ioPAC 8500 Series Expansion Modules

Rugged modular RTU controllers

Category: Modular Programmable Controller

ioPAC 8500 Series Datasheet

ioPAC 8500 Hardware User’s Manual

Description Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
Thông số Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
Ordering Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
Tài liệu Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering

Features and Benefits

85M-1602-T: 16 digital inputs, 24 VDC, sink/source type
85M-2600-T: 16 digital outputs, 24 VDC, sink-type
85M-3800-T: 8 analog inputs, 4 to 20 mA
85M-3810-T: 8 analog inputs, 0 to 10 VDC
85M-3801-T: 8 analog inputs, 4 to 20 mA, 40 kHz
85M-3811-T: 8 analog inputs, 0 to 10 VDC, 40 kHz
85M-5401-T: 4 serial ports (RS-232/422/485)
85M-6600-T: 6 RTDs

Introduction

Moxa’s 85M series modules can be installed in both ioPAC 8500 and ioPAC 8600 systems. Modules are available with DI/Os, AIs, Fast AIs, and serial interfaces, giving users a wide choice of options to choose from. Enough options are available to allow users to select the best I/O combination for their target application. All 85M modules are designed for railway industry applications, and as such are compliant with EN 50121-3-2, EN 50121-4, and EN 50155. In addition, the modules support a wide operating temperature range of -40 to 75°C.

85M-1602-T Specifications
• Inputs and Outputs
Digital Inputs	16 channels
Isolation	3k VDC or 2k Vrms
• Digital Input
Sensor Type	Wet contact (NPN or PNP), dry contact
I/O Mode	DI, Counter or Frequncy
Dry Contact	• On: short to GND • Off: open
Wet Contact (DI to COM)	• Off: 0 to 3 VDC • On: 10 to 30 VDC
Common Type	8 points per COM
Counter Frequency	5 kHz
Digital Filtering Time Interval	Software selectable (by 0.1 ms)
• Physical Characteristics
Wiring	I/O cable, 16 AWG (max.)
Connector	Spring-type terminal block
• Environmental Limits
Operating Temperature	-40 to 75°C (-40 to 176°F)
• Power Requirements
Input Current	363.6 mA @ 3.3 VDC
• MTBF (mean time between failures)
Time	1,132,561 hrs
Standard	Telcordia SR332

85M-2600-T Specifications
• Inputs and Outputs
Digital Outputs	16 channels
Isolation	3k VDC or 2k Vrms
• Digital Output
Type	Sink
I/O Mode	DO or PWM
Pulse Output Frequency	5 kHz
Over-Voltage Protection	45 VDC
Over-Current Protection	2.6 A (4 channels @ 650 mA)
Over-Temperature Shutdown	175°C (typical), 150°C (min.)
Current Rating	200 mA per channel
• Physical Characteristics
Wiring	I/O cable, 16 AWG (max.)
Connector	Spring-type terminal block
• Environmental Limits
Operating Temperature	-40 to 75°C (-40 to 176°F)
• Power Requirements
Input Current	257.6 mA @ 3.3 VDC
• MTBF (mean time between failures)
Time	792,571 hrs
Standard	Telcordia SR332

85M-3800-T Specifications
• Inputs and Outputs
Analog Inputs	8 channels
Isolation	3k VDC or 2k Vrms
• Analog Input
Type	Differential
Resolution	16 bits
I/O Mode	4 to 20 mA (wire off)
Accuracy	±0.1% FSR @ 25°C ±0.3% FSR @ -40 and 75°C
Sampling Rate	• All channels: 100 samples/sec • Per channel: 12.5 samples/sec
Input Impedance	125 ohms (min.)
• Physical Characteristics
Wiring	I/O cable, 16 AWG (max.)
Connector	Spring-type terminal block
• Environmental Limits
Operating Temperature	-40 to 75°C (-40 to 176°F)
• Power Requirements
Input Current	318.2 mA @ 3.3 VDC
• MTBF (mean time between failures)
Time	1,512,906 hrs
Standard	Telcordia SR332

