EDS-P506A-4PoE Series

6-port managed Ethernet switches with 4 IEEE 802.3af/at PoE+ ports

switch-cong-nghiep-6-cong-managed-4-cong-PoE

Features and Benefits 

  • 4 IEEE 802.3af/at compliant PoE and Ethernet combo ports
  • Up to 30 watts per PoE port
  • 24/48 VDC wide range redundant power inputs
  • Advanced PoE management functions, including PD failure check and PoE scheduling
  • Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), RSTP/STP, and MSTP for network redundancy
  • -40 to 75°C operating temperature range (T models)
  • Supports MXstudio for easy, visualized industrial network management

Introduction

The EDS-P506A-4PoE series managed redundant Ethernet switches come standard with 4 10/100BaseT(X) 802.3at (PoE+) and 802.3af (PoE) compliant Ethernet ports and 2 10/100BaseT(X) or 2 10/100BaseFX Ethernet ports. The EDS-P506A-4PoE switches provide up to 30 watts of power per PoE port, and allow power to be supplied to connected high-power devices when AC power is not readily available or is cost-prohibitive to provide locally. The EDS-P506A-4PoE series is designed especially for security automation applications such as IP surveillance, and gate of entry systems, which can benefit from a scalable backbone construction and Power-over-Ethernet support.

• Technology
StandardsIEEE 802.3af/at for Power-over-Ethernet
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3x for Flow Control
IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1s for Multiple Spanning Tree Protocol
IEEE 802.1Q for VLAN Tagging
IEEE 802.1p for Class of Service
IEEE 802.1X for Authentication
IEEE 802.3ad for Port Trunk with LACP
• Software Features
ManagementIPv4/IPv6, SNMP v1/v2c/v3, LLDP, Port Mirror, DDM, RMON, DHCP Server/Client, DHCP Option 66/67/82, BootP, TFTP, SMTP, RARP, Telnet, Syslog, SNMP Inform, Flow Control, Back Pressure Flow Control
Filter802.1Q VLAN, Port-Based VLAN, GVRP, IGMP v1/v2, GMRP
Redundancy ProtocolsSTP, RSTP, MSTP, Turbo Ring v1/v2, Turbo Chain, Link Aggregation
SecurityRADIUS, TACACS+, SSL, SSH, Port Lock
Time ManagementSNTP, NTP Server/Client, IEEE 1588v2 PTP (software-based)
Industrial ProtocolsEtherNet/IP, Modbus/TCP
MIBMIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9
• Switch Properties
Priority Queues4
Max. Number of VLANs64
VLAN ID RangeVID 1 to 4094
IGMP Groups256
MAC Table Size8 K
Packet Buffer Size1 Mbit
• Interface
RJ45 Ports10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection
Fiber Ports100BaseFX ports (SC/ST connector)
Console PortRS-232 (RJ45 connector)
PoE PinoutV+, V+, V-, V- for pin 1, 2, 3, 6 (Endspan, MDI Alternative A)
DIP SwitchesTurbo Ring, Master, Coupler, Reserve
Alarm Contact2 relay outputs with current carrying capacity of 1 A @ 24 VDC
Digital Inputs2 inputs with the same ground, but electrically isolated from the electronics.
• +13 to +30 V for state “1”
• -30 to +3 V for state “0”
• Max. input current: 8 mA
• Optical Fiber
• Power Requirements
Input Voltage24/48 VDC, redundant dual inputs
Operating Voltage22 to 57 VDC
Input Current5.72 A @ 24 VDC
Connection2 removable 6-contact terminal blocks
Reverse Polarity ProtectionPresent
Power ConsumptionMax. 17.28 W full loading without PDs’ consumption
Power BudgetMax. 120 W for total PDs’ consumptionMax. 30 W for each PoE port
• Physical Characteristics
HousingMetal
IP RatingIP30 protection
Dimensions80 x 135 x 131.5 mm (3.15 x 5.31 x 5.18 in)
Weight1270 g (2.80 lb)
InstallationDIN-rail mounting, wall mounting (with optional kit)
• Environmental Limits
Operating TemperatureStandard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity5 to 95% (non-condensing)
• Standards and Certifications
SafetyUL 508
EMCEN 55032/24
EMICISPR 32, FCC Part 15B Class A
EMSIEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
IEC 61000-4-6 CS: Signal: 10 V
IEC 61000-4-8
Rail TrafficEN 50121-4
ShockIEC 60068-2-27
FreefallIEC 60068-2-32
VibrationIEC 60068-2-6 
Note: Please check Moxa’s website for the most up-to-date certification status.
• MTBF (mean time between failures)
Time433,000 hrs
StandardTelcordia (Bellcore), GB

