EDS-G205A-4PoE Series

5-port full Gigabit unmanaged Ethernet switches with 4 IEEE 802.3af/at PoE+ ports

switch-cong-nghiep-unmanaged-5-cong-giga-5-cong-PoE-IEEE

Features and Benefits 

  • Full Gigabit Ethernet ports
  • IEEE 802.3af/at, PoE+ standards
  • Up to 36 watts output per PoE port
  • 12/24/48 VDC flexible redundant power inputs
  • Supports 9.6 KB jumbo frames
  • Intelligent power consumption detection and classification
  • Smart PoE over current and short circuit protection
  • -40 to 75°C operating temperature range (T models)

Introduction

The EDS-G205A-4PoE switches are smart, 5-port, unmanaged full Gigabit Ethernet switches supporting Power-over-Ethernet on ports 2 to 5. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-G205A-4PoE switches enable centralization of the power supply, providing up to 36 watts of power per port and reducing the effort needed for installing power. The switches can be used to power IEEE 802.3af/at standard devices (PD), eliminating the need for additional wiring, and they support IEEE 802.3/802.3u/802.3x with 10/100/1000M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical high-bandwidth solution for your industrial Ethernet network.

• Technology
StandardsIEEE 802.3af/at for Power-over-Ethernet
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000BaseT
IEEE 802.3z for 1000BaseX
IEEE 802.3x for Flow Control
Processing TypeStore and Forward
• Switch Properties
MAC Table Size8 K
Packet Buffer Size1 Mbit
Jumbo Frame Size10 KB
• Interface
RJ45 Ports10/100/1000BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection
Fiber Ports100/1000BaseSFP slot
PoE PinoutV+, V+, V-, V- for pins 1,2,3,6 (Endspan, MDI Alternative A)
• Power Requirements
Input Voltage12/24/48 VDC, redundant dual inputs
Operating Voltage12 to 57 VDC
Input Current5.65 A @ 24 VDC
Overload Current ProtectionPresent
Connection2 removable 2-contact terminal blocks
Reverse Polarity ProtectionPresent
Power ConsumptionMax. 11.73 W full loading without PDs’ consumption
Power BudgetMax. 62 W at 12 VDC, 120 W at 24 VDC, and 144 W at 48 VDC for total PDs’ consumption,Max. 36 W for each PoE port
• Physical Characteristics
HousingMetal
IP RatingIP30 protection
Dimensions29 x 135 x 105 mm (1.14 x 5.31 x 4.13 in)
Weight300 g (0.66 lb)
InstallationDIN-rail mounting, wall mounting (with optional kit)
• Environmental Limits
Operating TemperatureStandard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity5 to 95% (non-condensing)
• Standards and Certifications
NotePlease check Moxa’s website for the most up-to-date certification status.
SafetyUL 508
EMCEN 55032/24
EMICISPR 32, FCC Part 15B Class A
EMSIEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8
Rail TrafficEN 50121-4
ShockIEC 60068-2-27
FreefallIEC 60068-2-32
VibrationIEC 60068-2-6
• MTBF (mean time between failures)
Time1,257,910 hrs
StandardTelcordia (Bellcore), GB

Available Models

 Model No.Description
EDS-G205A-4PoEUnmanaged Ethernet switch with 1 10/100/1000BaseT port and 4 PoE/PoE+ ports, 0 to 60°C operating temperature
EDS-G205A-4PoE-TUnmanaged Ethernet switch with 1 10/100/1000BaseT port and 4 PoE/PoE+ ports, -40 to 75°C operating temperature
EDS-G205A-4PoE-1GSFPUnmanaged Ethernet switch with 1 1000Base-X port and 4 10/100/1000BaseT PoE/PoE+ ports, 0 to 60°C operating temperature
EDS-G205A-4PoE-1GSFP-TUnmanaged Ethernet switch with 1 1000Base-X port and 4 10/100/1000BaseT PoE/PoE+ ports, -40 to 75°C operating temperature

Optional Accessories

PoE Splitters & Injectors

 Model No.Description
SPL-24PoE splitters
INJ-24AGigabit high power IEEE 802.3af/at PoE+ injectors
INJ-24Gigabit IEEE 802.3af/at PoE+ injectors

FAQ: Is Your Network Infrastructure Ready for the IIoT?

The Industrial Internet of Things (IIoT) trend aims to improve efficiency and productivity by connecting different devices together as well as collecting and analyzing large volumes of data to offer accurate information. However, before reaping the benefits of the IIoT, users need to ensure that the correct infrastructure is in place. To make sure your network is ready for the IIoT, check out five of the most frequently mentioned questions.

FAQ_cover
2015 Industrial Ethernet Solutions Brochure

Build SMART Connectivity to Boost Your Industrial IoT Opportunities

The Industrial Internet of Things is evolving to achieve all kinds of information automation. Staying ahead of the curve leads to increased productivity, which crucially depends on high efficiency and availability of network connectivity. Moxa’s comprehensive product portfolio goes beyond meeting stringent industrial Ethernet standards, bringing vertical expertise to around-the-clock Industrial IoT operations around the world.

Check out this 24-page IES Brochure to get detailed information of the following products and solutions:
– Automation-Friendly Network Management Suite
– NAT/VPN/Firewall Secure Routers
– Industrial Ethernet Switches
– Industrial Wireless Connectivity
– Industrial Ethernet Gateways
– Field Networking and Automation Solutions

Download IES 2015 Brochure!
PoE Application Portfolio

This guidebook presents 10 different case studies of how advanced networks are taking advantage of the latest developments in PoE technology.

Download Industrial PoE Application Portfolio

backtotop
eds-g205a-4poe-series-safenergy-i-din-moxa-ti-vit-nam