85M-3810-T Specifications
• Inputs and Outputs
Analog Inputs	8 channels
Isolation	3k VDC or 2k Vrms
• Analog Inputs
Type	Differential
Resolution	16 bits
I/O Mode	0 to 10 VDC
Accuracy	±0.1% FSR @ 25°C ±0.3% FSR @ -40 and 75°C
Sampling Rate	• All channels: 100 samples/sec • Per channel: 12.5 samples/sec
Input Impedance	200 kilo-ohms (min.)
• Physical Characteristics
Wiring	I/O cable, 16 AWG (max.)
Connector	Spring-type terminal block
• Environmental Limits
Operating Temperature	-40 to 75°C (-40 to 176°F)
• Power Requirements
Input Current	315.2 mA @ 3.3 VDC
• MTBF (mean time between failures)
Time	1,530,690 hrs
Standard	Telcordia SR332

85M-3801-T Specifications
• Inputs and Outputs
Analog Inputs	8 channels
Isolation	3k VDC or 2k Vrms
• Analog Input
Type	Differential
Resolution	16 bits
I/O Mode	4 to 20 mA (wire off)
Historical Data Buffering	60 KB per channel, 6-second data buffer at 5 kHz
Accuracy	±0.1% FSR @ 25°C ±0.3% FSR @ -40 and 75°C
Sampling Rate	• All channels: 40k samples/sec • Per channel: 5k samples/sec
Input Impedance	125 ohms (min.)
• Physical Characteristics
Wiring	I/O cable, 16 AWG (max.)
Connector	Spring-type terminal block
• Environmental Limits
Operating Temperature	-40 to 75°C (-40 to 176°F)
• Power Requirements
Input Current	378.8 mA @ 3.3 VDC
• MTBF (mean time between failures)
Time	1,426,112 hrs
Standard	Telcordia SR332

85M-3811-T Specifications
• Inputs and Outputs
Analog Inputs	8 channels
Isolation	3k VDC or 2k Vrms
• Analog Inputs
Type	Differential
Resolution	16 bits
I/O Mode	0 to 10 VDC
Historical Data Buffering	60 KB per channel, 6-second data buffer at 5 kHz
Accuracy	±0.1% FSR @ 25°C ±0.3% FSR @ -40 and 75°C
Sampling Rate	• All channels: 40k samples/sec • Per channel: 5k samples/sec
Input Impedance	20 mega-ohms (min.)
• Physical Characteristics
Wiring	I/O cable, 16 AWG (max.)
Connector	Spring-type terminal block
• Environmental Limits
Operating Temperature	-40 to 75°C (-40 to 176°F)
• Power Requirements
Input Current	378.8 mA @ 3.3 VDC
• MTBF (mean time between failures)
Time	1,426,112 hrs
Standard	Telcordia SR332

85M-6600-T Specifications
• Inputs and Outputs
RTD Inputs	6 channels
Isolation	3k VDC or 2k Vrms
• RTDs
Input Type	• PT50, PT100, PT200, PT500 (-200 to 850°C) • PT1000 (-200 to 350°C) • JPT100, JPT200, JPT500 (-200 to 640°C) • JPT1000 (-200 to 350°C) • NI100, NI200, NI500 (-60 to 250°C) • NI1000 (-60 to 150°C) • NI120 (-80 to 260°C) • Resistance of 310, 620
Sampling Rate (single channel)	• All channels: 12 samples/sec • Per channel: 2 samples/sec
Resolution	0.1°C or 0.1 ohms
Accuracy	±0.1% FSR @ 25°C ±0.3% FSR @ -40 and 75°C
Input Impedance	625 kilo-ohms (min.)
Wiring	I/O cable, 16 AWG (max.)
Connector	Spring-type terminal block
• Environmental Limits
Operating Temperature	-40 to 75°C (-40 to 176°F)
• Power Requirements
Input Current	201.5 mA @ 3.3 VDC
• MTBF (mean time between failures)
Time	571,446 hrs
Standard	Telcordia SR332

85M-6810-T Specifications
• Inputs and Outputs
Analog Inputs	8 channels
Isolation	3k VDC or 2k Vrms
• Thermocouples
Sensor Type	J (0 to 750°C), K (-200 to 1250°C), T (-200 to 350°C), E (-200 to 900°C), R (-50 to 1600°C), S (-50 to 1760°C), B (600 to 1700°C), N (-200 to 1300°C)
Millivolt Type	• Mode: ±78.126 mV, ±39.062 mV, ±19.532 mV • Fault and over-voltage protection: -35 to +35 VDC (power off); -25 to +30 VDC (power on)
Sampling Rate (single channel)	• All channels: 12 samples/sec • Per channel: 1.5 samples/sec
Resolution	16 bits
Accuracy	±0.1% FSR @ 25°C ±0.3% FSR @ -40 and 75°C
Input Impedance	1 mega-ohm (min.)
Wiring	I/O cable, 16 AWG (max.)
Connector	Spring-type terminal block
• Environmental Limits
Operating Temperature	-40 to 75°C (-40 to 176°F)
• Power Requirements
Input Current	175.5 mA @ 3.3 VDC
• MTBF (mean time between failures)
Time	2,324,891 hrs
Standard	Telcordia SR332

