MGate 5118 Series

1-port CAN-J1939 to Modbus/PROFINET/EtherNet/IP gateways

MGate 5118 Series

Features

  • Key-in-free J1939 command auto detection
  • Built-in J1939 traffic monitoring/diagnostics/live-list tools
  • Supports J1939 to Modbus RTU/ASCII/TCP, EtherNet/IP, PROFINET protocol conversion
  • Ready for hazardous locations: C1D2, ATEX, IECEx
  • MicroSD card for configuration backup/duplication, and event log
  • 2 kV CANbus and Modbus serial port isolation
  • -40 to 75°C wide operating temperature models available
  • IEC 62443-4-2 compliant 


Overview

The MGate 5118 series industrial protocol gateways support the SAE J1939 protocol, which is based on CANBus (Controller Area Network). SAE J1939 is used to implement communication and diagnostics among vehicle components, diesel engine generators, and compression engines, and is suitable for the heavy duty truck industry and backup power systems. It is now common to use an engine control unit (ECU) to control these kinds of devices, and more and more applications are using PLCs for process automation to monitor the status of J1939 devices connected behind the ECU.

The MGate 5118 series gateways support the Modbus RTU/ASCII/ TCP, EtherNet/IP, and PROFINET protocols to support most PLC applications. Devices that support the J1939 protocol can be monitored and controlled by PLCs and SCADA systems that use the Modbus RTU/ASCII/TCP, EtherNet/IP, and PROFINET protocols. With the MGate 5118, you can use the same gateway in a variety of PLC environments

• Industrial Protocols
ProtocolsSAE J1939, Modbus RTU/ASCII/TCP, PROFINET, EtherNet/IP
Protocol Conversion• J1939 to Modbus RTU/ASCII (Master/Slave)
• J1939 to Modbus TCP (Client/Server)
• J1939 to EtherNet/IP (Scanner/Adapter)
• J1939 to PROFINET (I/O Device)
• Ethernet Interface
ProtocolsModbus TCP (Client/Server), PROFINET (I/O device), EtherNet/IP (Scanner/Adapter)
Number of Ports2 (1 IP address, supports Ethernet cascading)
Speed10/100 Mbps, Auto MDI/MDIX
Connector8-pin RJ45
Magnetic Isolation Protection1.5 kV (built-in)
• CAN-J1939 Serial Interface
ProtocolsSAE J1939
Number of Ports1
Connectors6-pin terminal block
Terminator120 Ω
Isolation2 kv (built-in)
Data Rate250 kbps and 500 kbps
• Modbus Serial Interface
ProtocolsModbus RTU/ASCII (Master/Slave)
Number of Ports1
Serial StandardsRS-232/422/485, software selectable
ConnectorsDB9 male
Pull High/Low Resistor for RS-4851 kΩ, 150 kΩ
Terminator for RS-485120 Ω
Isolation2 kV (built-in)
• Modbus Serial Communication Parameters
Data Bits8
Stop Bits1, 2
ParityNone, Even, Odd, Space, Mark
Flow ControlRTS/CTS, RTS Toggle
Baudrate50 bps to 921.6 kbps
• Modbus Serial Signals
RS-232TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422Tx+, Tx-, Rx+, Rx-, GND
RS-485-4wTx+, Tx-, Rx+, Rx-, GND
RS-485-2wData+, Data-, GND
• Software
Configuration OptionsWeb console
UtilityDevice Search Utility (DSU) for Windows 95, 98, ME, NT, 2000, Windows XP, Server 2003, Vista, Server 2008 (x86/x64), Windows Server 2008 R2, Windows 7/8/8.1/10 (x86/x64), Windows Server 2012 (x64), Windows 2012 R2
Network ProtocolsTCP/IP, UDP, HTTP, SMTP, NTP, DNS, DHCP Client, SNMP (v1, v2, v3), MIB-II, ARP, Telnet
SupportMXview, MXconfig, IEC 62443-4-2
• Physical Characteristics
HousingMetal, IP30
Weight589 g (1.30 lb)
Dimensions45.8 x 105 x 134 mm (1.8 x 4.13 x 5.28 in)
• Environmental Limits
Operating TemperatureStandard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity5 to 95% (non-condensing)
VibrationIEC 60068-2-6, IEC 60068-2-64
ShockIEC 60068-2-27
DropIEC 60068-2-32
• Power Requirements
Input Voltage12 to 48 VDC
Input Current• 416 mA @ 12 VDC
• 195 mA @ 24 VDC;
• 110 mA @ 48 VDC
Power ConnectorTerminal block
• Standards and Certifications
SafetyEN 60950-1(LVD), UL 61010-2-201
Hazardous LocationClass I Division 2, ATEX, IECEx (Note: Certification is underway. Please contact a Moxa slaes representative for details.)
EMCEN 61000-6-2/6-4
EMICISPR 22, FCC Part 15B Class B
EMSIEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
IEC 61000-4-5 Surge: Power 1 kV; Signal: 1 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF: 10 A/m
• Reliability
Alarm FunctionsRelay, email, SNMP trap
Alert ToolsBuilt-in buzzer
Storage Card Slot1 microSD (SDHC) card slot; supports up to 32 GB
• MTBF (mean time between failures)
Time727,873 hrs
StandardTelcordia SR332

Available Models

 Model No.Description
MGate 51181-port J1939 to Modbus/PROFINET/EtherNet/IP gateway, 0 to 60°C operating temperature
MGate 5118-T1-port J1939 to Modbus/PROFINET/EtherNet/IP gateway, -40 to 75°C operating temperature

Optional Accessories

Wireless AP Mounting Kit

 Model No.Description
WK-51-01Wall-mounting kit, 51mm wide

Connectors

 Model No.Description
Mini DB9F-to-TBDB9 Female to Terminal Block connector

backtotop
mgate-5118-series-safenergy-i-din-moxa-ti-vit-nam