MGate W5108/W5208 Series
1 and 2-port IEEE 802.11a/b/g/n wireless Modbus/DNP3 gateways
- Description Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
- Thông số Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
- Ordering Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
- Tài liệu Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
Features and Benefits
- Retrieve Modbus/DNP3 serial data through an 802.11 network
- Supports serial tunneling communications
- Slave mode supports 16 TCP masters and up to 31 or 62 serial slaves at the same time
- Embedded Modbus/DNP3 traffic monitor
- Secure data access with WEP/WPA/WPA2
- 2 kV serial port isolation
- microSD card for configuration backup
- -40 to 75°C wide operating temperature models available
- Supports 2 digital inputs and 2 digital outputs
Overview
The MGate W5108/W5208 series gateways are an ideal choice for connecting Modbus serial devices to a wireless LAN, or DNP3 serial to DNP3 IP through a wireless LAN. With IEEE 802.11a/b/g/n support, you can use fewer cables in difficult wiring environments, and for secure data transmission, the MGate W5108/W5208 series gateways support WEP/WPA/WPA2. The gateways’ rugged design makes them suitable for industrial applications, including oil & gas, power, process automation, and factory automation.
Modbus Traffic Monitor
The MGate W5108/W5208 series gateways support Modbus Protocol Traffic Monitor for easy troubleshooting, especially during the installation stage. Communication issues could be caused by incorrect software parameters, such as slave ID and register address, or incorrect hardware parameters such as baudrate and interface. With Modbus Protocol Traffic Monitor support, you can check the captured data and easily identify the root cause.
Variety Maintenance Functions
The MGate W5108/W5208 series gateways support a web console and Telnet console for remote maintenance. Each gateway also supports encryption commutation functions such as HTTPS and SSH to prevent security issues. In addition, log functions are provided in the firmware to record connection events and Modbus for maintenance events. Users can review log data remotely through the web console.
| • Ethernet Interface | |
| Protocols | Modbus TCP, DNP3, TCP Client/Server modes supported |
| Number of Ports | 1 |
| Speed | 10/100 Mbps, Auto MDI/MDIX |
| Connector | 8-pin RJ45 |
| Magnetic Isolation Protection | 1.5 kV (built-in) |
| • Serial Interface | |
| Protocols | Modbus RTU/ASCII Master/Slave, DNP3 |
| Number of Ports | MGate W5108: 1 MGate W5208: 2 |
| Serial Standards | RS-232/422/485, software selectable |
| Connectors | DB9 male |
| Pull High/Low Resistor for RS-485 | 1 kΩ, 150 kΩ |
| Terminator for RS-485 | 120 Ω |
| Isolation | 2 kV (built-in) |
| • Serial Communication Parameters | |
| Data Bits | 7, 8 |
| Stop Bits | 1, 2 |
| Parity | None, Even, Odd, Space, Mark |
| Flow Control | RTS/CTS, XON/XOFF, RTS Toggle |
| Baudrate | 50 bps to 921.6 kbps |
| • Serial Signals | |
| RS-232 | TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND |
| RS-422 | Tx+, Tx-, Rx+, Rx-, GND |
| RS-485-4w | Tx+, Tx-, Rx+, Rx-, GND |
| RS-485-2w | Data+, Data-, GND |
| • Wireless Network | |
| Standards Compliance | 802.11a/b/g/n |
| Network Modes | Infrastructure, Ad-Hoc |
| Transmission Rate | 802.11a/g: 65, 54, 48, 36, 24, 18, 12, 9, 6 Mbps, auto rate 802.11b: 11, 5.5, 2, 1 Mbps, auto rate 802.11n 2.4 GHz: HT20, MCS 0-7 802.11n 5 GHz: HT20 & HT40 MCS 0-7 |
| Transmission Distance | Up to 100 meters (in open areas) |
| Antenna Connector | Reverse SMA |
