Features and Benefits

  • 10/100 Mbps Ethernet interface
  • Up to 230.4 Kbps baudrate support
  • Choice of operation modes: Real COM, TCP Server, TCP Client, and UDP
  • DHCP, BootP, Static IP, and ARP supported
  • SNMP and e-mail alerts for event trapping and notification
  • Half the size of a credit card—only 57 × 40 mm
  • Low power consumption at 1.5W, with single +5V input

Overview

Moxa’s NE-4100 embedded device servers are designed formanufacturers who want to add sophisticated network connectivityto their serial devices. Moxa’s embedded device servers can be usedto convert any device with a standard serial interface to an Ethernet -enableddevice in no time. The NE-4100 embedded device servers support 10/100 Mbps Ethernet, and provide ready-to-use operationmodes, including TCP Server, TCP Client, and UDP. In addition, aReal COM driver is included for backward compatibility with legacysoftware.

• Form Factor
TypeDrop-in module
Dimensions45 × 36 mm (1.77 x 1.42 in)
WeightNE-4110S/4110A: 40 g
NE-4120S/4120A/4100T: 20 g
• Ethernet Interface
Number of Ports1
Speed10/100 Mbps, auto MDI/MDIX
Magnetic Isolation Protection1.5 kV built-in
Connector26-pin dual-in-line
• Serial Interface
Number of Ports2
Serial Standards• Port 1:TTL
• Port 2:TTL console port
RS-485 Data Direction ControlADDC® (automatic data direction control)
• Serial Communication Parameters
Data Bits5, 6, 7, 8
Stop Bits1, 1.5, 2
ParityNone, Even, Odd, Space, Mark
Flow ControlDSR/DTR and RTS/CTS (RS-232 only), XON/XOFF
Baudrate110 bps to 230.4 kbps
• Serial Signals
TTL• Port 1: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
• Port 2: TxD, RxD, GND
RS-232TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422Tx+, Tx-, Rx+, Rx-, GND
RS-485-4wTx+, Tx-, Rx+, Rx-, GND
RS-485-2wData+, Data-, GND
• Digital I/O Pins
GPIO4 programmable I/O pins
• Software
Network ProtocolsICMP, ARP, IPv4, TCP, UDP, DHCP, Telnet, HTTP, SNMP V1/V2c, SMTP
Configuration OptionsWeb Console, Serial Console, Telnet Console, Windows Utility
Windows Real COM DriversWindows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded
Fixed TTY DriversSCO Unix, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X
Linux Real TTY DriversLinux 2.4.x, 2.6.x, 3.x
Operation ModesReal COM, TCP Server, TCP Client, UDP
• Environmental Limits
Operating TemperatureStandard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature-40 to 60°C (-40 to 140°F)
Ambient Relative Humidity5 to 95% (non-condensing)
AltitudeUp to 2000 m
NotePlease contact Moxa if you require products guaranteed to function properly at higher altitudes.
• Power Requirements
Input Voltage5 VDC (±5%)
Power Consumption290 mA @ 5 VDC max.
• Standards and Certifications
EMCCE, FCC
EMIEN 55022 Class B, FCC Part 15 Subpart B Class A
EMSEN 55024,
EN 61000-4-2 (ESD),
EN 61000-4-3 (RS),
EN 61000-4-4 (EFT),
EN 61000-4-5 (Surge),
EN 61000-4-6 (CS),
EN 61000-4-8,
EN 61000-4-11
Green ProductRoHS, CRoHS, WEEE
• Reliability
Automatic Reboot TriggerBuilt-in WDT (watchdog timer)
MTBF (mean time between failures)288,173 hrs
• Warranty
Warranty Period5 years
DetailsSee www.moxa.com/warranty

Available Models

Model No.Description
NE-4100TDevice server module for TTL devices, supports 10/100BaseT(x) with DIL package
NE-4100T-TDevice server module for TTL devices, supports 10/100BaseT(x) with DIL package, -40 to 75°C operating temperature

SNMP and E-mail Alerts for Event Trap and Notification

NE-4100 embedded device servers can be configured to send an SNMP trap or e-mail under the following conditions:

  • Cold/warm start
  • Password authentication failure
  • Change in DSR/DCD line signal
  • Change in IP address
  • Change in password

Dimensions and Pin Assignment

backtotop
ne-4100t-safenergy-i-din-moxa-ti-vit-nam