Available Models

 Model No.Description
EDS-P506A-4PoEPoE+ managed Ethernet switch with 4 PoE+ 10/100BaseT(X) ports and 2 10/100BaseT(X) ports, 0 to 60°C operating temperature
EDS-P506A-4PoE-MM-SCPoE+ managed Ethernet switch with 4 PoE+ 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with SC connector, 0 to 60°C operating temperature
EDS-P506A-4PoE-MM-SC-TPoE+ managed Ethernet switch with 4 PoE+ 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with SC connector, -40 to 75°C operating temperature
EDS-P506A-4PoE-MM-STPoE+ managed Ethernet switch with 4 PoE+ 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with ST connector, 0 to 60°C operating temperature
EDS-P506A-4PoE-MM-ST-TPoE+ managed Ethernet switch with 4 PoE+ 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with ST connector, -40 to 75°C operating temperature
EDS-P506A-4PoE-SS-SCPoE+ managed Ethernet switch with 4 PoE+ 10/100BaseT(X) ports, and 2 100BaseFX single-mode ports with SC connector, 0 to 60°C operating temperature
EDS-P506A-4PoE-SS-SC-TPoE+ managed Ethernet switch with 4 PoE+ 10/100BaseT(X) ports, and 2 100BaseFX single-mode ports with SC connector, -40 to 75°C operating temperature
EDS-P506A-4PoE-TPoE+ managed Ethernet switch with 4 PoE+ 10/100BaseT(X) ports and 2 10/100BaseT(X) ports, -40 to 75°C operating temperature

Optional Accessories

DIN Rail Power Supplies

 Model No.Description
DRP-240-48240W/5A DIN-Rail 48 VDC power supply with universal 85 to 264 VAC input or 120-370 VDC, -10~70°C operating temperature
DR-75-4875W/1.6A DIN-Rail 48 VDC power supply with universal 85 to 264 VAC or 120-370 VDC input, -10 to 60°C operating temperature
DR-75-2475W/3.2A DIN-rail 24 VDC power supply with universal 85 to 264 VAC or 120-370 VDC input, -10 to 60°C operating temperature
DR-120-48120W/2.5A DIN-Rail 48 VDC power supply with universal 88 to 132 VAC or 176 to 264 VAC input by switch, or 248-370 VDC, -10 to 60°C operating temperature
DR-120-24120W/5A DIN-rail 24 VDC power supply with universal 88 to 132 VAC or 176 to 264 VAC input by switch, or 248-370 VDC , -10 to 60°C operating temperature

PoE Splitters & Injectors

 Model No.Description
SPL-24PoE splitters
INJ-24AGigabit high power IEEE 802.3af/at PoE+ injectors
INJ-24Gigabit IEEE 802.3af/at PoE+ injectors

Trial Software

 Model No.Description
MXviewIndustrial network management software designed for converged automation networks
MXconfigIndustrial network configuration tool

Brochure

Optimize Your Network Infrastructure for More Industrial IoT Opportunities

While the Industrial Internet of Things (IIoT) with its wave of innovation ushers in immense opportunities for businesses, it also opens the door to new threats. The underlying network infrastructure, therefore, must overcome this ever-growing number of challenges to sustain truly reliable connectivity. This brochure will introduce how Moxa helps its customers and partners optimize industrial network infrastructure to achieve operational efficiency, availability and reliability in various industrial environments

INI_brochure

backtotop
eds-p506a-4poe-series-safenergy-i-din-moxa-ti-vit-nam