| TX Transmit Power (per antenna port) | 2.4 GHz • 802.11b: 1 to 11 Mbps, Typ. 16 (±1.5 dBm) • 802.11g: 6 to 36 Mbps, Typ.16 (±1.5 dBm) 48 Mbps, Typ. 15 (±1.5 dBm) 54 Mbps, Typ. 14 (±1.5 dBm) • 802.11n (20 MHz): MCS0-3: Typ. 16 dBm (± 1.5 dBm) |
| RX Sensitivity | 2.4 GHz • 802.11b: -92 dBm @ 1 Mbps, -88 dBm @ 2 Mbps, -87 dBm @ 5.5 Mbps, -84 dBm @ 11 Mbps • 802.11g: -91 dBm @ 6 Mbps, -90 dBm @ 9 Mbps, -88 dBm @ 12 Mbps, -86 dBm @ 18 Mbps, -80 dBm @ 24 Mbps, -80 dBm @ 36 |
| Spread Spectrum and Modulation (Typical) | OFDM (54, 48, 36, 24, 18, 12, 9, 6 Mbps) OFDM (MCS0, MCS1, MCS2, MCS3 MCS4, MCS5, MCS6, MCS7) CCK (11 Mbps, 5.5 Mbps) DQPSK (2 Mbps) DBPSK (1 Mbps) |
| Operating Channels (Central frequency) | • US: 2.412 to 2.462 GHz (11 channels) 5.180 to 5.240 (4 channels) 5.260 to 5.320 (4 channels) 5.500 to 5.700 GHz (8 channels, excludes 5.600 to 5.640 GHz) 5.745 to 5.825 GHz (5 channels) • EU: 2.41 |
| • Digital Input/Output | |
| Number of DIOs | 2 DIs and 2 DOs |
| Connectors | 6-pin terminal blocks |
| Dry Contact Level | Logic “0”: Short to GND Logic “1”: Open |
| Wet Contact Level | Logic “0”: +3 VDC max. Logic “1”: +10 to 30 V (COM to DI) |
| Digital Output (Sink Type) | Driver Current: Max. 200 mA per channel On-state voltage: 24 VDC nominal, open collector to 30 V |
| Storage Card Slot | 1 microSD (SDHC) card slot supports up to 32 GB |
| • Software | |
| Configuration Options | Web console, Telnet console |
| Utility | Device Search Utility (DSU) for Windows 95, 98, ME, NT, 2000, Windows XP, Server 2003, Vista, Server 2008 (x86/x64), Windows Server 2008 R2, Windows 7/8/8.1 (x86/x64), Windows Server 2012 (x64), Windows 2012 R2 |
| Network Protocols | TCP/IP, UDP, HTTP, SMTP, NTP, DNS, DHCP Client, SNMP (v1, v2, v3), Private MIB, ARP, Telnet |
| • Security | |
| Authentication | WEP encryption ( 64 or 128 bit), WPA / WPA2-Personal and Enterprise (IEEE 802.1X/RADIUS, TKIP and AES) |
| Encryption | 128-bit TKIP/AES-CCMP EAP-TLS, PEAP/GTC, PEAP/MD5, PEAP/MSCHAPV2, EAP-TTLS/PAP, EAP-TTLS/CHAP, EAP-TTLS/MSCHAP, EAP-TTLS/MSCHAPV2, EAP-TTLS/EAP-MSCHAPV2, EAP-TTLS/EAP-GTC, EAP-TTLS/EAP-MD5, LEAP |
| • Physical Characteristics | |
| Housing | Metal, IP30 |
| Weight | MGate W5108: 589 g (1.30 lb) MGate W5208: 738 g (1.63 lb) |
| Dimensions | MGate W5108: 45.8 x 105 x 134 mm (1.8 x 4.13 x 5.28 in) MGate W5208: 59.6 x 101.7 x 134 mm (2.35 x 4 x 5.28 in) |
| • Environmental Limits | |
| Operating Temperature | Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| Vibration | IEC 60068-2-6, IEC 60068-2-64 |
| Shock | IEC 60068-2-27 |
| Drop | IEC 60068-2-32 |
| • Power Requirements | |
| Input Voltage | 9 to 60 VDC |
| Input Current | 495 mA @ 9 VDC; 202 mA @ 24 VDC; 114 mA @ 48 VDC; 99 mA @ 60 VDC |
| Power Connector | Terminal block |
| • Standards and Certifications | |
| Safety | UL 508, EN 60950-1 |
| Hazardous Location | UL/cUL, Class 1 Division 2, ATEX Zone 2, IECEx |
| EMC | EN 55032/24 |
| EMI | CISPR 32, FCC Part 15B Class B |
| EMS | IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV IEC 61000-4-5 Surge: Power: 2 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m IEC 61000-4-8 PFMF |
| Radio | EN 300328, EN 301893, TELECOM CE (ETSI EN 301 893, ETSI EN 300 328), ARIB RCR STD-33, ARIB STD-66 |
| • Reliability | |
| Alarm Functions | SMS, relay, e-mail |
| Alert Tools | Built-in buzzer |
| Automatic Reboot Trigger | Built-in WDT (watchdog timer) |
| • MTBF (mean time between failures) | |
| Time | MGate W5108: 668,518 hrs MGate W5208: 556,271 hrs |
| Standard | Telcordia SR332 |
Available Models
| Model No. | Description | |
|---|---|---|
| MGate W5108 | 1-port Modbus/DNP3 gateway with 802.11 a/b/g/n WLAN (supports US/EU/Japan/China bands respectively), 0 to 60°C operating temperature | |
