 Ports | 10/100BaseT(X) |
| Fiber Ports | 100BaseFX (SC/ST connectors) |
| LED Indicators | PWR, Fiber Link, 10/100M (TP port) |
| • Optical Fiber | |
| • Physical Characteristics | |
| Dimensions | 86.8 x 124.3 x 21 mm (3.42 x 4.89 x 0.83 in) |
| Weight | Product only: CSM-400-1213/1214/1218: 115 g (0.25 lb) CSM-400-1224/1225: 125 g (0.28 lb) Packaged: CSM-400-1213/1214/1218: 170 g (0.37 lb) CSM-400-1224/1225: 180 g (0.40 lb) |
| • Environmental Limits | |
| Operating Temperature | Standard Models: -20 to 55°C (-4 to 131°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| • Power Requirements | |
| Input Voltage | 12 VDC |
| Input Current | 220 mA @ 12 VDC max. |
| • Standards and Certifications | |
| Safety | UL 60950-1 |
| EMC | EN 55032/24 |
| EMI | CISPR 32, FCC Part 15B Class A |
| EMS | EN 61000-4-2 (ESD): Contact: 4 kV; Air: 8 kV EN 61000-4-3 (RS): 80 MHz to 1 GHz: 3 V/m EN 61000-4-4 (EFT): Power: 1 kV; Signal: 0.5 kV EN 61000-4-5 (Surge): Power: 1 kV; Signal: 0.5 kV EN 61000-4-6 (CS): 150 kHz to 80 MHz: 3 V/m EN 61000-4-8 (PFMF) EN |
| Freefall | IEC 60068-2-32 |
| • MTBF (mean time between failures) | |
| Time | 1,454,560 hrs |
| Standard | Telcordia (Bellcore), GB |
Available Models
| Model No. | Description |
|---|---|
| CSM-400-1213 | 10/100BaseT(X) to 100BaseFX slide-in management module converter, multi-mode ST connector, -20 to 55°C |
| CSM-400-1213-T | 10/100BaseT(X) to 100BaseFX slide-in management module converter, multi-mode ST connector, -40 to 75°C |
| CSM-400-1214 | 10/100BaseT(X) to 100BaseFX slide-in management module converter, multi-mode SC connector, -20 to 55°C |
| CSM-400-1214-T | 10/100BaseT(X) to 100BaseFX slide-in management module converter, multi-mode SC connector, -40 to 75°C |
| CSM-400-1218 | 10/100BaseT(X) to 100BaseFX slide-in management module converter, single-mode SC connector, -20 to 55°C |
| CSM-400-1218-T | 10/100BaseT(X) to 100BaseFX slide-in management module converter, single-mode SC connector, -40 to 75°C |
| CSM-400-1224 | 10/100BaseT(X) to 100BaseFX slide-in management module converter, WDM-A single-mode SC connector, -20 to 55°C |
| CSM-400-1224-T | 10/100BaseT(X) to 100BaseFX slide-in management module converter, WDM-A single-mode SC connector, -40 to 75°C |
| CSM-400-1225 | 10/100BaseT(X) to 100BaseFX slide-in management module converter, WDM-B single-mode SC connector, -20 to 55°C |
| CSM-400-1225-T | 10/100BaseT(X) to 100BaseFX slide-in management module converter, WDM-B single-mode SC connector, -40 to 75°C |
Application Note – Innovative Remote Management for Advanced Traffic Management System
In order to reduce or at least contain traffic congestion in urban environments, traffic authorities count on the Advanced Traffic Management System (ATMS) to control traffic flow. Advanced communication technologies ensure that the data that updates the status of traffic on various highways, intersections, bridges, and more, reaches the control room in real time. Learn more about how Moxa’s new media converter can help you centrally manage these large volumes of incoming data and remotely manage devices in the field.
Application Note – Innovative Remote Management for Passenger Information Systems
Passenger information systems (PIS) rely on large volumes of data collected from various points across a network to update passengers with up-to-the minute information. This data needs to be aggregated and managed in real time in the control room. Find out how Moxa’s new industrial media converter can help you centrally manage data and remotely manage devices in the field.
