ioLogik E2214

Smart Ethernet Remote I/O with 6 DIs, 6 relays

Category: Smart Ethernet I/O

Introduction to RTU Controller

ioLogik E2200 Series Datasheet

Click&Go V2 Users Manual

ioLogik E2200 Series User’s Manual

Tech Note: Connecting the ioLogik 2000 to a SolarWinds NPM

ioAdmin Configuration Utility for ioLogik I/O Server Series

ioEventLog is a utility which receive the alarm message from ioLogik E2000,ioMirror E3000 series and ioLogik E4200

MX-AOPC UA Logger

MX-AOPC UA Server

Features and Benefits

Front-end intelligence with patented Click&Go control logic, up to 24 rules
Active communication with MX-AOPC UA Server
Save time and wiring cost with peer-to-peer communication
Supports SNMPv1/v2c/v3
Friendly configuration via web browser
Simplify I/O management with MXIO library for Windows or Linux platforms
Wide operating temperature range of -40 to 75°C (-40 to 167°F)

Introduction

Moxa’s ioLogik E2200 is a new type of Ethernet micro RTU controller, which is a PC-based data acquisition and control device that uses proactive, event-based reporting to control I/O devices. Unlike traditional RTUs, which are passive and must poll for data, Moxa’s ioLogik E2200 series with Active OPC Server makes seamless connection with SCADA systems a reality. In addition, SNMP is used for communicating with an NMS (Network Management System) for IT field users. The I/O status of an Ethernet micro RTU controller can be reported and controlled automatically on-site based on user specified conditions. This report-by-exception approach, which is new to PC-based monitoring, requires far less bandwidth than traditional polling methods.

Actice Alarming with Local Intelligence

The ioLogik E2200 Micro RTU supports simple and powerful Click&Go™ technology to deliver event-driven reports and allow alarm messages to be sent by email, TCP/UDP, and SMNP Trap with real-time stamps. With built-in Click&Go™ intelligence, the ioLogik E2200 micro RTU can be used for simple output control when it is triggered by input status, without the need for a PC controller. The ioLogik E2200 micro RTU reports I/O status automatically based on user-specified conditions. This report by-exception approach requires far less bandwidth than the traditional polling approach.

• ioLogik E2214 Specifications
• Inputs and Outputs
Digital Inputs	6 channels
Relay Outputs	6 channels
Isolation	3k VDC or 2k Vrms
• Digital Input
Sensor Type	Wet Contact (NPN or PNP) and Dry Contact
I/O Mode	DI or Event Counter
Dry Contact	• On: short to GND • Off: open
Wet Contact (DI to GND)	• On: 0 to 3 VDC • Off: 10 to 30 VDC
Common Type	3 points per COM
Counter Frequency	900 Hz
Digital Filtering Time Interval	Software Configurable
• Relay Output
Type	Form A (N.O.) power relay
Contact Current Rating	• Inductive Load: 2 A @ 30 VDC, 250 VAC, 110 VAC • Resistive Load: 5 A @ 30 VDC, 250 VAC, 110 VAC
Minimum permitted load	1 A @ 5 VDC
Initial Insulation Resistance	1000 mega-ohms (min.) @ 500 VDC
Mechanical Endurance	1,000,000 operations
Electrical Endurance	100,000 operations @ 5 A resistive load
Contact Resistance	100 milli-ohms (max.)
Pulse Output	0.3 Hz at rated load
Note	Ambient humidity must be non-condensing and remain between 5 and 95%. The relays of the ioLogik E2214 may malfunction when operating in high condensation environments below 0° Celsius.
• Power Requirements
Input Voltage	12 to 36 VDC
Input Current	170 mA @ 24 VDC
• MTBF (mean time between failures)
Time	307,239 hrs
Standard	Telcordia SR332
• Common Specifications
• LAN
Ethernet	1 10/100 Mbps RJ45 port
Protection	1.5 kV magnetic isolation
Protocols	Modbus/TCP (slave), TCP/IP, UDP, DHCP, BOOTP, SNMP, HTTP, CGI, SNTP, SMTP
• Serial
Interface	1 RS-485-2w terminal block port
Parity	None
Data Bits	8
Stop Bits	1
Flow Control	None
Baudrate	1200 to 115200 bps
Protocols	Modbus RTU (gateway)
• Physical Characteristics
Wiring	I/O cable max. 14 AWG
Dimensions	115 x 79 x 45.6 mm (4.53 x 3.11 x 1.80 in)
Weight	under 250 g (0.55 lb)
Mounting	DIN-rail or wall
• Environmental Limits
Operating Temperature	Standard Models: -10 to 60°C (14 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)
Shock	IEC 60068-2-27
Vibration	IEC 60068-2-6
Altitude	Up to 2000 m
Note	Please contact Moxa if you require products guaranteed to function properly at higher altitudes.
• Standards and Certifications
Safety	UL 508
EMC	EN 61000-6-2/6-4
EMI	CISPR 22, FCC Part 15B Class A
EMS	IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m 1.4 GHz to 2 GHz: 3 V/m 2 GHz to 2.7 GHz: 1 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV IEC 61000-4-5 Surge: Power: 1 kV IEC 61000-4-6 CS: 10 V IEC 61000-
Green Product	RoHS, CRoHS, WEEE
Note	Please check Moxa’s website for the most up-to-date certification status.
• Warranty
Warranty Period	2 years
Details	See www.moxa.com/warranty

*Because of the limited lifetime of power relays, products that use that component are covered by a 2-year warranty.

Available Models

	Model No.	Description
	ioLogik E2214	Ethernet Micro RTU Controller with 6 digital inputs and 6 relay outputs, -10 to 60°C operating temperature
	ioLogik E2214-T	Ethernet Micro RTU Controller with 6 digital inputs and 6 relay outputs, -40 to 75°C operating temperature

Compatible Modules

LDP1602 LCD Module

	Model No.	Description
	LDP1602	LCD module with 16 x 2 text display and 5 buttons

Optional Accessories

Trial Software

	Model No.	Description
	MXview	Industrial network management software designed for converged automation networks

Towards a Smarter World with Moxa’s I/O Solutions

Smart I/O Success Stories
The innovation of Moxa’s data acquisition engineers is reflected in Moxa’s latest I/O products, which are helping companies around the world simplify the management of distributed control systems, and as a result reduce costs and create business growth. In addition, Moxa also provides innovative data acquisition software that helps businesses simplify the process of integrating I/O devices with an existing network. This smart automation software not only helps users gather data faster and more efficiently, but also helps businesses identify, assess, and monitor potential risks.

Download this 16-page Smart I/O Brochure to learn more about:
– The Smarter World Trend
– Moxa’s Innovative Designs
– Moxa’s Easy-to-Use Automation Software
– Success Stories Based on Moxa’s Smart I/O Solutions
– Moxa’s Smart IO Product Selection Guide

Related White Papers

A New Chapter in the Legacy of RS-485 Data Acquisition Devices
This white paper provides insight into the future of RS-485 data acquisition devices, and how Moxa is adding a new chapter to the legacy of RS-485 data acquisition devices.

SNMP I/O Devices Make Monitoring Environmental Conditions Easy
This paper will first explain what SNMP is, why you should use SNMP for environmental monitoring, and then discuss how an SNMP environmental monitoring device will help ease the management and implementation process.

Hardware Informations:

Dimensions

Pin Assignment

I/O (left to right)