EDR-810 Series

8+2G multiport industrial secure router with switch/firewall/NAT/VPN

EDR 810 Series

Features and Benefits

  • 8+2G all-in-one firewall/NAT/VPN/router/switch
  • Build up secure remote access tunnel with VPN
  • Protect critical assets by stateful firewall
  • Inspect industrial protocol with PacketGuard technology
  • Easy network setup with network address translation (NAT)
  • RSTP/Turbo Ring redundant protocol enhances network redundancy
  • -40 to 75°C operating temperature range (T model)
  • ISA99 / IEC 62443 / NERC CIP compliance
  • Check firewall settings with intelligent SettingCheck feature 

Introduction

The EDR-810 is a highly integrated industrial multiport secure router with firewall/NAT/VPN and managed Layer 2 switch functions. It is designed for Ethernet-based security applications in sensitive remote control or monitoring networks, and it provides an electronic security perimeter for the protection of critical cyber assets such as pumping/ treatment systems in water stations, DCS systems in oil and gas applications, and PLC/SCADA systems in factory automation. The EDS-810 series includes the following cybersecurity features:

  • Firewall/NAT: Firewall policies control network traffic between different trust zones, and Network Address Translation (NAT) shields the internal LAN from unauthorized activity by outside hosts.
  • VPN: Virtual Private Networking (VPN) is designed to provide users with secure communication tunnels when accessing a private network from the public Internet. VPNs use IPSec (IP Security) server or client mode for encryption and authentication of all IP packets at the network layer to ensure confidentiality and sender authentication.

The EDR-810’s “WAN Routing Quick Setting” provides an easy way for users to set up WAN and LAN ports to create a routing function in four steps. In addition, the EDR-810’s “Quick Automation Profile” gives engineers a simple way to configure the firewall filtering function with general automation protocols, including EtherNet/IP, Modbus TCP, EtherCAT, FOUNDATION Fieldbus, and PROFINET. Users can easily create a secure Ethernet network from a user-friendly web UI with a single click, and the EDR-810 is capable of performing deep Modbus TCP packet inspection. Wide temperature range models that operate reliably in hazardous, -40 to 75°C environments are also available.

• Technology
StandardsIEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3z for 1000BaseX
IEEE 802.1Q for VLAN tagging
IEEE 802.3ad for port trunk
ProtocolsSNMP v1/v2c/v3, DHCP server/client, TFTP, NTP/SNTP server/client, HTTP, HTTPS, Telnet, SSH, IPSec, L2TP, IGMP v1/v2/v3, QoS/CoS/ToS, Radius, RSTP/STP, LLDP, DDNS, Proxy ARP
RoutingStatic routing, RIP V1/V2, OSPFThroughput: 10000 packets per second (max. 100 Mbps)
Routing RedundancyVRRP
Multicast RoutingStatic, DVMRP, PIM-SM/SSM
Broadcast ForwardingIP directed broadcast, broadcast forwarding
RedundancySTP/RSTP, Turbo Ring V2, Ring Coupling, and Dual Homing
Flow ControlIEEE 802.3x flow control, back pressure flow control
• Security Functions
FirewallFeatures:
• Stateful inspection
• Router firewall and transparent (bridge) firewall
• Filter: IP and MAC address, ports, ICMP, DDoS, Ethernet protocols
• Deep Packet Inspection: Modbus TCP/UDP
• Quick Automation Profiles: EtherCAT, EtherNet/IP, F
DoS and DDoS ProtectionNull Scan, Xmas Scan, NMAP-Xmas Scan, SYN/FIN Scan, FIN Scan, NMAP-ID Scan, SYN/RST Scan, NEW-Without-SYN Scan, ICMP-Death, SYN-Flood, ARP-Flood
NATN-to-1, 1-to-1, bidirectional 1-to-1, and port forwarding
IPSec VPNProtocols:
• IPSec
• L2TP (server)
• PPTP (client)
Encryption:
• DES, 3DES, AES-128, AES-192, AES-256
Authentication:
• RSA (key size: 1024-bit, 2048-bit)
• X.509 v3 certificate
• MD5 and SHA (SHA-256)
Throughput:
• Max. 17 Mbps (Conditions: AES
OpenVPNProtocols:
• OpenVPN (client and server), UDP and TCP
• Tunnel mode (routing) and TAP mode (bridge)
Encryption:
• Blowfish CBC, DES CBC, DES-EDE3 CBC, AES-128/192/256 CBC
Authentication:
• User password by MD5 and SHA1
Throughput:
• Max. 5 Mbps
Co
Real-Time Firewall / VPN Event Log• Event Type: Firewall Event, VPN Event, System Security Event
• Media: Local storage, Syslog server, and SNMP trap
• Switch Properties
Max. Number of VLANs16
VLAN ID Range1 to 4094
IGMP Groups256
• Interface
RJ45 Ports10/100BaseT(X) auto negotiation speed
Fiber Ports1000BaseSFP slot
Console PortWeb/Telnet/SSH/CLI, and RS-232 serial console
RESET buttonReset to default settings
LED IndicatorsSTATE, PWR1, PWR2, FAULT, 10/100/1000M
Alarm ContactOne relay output with current-carrying capacity of 1 A @ 24 VDC
Digital Inputs1 2-contact terminal block• +13 to +30 V for state “1”
• -30 to +3 V for state “0”
• Max. input current: 8 mA
• Power Requirements
Input Voltage12/24/48 VDC, redundant dual inputs
Input Current0.32 A @ 24 V
Overload Current ProtectionPresent
ConnectionRemovable terminal block
Reverse Polarity ProtectionPresent
• Physical Characteristics
HousingMetal
Dimensions53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in)
Weight830 g (2.10 lb)
InstallationDIN-rail mounting, wall mounting (with optional kit)
• Environmental Limits
Operating TemperatureStandard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity5 to 95% (non-condensing)
• Standards and Certifications
SafetyUL 508
EMCEN 55032/24
Hazardous LocationUL/cUL Class I Division 2 Groups A/B/C/D
EMICISPR 32, FCC Part 15B Class A
EMSIEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
IEC 61000-4-6 CS: Signal: 10 V
IEC 61000-4-8
Rail TrafficEN 50121-4
TransportationNEMA TS2
ShockIEC 60068-2-27
FreefallIEC 60068-2-32
VibrationIEC 60068-2-6
• MTBF (mean time between failures)
Time981,954 hrs
StandardTelcordia (Bellcore), GB

