NPort 5610-8-DTL/NPort 5650-8-DTL Series
8-port RS-232/422/485 serial device servers
- Description Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
- Thông số Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
- Ordering Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
- Tài liệu Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
Features and Benefits
- 8 serial ports supporting RS-232/422/485
- Compact desktop design
- 10/100M auto-sensing Ethernet
- Configure via Telnet/Web/Windows utility
- Socket modes: TCP server/TCP client/UDP/Real COM
- SNMP MIB-II for network management
Overview
NPort® 5600-8-DTL device servers can conveniently and transparently connect 8 serial devices to an Ethernet network, allowing you to network your existing serial devices with basic configurations. You can both centralize management of your serial devices and distribute management hosts over the network.The NPort® 5600-8-DTL device servers have a smaller form factor than our 19-inch models, making them a great choice for applications needing additional serial ports when mounting rails are not available.
Convenient Design for RS-485 Applications
The NPort® 5650-8-DTL device servers support selectable 1 kΩ and 150 kΩ pull high/low resistors and a 120 Ω terminator. In some critical environments, termination resistors may be needed to prevent the reflection of serial signals. When using termination resistors, it is also important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible with all environments, NPort® 5600-8-DTL device servers use DIP switches to allow users to adjust termination and pull high/low resistor values manually for each serial port.
LED Indicators to Ease Your Maintenance Tasks
The System LED, Serial Tx/Rx LEDs, and Ethernet LEDs (located on the RJ45 connector) provide a great tool for basic maintenance tasks and help engineers analyze problems in the field. The NPort® 5600’s LEDs not only indicate current system and network status, but also help field engineers monitor the status of attached serial devices.
| • Ethernet Interface | |
| Number of Ports | 1 |
| Speed | 10/100 Mbps, auto MDI/MDIX |
| Connector | 8-pin RJ45 |
| Magnetic Isolation Protection | 1.5 kV built-in |
| • Serial Interface | |
| Number of Ports | 8 |
| Serial Standards | NPort 5610-8-DTL: RS-232 NPort 5650-8-DTL/5650I-8-DTL: RS-232/422/485 |
| Connector | DB9 male |
| Serial Line Protection | 15 kV ESD protection for all signals 2 kV isolation protection (NPort 5650I-8-DTL only) |
| RS-485 Data Direction Control | ADDC® (Automatic Data Direction Control) |
| Pull High/Low Resistor for RS-485 | 1 kΩ, 150 kΩ |
| Terminator for RS-485 | 120 Ω |
| • Serial Communication Parameters | |
| Data Bits | 5, 6, 7, 8 |
| Stop Bits | 1, 1.5, 2 |
| Parity | None, Even, Odd, Space, Mark |
| Flow Control | DSR/DTR and RTS/CTS (RS-232 only), XON/XOFF |
| Baudrate | 50 bps to 921.6 kbps |
| • Serial Signals | |
| RS-232 | TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND |
| RS-422 | Tx+, Tx-, Rx+, Rx-, GND |
| RS-485-4w | Tx+, Tx-, Rx+, Rx-, GND |
| RS-485-2w | Data+, Data-, GND |
| • Software | |
| Network Protocols | ICMP, IPv4, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, SNTP, Rtelnet, ARP, RFC2217 |
| Configuration Options | Web Console, Telnet Console, Serial Console, Windows Utility |
| Windows Real COM Drivers | Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded |
| Fixed TTY Drivers | SCO Unix, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X |
| Linux Real TTY Drivers | Linux 2.4.x, 2.6.x, 3.x |
| • Physical Characteristics | |
| Housing | Metal |
| Weight | NPort 5610-8-DTL: 1,760 g (3.88 lb) NPort 5650-8-DTL: 1,770 g (3.90 lb) NPort 5650I-8-DTL: 1,850 g (4.08 lb) |
| • Environmental Limits | |
| Operating Temperature | Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
| Storage Temperature | -40 to 75°C (-40 to 167°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| • Power Requirements | |
| Input Voltage | 12 to 48 VDC |
| Input Current | NPort 5610-8-DTL: 340 mA @ 12 VDC NPort 5650-8-DTL: 470 mA @ 12 VDC NPort 5650I-8-DTL: 740 mA @ 12 VDC |
| • Standards and Certifications | |
| Safety | UL 60950-1 |
| EMC | EN 55032/24 |
| EMI | CISPR 32, FCC Part 15B Class A |
| EMS | IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz, 3 V/m; Signal: 3 V/m IEC 61000-4-8 PFMF IEC 61000-4-11 DIPs |
| • Reliability | |
| Alert Tools | Built-in buzzer and RTC (real-time clock) |
| Automatic Reboot Trigger | Built-in WDT (watchdog timer) |
| • MTBF (mean time between failures) | |
| Time | NPort 5610-8-DTL: 953,388 hrsNPort 5650-8-DTL: 740,457 hrs NPort 5650I-8-DTL: 258,150 hrs |
| Standard | Telcordia (Bellcore) Standard TR/SR |
| • Warranty | |
| Warranty Period | 5 years |
| Details | See www.moxa.com/warranty |
To request a quote, indicate which items you are interested in below and click “Get a Quote”.
Available Models
| Model No. | Description | |
|---|---|---|
| NPort 5610-8-DTL | 8-port RS-232 desktop device server with DB9 male connectors, 0 to 60°C operating temperature | |
| NPort 5650-8-DTL | 8-port RS-232/422/485 desktop device server with DB9 male connectors, 0 to 60°C operating temperature | |
| NPort 5650I-8-DTL | 8-port RS-232/422/485 desktop device server with DB9 male connectors and 2 KV isolation, 0 to 60°C operating temperature | |
| NPort 5610-8-DTL-T | 8-port RS-232 desktop device server with DB9 male connectors, -40 to 75°C operating temperature | |
| NPort 5650-8-DTL-T | 8-port RS-232/422/485 desktop device server with DB9 male connectors, -40 to 75°C operating temperature | |
| NPort 5650I-8-DTL-T | 8-port RS-232/422/485 desktop device server with DB9 male connectors and 2 KV isolation, -40 to 75°C operating temperature |
Optional Accessories
| Model No. | Description | |
|---|---|---|
| PWR-12150-USJP-SA-T | 12V1.5A, -40 to 75°C operating temperature, Screw type AC power jack, US/JP plug | |
| PWR-12150-EU-SA-T | 12V1.5A, -40 to 75°C operating temperature, Screw type AC power jack, EU plug | |
| PWR-12150-UK-SA-T | 12V1.5A, -40 to 75°C operating temperature, Screw type AC power jack, UK plug | |
| PWR-12150-CN-SA-T | 12V1.5A, -40 to 75°C operating temperature, Screw type AC power jack, CN Plug | |
| PWR-12150-AU-SA-T | 12V1.5A, -40 to 75°C operating temperature, Screw type AC power jack, AU plug | |
| PWR-12200-DT-S1 | Desktop power supply (Requires Power Cord) 12VDC 2A, 100-240VAC, 0 to 40°C |
| Model No. | Description | |
|---|---|---|
| DK35A | DIN-Rail Mounting Kit (35 mm) |
| Model No. | Description | |
|---|---|---|
| Mini DB9F-to-TB | DB9 Female to Terminal Block connector |
| Model No. | Description | |
|---|---|---|
| MXview | Industrial network management software designed for converged automation networks |
Appearance
Dimensions
Pin Assignment
.jpg)
.jpg)
