| • Camera |
| Sensor | 1/2.7” HD progressive scan CMOS |
| Lens | 3X (controlled manually), f=3 mm (wide) to 9 mm (tele), F1.2 to F2.3
• Horizontal angle of view: 108.1° to 37.5°
• Vertical angle of view: 57.1° to 21.6°
• Diagonal: 125.7° to 42.4° |
| Camera Angle (controlled manually) | • Pan: ±175°, Tilt: 0 to 85°
• Rotation: Pan: ±180° |
| Minimum Illumination | • Color: 0.2 lux at F1.2
• B/W: 0.05 lux at F1.2 |
| Day & Night | Auto/Color/BW; ICR control |
| Synchronization | Internal |
| White Balance | ATW/AWB |
| Electronic Shutter | Fixed (1/30 to 1/25000 sec) |
| S/N Ratio | 50 dB (AGC OFF, DNR ON) |
| ICR Control | Auto (light sensor control) or DI control |
| DNR | Built-in DNR (digital noise reduction) |
| WDR | Levels 1-8
• color: 100 dB
• B/W: 110 dB |
| AGC (auto gain control) | 2X, 4X, 8X, 16X, 32X, 64X |
| IRIS | Auto, DC drive |
| Auto Exposure | Level ±5 |
| Image Rotation | Flip, Mirror, and 180° rotation |
| Image Setting | Manual tuning with saturation, sharpness, and contrast |
| Black Level Control | High, Medium, Low |
| • Video |
| Video Compression | H.264 (ISO/IEC 14496-10) or MJPEG |
| Video Output | via Ethernet |
| Video Streams | 3, H.264, or MJPEG independent video streams |
| Video Resolution and FPS (frames per second) |  |
| Video Viewing | • DynaStream™ support for changing the video frame rate automatically
• 3 privacy mask areas provided
• Adjustable image size and quality
• Timestamp and text overlay
• Maximum of 5 simultaneous unicast connections, 50 multicast clients
• RO |
| • Audio |
| Audio Inputs | 1 line-in with 2-pin terminal block connector |
| Audio Outputs | 1 line-out with 2-pin terminal block connector |
| Audio Format | Mono, PCM (G.711) |
| • Network |
| Protocols | TCP, UDP, HTTP, SMTP, FTP, NTP, DNS, DHCP, UPnP, RTP, RTSP, ICMP, IGMPv3, QoS, SNMPv1/v2c/v3, DDNS, Modbus/TCP, 802.1X, SSH/HTTPS |
| Ethernet | 1 10/100BaseT(X) Ethernet port, RJ45 connector |
| • Local Storage |
| SD Socket | Standard SD slot (SDHC) |
| • GPIO |
| Digital Inputs | 1, max. 8 mA
• High: +13 V to +30 V
• Low: -30 V to +3 V |
| Relay Outputs | 1, max. 24 VDC @ 1 A |
| • LED Indicators |
| STAT | Indicates if the system is booted properly or not |
| Network | 10 Mbps or 100 Mbps |
| Power | Power on/off |
| DIP Switch | To turn the LED light on/off |
| • Power Requirements |
| Input Voltage | • VPort 26A-1MP: 12 to 24 VDC or 24 VAC
• VPort P26A-1MP: PoE, IEEE 802.3af |
| Input Current | • VPort 26A-1MP: 12 to 24 VDC, 500 mA or 24 VAC, 5.5 W
• VPort P26A-1MP: 48 VDC, 180 mA |
| Power Consumption | • VPort 26A-1MP: 5.5 W
• VPort P26A-1MP: 5.8 W |
| • Physical Characteristics |
| Housing | Metal, IP66 rated for rain and dust protection |
| Vandal Resistance | EN 62262, IK10 |
| Dimensions | Diameter: 149 mm (5.86 in)
Height: 120 mm (4.72 in) |
| Weight | 1.39 kg (3.06 lb) |
| Installation | Surface mounting (standard), outdoor mounting with optional accessories |
| • Alarms |
| Intelligent Video | Tamper alarm |
| Video Motion Detection | Includes sensitivity settings |
| Scheduling | Daily repeat timing schedule |
| Imaging | JPEG snapshots for pre/trigger/post alarm images |
| Custom Alarms | HTTP event servers and CGI events for setting customized alarm actions |
| Email/FTP Messaging | Automatic transfer of stored images via email or FTP as event-triggered actions |
| Pre-alarm Buffer | 24 MB video buffer for JPEG snapshot images |
| • Security |
| Password | User level password protection |
| Filtering | By IP address |
| Authentication | 802.1X |
| Encryption | HTTPS, SSH |
| • Environmental Limits |
| Operating Temperature | Standard models: -40 to 50°C (-40 to 122°F )
Wide temp. models: -40 to 75°C (-40 to 167°F ) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| Vibration | IEC 60068-2-6, 2 to 13.2 Hz: 2 mm (peak-peak); 13.2 to 100 Hz: 0.7g;
1.50 hrs/axis
IEC 60068-2-6, 3 to 9 Hz: 7 mm (peak-peak); 9 to 150 Hz: 1.0g;
1.86 hrs/axis |
| Shock | IEC 60068-2-27, 20g/11ms |
| Altitude | Up to 2000 m
Note: Please contact Moxa if you require products guaranteed to function
properly at higher altitudes. |
| • Standards and Certifications |
| Safety | UL 60950-1 |
| Rail Traffic | EN50121-4: 2006 (VPort 26A-1MP series) |
| EMI | CISPR 22, FCC Part 15B Class A |
| EMS | IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power 2 kV; Signal: 2 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 |
| • MTBF (mean time between failures) |
| Time | 201,721 hrs |
| Standard | Telcordia SR332 |
| • Warranty |
| Warranty Period | 5 years |
| Details | See www.moxa.com/warranty |
| • Minimum Viewing System Requirements |
| CPU | Pentium 4, 2.4 GHz |
| Memory | 512 MB of memory |
| OS | Windows XP/2000 with SP4 or above, Windows Vista, Windows 7 |
| Browser | Internet Explorer 9.x or above |
| Multimedia | DirectX 9.0c or above
Note: These preliminary specifications are subject to change without notice.
Please check our website or with a sales representative for the most up-to-date specifications. |
| • Software Development |
| VPort SDK PLUS | Includes CGI commands, ActiveX Control, and API library for customized applications or system integration for third third-party developers (the latest version of the SDK is available for download from Moxa’s website). |
| Standard | ONVIF Profile S |
.jpg)
.png)
.jpg)