85M-5401-T Specifications
• Serial Communication
Interface	4 RS-232/422/485 ports, software selectable (DB44 female)
Isolation	3k VDC or 2k Vrms Note: DB44 to 4-port DB9 cable included in the package.
• Serial Communication Parameters
Parity	None, Even, Odd
Data Bits	7, 8
Stop Bits	1, 2
Flow Control	RTS/CTS, XON/XOFF
Baudrate	300 bps to 921.6 kbps
• Serial Signals
RS-232	TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422	Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w	Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w	Data+, Data-, GND
• Physical Characteristics
Connector	DB44 female
• Environmental Limits
Operating Temperature	-40 to 75°C (-40 to 176°F)
• Power Requirements
Input Current	375.8 mA @ 3.3 VDC
• MTBF (mean time between failures)
Time	596,611 hrs
Standard	Telcordia SR332

Common Specifications
• Power Requirements
Input Voltage	24 VDC (9 to 48 VDC)
• Environmental Limits
Storage Temperature	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)
Shock	IEC 60068-2-27
Vibration	IEC 60068-2-6
• Standards and Certifications
Safety	UL 508
EMC	EN 55032/24
EMI	FCC Part 15 Subpart B Class A, CISPR 32
EMS	IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1000 MHz: 3 V/m 1400 MHz to 2100 MHz: 3 V/m 2100 MHz to 2700 MHz: 1 V/m IEC 61000-4-4 EFT: Power: 1 kV; Signal 0.5 kV IEC 61000-4-5 Surge: Power: 2 kV (L-PE), 1 kV (L-L);
Rail Traffic	EN 50155, EN 50121-3-2, EN 50121-4 Complies with a portion of EN 50155 specifications.
• Warranty
Warranty Period	5 years
Details	See www.moxa.com/warranty

Available Models

	Model No.	Description
	85M-1602-T	ioPAC 8500 I/O module with 16 DIs, 24 VDC sink/source type, -40 to 75°C operating temperature
	85M-2600-T	ioPAC 8500 I/O module with 16 DOs, 24 VDC sink type, -40 to 75°C operating temperature
	85M-3800-T	ioPAC 8500 I/O module with 8 AIs, 4 to 20 mA, -40 to 75°C operating temperature
	85M-3810-T	ioPAC 8500 I/O module with 8 AIs, 0 to 10 V, -40 to 75°C operating temperature
	85M-3801-T	ioPAC 8500 I/O module with 8 AIs, 4 to 20 mA, 40 kHz, -40 to 75°C operating temperature
	85M-3811-T	ioPAC 8500 I/O module with 8 AIs, 0 to 10 V, 40 kHz, -40 to 75°C operating temperature
	85M-6600-T	ioPAC 8500 I/O module with 6 RTDs, -40 to 75°C operating temperature
	85M-6810-T	ioPAC 8500 I/O module with 8 TCs, -40 to 75°C operating temperature
	85M-5401-T	ioPAC 8500 communication module with 4-port Serial, DB44 connectors, -40 to 75°C operating temperature

Fast Track Integration for Wayside Condition Monitoring and Preventive Maintenace

This white paper will discuss how railway operators are adopting increasingly sophisticated condition-based maintenance regimes to control costs and improve track performance, some of the key difficulties system integrators need to overcome when deploying wayside condition monitoring systems for railway preventive maintenance, and how using a single condition monitoring platform can save time and costs for deployment and maintenance.

Railway Preventive Maintenance Solutions Flyer

See how Moxa’s ioPAC 8500 RTU controllers make railway preventive maintenance easy. The RTUs provide extremely accurate data, giving engineers the information they need to identify anomalous conditions, before failures occur. The ioPAC 8500 RTUs are also designed to work reliably in harsh environments, and modules can be easily replaced to shorten system downtime.