Features and Benefits

  • CAN 2.0A and CAN 2.0B supported
  • Two independent CAN communication ports
  • CAN transfer rate up to 1 Mbps
  • 2 kV electrical isolation
  • LED for transmit/receive status on each port
  • Optional 120 ohm terminal resistor for CAN bus network
  • DLL library and examples included
  • Windows driver provided

Overview

Moxa’s new CP-602E-I CAN (Controller Area Network) interface board supports the PCI Express interface. As a stand-alone CAN controller, the CP-602E-I is a cost-effective solution that provides two active CAN controllers with a DB9 connector on the same board. The CP-602E-I CAN interface board uses the NXP SJA1000 and transceiver PCA82C251, which provide the bus arbitration and error detection. The -40 to 85°C wide operating temperature (CP-602E-I-T only) and 2 kV isolation make the boards suitable for use in harsh industrial environments.

• Hardware
ConnectorsDB9 male x 2
CAN ControllerNXP SJA1000
CAN TransceiverPCA82C251
CAN SpecificationCAN 2.0 A/B
Signal SupportCAN_H, CAN_L, GND
Transfer Rate1 Mbps
Max. Number of Boards per PC4
Electrical Isolation2 kV
Termination Resistor120 ohm (selected by jumper)
• Driver Support
WindowsWindows 2000, Windows XP/2003/Vista/2008 (x86/x64)
• Software
LibrariesVisual C/C++, Borland C/C++
• Environmental Limits
Operating TemperatureStandard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Storage Temperature-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity5 to 95% (non-condensing)
• Standards and Certifications
EMCEN 55032/24
EMICISPR 32, FCC Part 15B Class B
EMSIEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 1 kV
IEC 61000-4-5 Surge: Power: 2 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m
IEC 61000-4-8 PFMF
IEC 61000-4-11
• MTBF (mean time between failures)
Time4,645,502 hrs
StandardTelcordia (Bellcore) SR-332
• Power Requirements
Input Current780 mA @ 5 VDC
• Warranty
Warranty Period5 years
DetailsSee www.moxa.com/warranty

Available Models

Model No.Description
CP-602E-I2-port CAN interface PCI Express board, with 2 KV optical isolation protection, 0 to 55°C operating temperature
CP-602E-I-T2-port CAN interface PCI Express board with 2 KV optical isolation protection, -40 to 85°C operating temperature

Dimensions

 

Pin Assignment

backtotop
2-port-can-interface-pci-express-boards-cp-602-e-i-moxa-vit-nam