| MGate W5108-T | 1-port Modbus/DNP3 gateway with 802.11 a/b/g/n WLAN (supports US/EU/Japan/China bands respectively), -40 to 75°C operating temperature | |
| MGate W5208 | 2-port Modbus gateway/DNP3 with 802.11 a/b/g/n WLAN (supports US/EU/Japan/China bands respectively), 0 to 60°C operating temperature | |
| MGate W5208-T | 2-port Modbus gateway/DNP3 with 802.11 a/b/g/n WLAN (supports US/EU/Japan/China bands respectively), -40 to 75°C operating temperature |
Optional Accessories
Connectors
| Model No. | Description | |
|---|---|---|
| Mini DB9F-to-TB | DB9 Female to Terminal Block connector |
Wireless AP Mounting Kit
| Model No. | Description | |
|---|---|---|
| WK-51-01 | Wall-mounting kit, 51mm wide |
DIN Rail Power Supplies
| Model No. | Description | |
|---|---|---|
| DR-4524 | 45W/2A DIN-rail 24 VDC power supply with universal 85 to 264 VAC or 120-370 VDC input, -10 to 50°C operating temperature | |
| DR-75-24 | 75W/3.2A DIN-rail 24 VDC power supply with universal 85 to 264 VAC or 120-370 VDC input, -10 to 60°C operating temperature | |
| DR-120-24 | 120W/5A DIN-rail 24 VDC power supply with universal 88 to 132 VAC or 176 to 264 VAC input by switch, or 248-370 VDC , -10 to 60°C operating temperature |
Wireless LAN Antennas
| Model No. | Description | |
|---|---|---|
| ANT-WSB-ANF-09 | 2.4 GHz,omni-directional antenna, 9 dBi, N-type (female) | |
| ANT-WSB-PNF-12 | 2.4GHz, Directional/Panel antenna, 12dBi, N-type (female) connector | |
| ANT-WSB-PNF-18 | 2.4 GHz, panel antenna, 18 dBi, N-type (female) | |
| ANT-WDB-ANM-0502 | 2.4/5 GHz, dual-band omni-directional antenna, 5/2 dBi, N-type (male) | |
| ANT-WDB-ANF-0609 | 2.4/5 GHz, dual-band omni-directional antenna, 6/9 dBi, N-type (female) | |
| ANT-WDB-PNF-1518 | 2.4/5 GHz, dual-band panel antenna, 15/18 dBi, N-type (female) | |
| ANT-WDB-ANF-0407 | Dual-band omni-directional antenna: 4 dB at 2.4 GHz and 7 dB at 5 GHz | |
| ANT-WSB-AHRM-05-1.5m | 2.4 GHz, omni-directional/dipole antenna, 5 dBi | |
| ANT-WSB5-ANF-12 | 5 GHz, omni-directional antenna, 12 dBi, N-type (female) | |
| ANT-WSB5-PNF-18 | Directional panel antenna: 18 dBi at 5 GHz | |
| ANT-WDB-ANM-0407 | 2.4/5 GHz, dual-band omni-directional antenna, 4/7 dBi, N-type (male) |
Optimizing PLC Network Performance and Management
To increase productivity and reduce operating costs, many manufacturers and plant operators have deployed industrial Ethernet to converge remotely isolated fieldbus systems for centralized control and monitoring. In addition to systems interoperability, integration of fieldbus segments and industrial Ethernet networks will require the optimization of PLC network performance and manageability. This paper will discuss how three facets of PLC network optimization can ensure high network availability, simplify network monitoring and configuration, and maximize network flexibility.
How to Architect Your Systems to Get the Most Out of Your Modbus Devices
The migration of all industrial applications to Ethernet is unquestioned. But, before network engineers can inch closer toward all-systems-go, they need to overcome several challenges. The most pressing one is to ensure that there is no breakdown in communication between serial devices and SCADA hosts. It is no secret that plenty of solutions are available on the market. The immediate question is which solution fits your network’s requirements the best.
In this white paper, we will look at four challenges that arise when linking up Modbus-supported devices to SCADA systems. We will also provide solutions for different scenarios to address your concerns.