Available Models

 Model No.Description
EDR-810-2GSFP8+2G SFP industrial multiport secure router with Firewall/NAT, -10 to 60°C operating temperature
EDR-810-2GSFP-T8+2G SFP industrial multiport secure router with Firewall/NAT, -40 to 75°C operating temperature
EDR-810-VPN-2GSFP8+2G SFP industrial multiport secure router with Firewall/NAT/VPN, -10 to 60°C operating temperature
EDR-810-VPN-2GSFP-T8+2G SFP industrial multiport secure router with Firewall/NAT/VPN, -40 to 75°C operating temperature

Compatible Modules

SFP-1G Series

 Model No.Description
SFP-1G10ALCWDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 10 km transmission; TX 1310 nm, RX 1550 nm, 0 to 60°C operating temperature
SFP-1G10ALC-TWDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 10 km transmission; TX 1310 nm, RX 1550 nm, -40 to 85°C operating temperature
SFP-1G10BLCWDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 10 km transmission; TX 1550 nm, RX 1310 nm, 0 to 60°C operating temperature
SFP-1G10BLC-TWDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 10 km transmission; TX 1550 nm, RX 1310 nm, -40 to 85°C operating temperature
SFP-1G20ALCWDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 20 km transmission; TX 1310 nm, RX 1550 nm, 0 to 60°C operating temperature
SFP-1G20ALC-TWDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 20 km transmission; TX 1310 nm, RX 1550 nm, -40 to 85°C operating temperature
SFP-1G20BLCWDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 20 km transmission; TX 1550 nm, RX 1310 nm, 0 to 60°C operating temperature
SFP-1G20BLC-TWDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 20 km transmission; TX 1550 nm, RX 1310 nm, -40 to 85°C operating temperature
SFP-1G40ALC-TWDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 40 km transmission; TX 1310 nm, RX 1550 nm, -40 to 85°C operating temperature
SFP-1G40BLCWDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 40 km transmission; TX 1550 nm, RX 1310 nm, 0 to 60°C operating temperature
SFP-1G40BLC-TWDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 40 km transmission; TX 1550 nm, RX 1310 nm, -40 to 85°C operating temperature
SFP-1GEZXLCSFP module with 1 1000BaseEZX port with LC connector for 110 km transmission, 0 to 60°C operating temperature
SFP-1GEZXLC-120SFP module with 1 1000BaseEZX port with LC connector for 120 km transmission, 0 to 60°C operating temperature
SFP-1GLHLCSFP module with 1 1000BaseLH port with LC connector for 30 km transmission, 0 to 60°C operating temperature
SFP-1GLHLC-TSFP module with 1 1000BaseLH port with LC connector for 30 km transmission, -40 to 85°C operating temperature
SFP-1GLHXLCSFP module with 1 1000BaseLHX port with LC connector for 40 km transmission, 0 to 60°C operating temperature
SFP-1GLSXLCSFP module with 1 1000BaseLSX port with LC connector for 2 km transmission, 0 to 60°C operating temperature
SFP-1GLSXLC-TSFP module with 1 1000BaseLSX port with LC connector for 2 km transmission, -40 to 85°C operating temperature
SFP-1GLXLCSFP module with 1 1000BaseLX port with LC connector for 10 km transmission, 0 to 60°C operating temperature
SFP-1GLXLC-TSFP module with 1 1000BaseLX port with LC connector for 10 km transmission, -40 to 85°C operating temperature
SFP-1GSXLCSFP module with 1 1000BaseSX port with LC connector for 0.5 km transmission, 0 to 60°C operating temperature
SFP-1GSXLC-TSFP module with 1 1000BaseSX port with LC connector for 0.5 km transmission, -20 to 75°C operating temperature
SFP-1GZXLCSFP module with 1 1000BaseZX port with LC connector for 80 km transmission, 0 to 60°C operating temperature
SFP-1GZXLC-TSFP module with 1 1000BaseZX port with LC connector for 80 km transmission, -40 to 85°C operating temperature

Whitepaper: The right industrial firewall can strengthen the safety and reliability of control systems

In this paper, we present important considerations for implementing network security and network security risk management. We also include information on how to develop mitigation strategies for specific problems and provide directions on how to choose the right industrial firewall to ensure safety and reliability for industrial networks

FAQ: Is Your Network Infrastructure Ready for the IIoT?

The Industrial Internet of Things (IIoT) trend aims to improve efficiency and productivity by connecting different devices together as well as collecting and analyzing large volumes of data to offer accurate information. However, before reaping the benefits of the IIoT, users need to ensure that the correct infrastructure is in place. To make sure your network is ready for the IIoT, check out five of the most frequently mentioned questions

PacketGuard for Modbus TCP Packet Inspection

Animation: How Does PacketGuard Stop Unsafe Modbus Packets


 

backtotop
edr-810-series-safenergy-i-din-moxa-ti-vit-nam