IA261-I/IA262-I
RISC-based fanless computers with 2 or 4 optically isolated serial ports, dual LANs, VGA, CAN, DIO, CompactFlash, USB
IA261-I 262-I Series Datasheet
Moxa Device Manager(MDM) Datasheet
IA260 IA261 IA262 EM-2260-LX User Manual
IA261/262 Hardware User’s Manual
IA261/262 Quick Installation Guide
Moxa Device Manager User Guide 2.3
Programmer Guide for Moxa’s Windows CE Embedded Computers
Programmer’s Guide for Moxa’s Windows CE Embedded Computers
WinCE Remote Tools for MOXA’s Embedded Computers
Windows CE Remote Tools for Moxa’s Embedded Computers
Moxa Device Manager Agent and Gateway with mass configuration function in CE(IA26X and W406)
Moxa Device Manager Agent and Gateway with mass configuration function in Linux(IA26x)
Moxa Device Manager Agent and Gateway with mass configuration function in XPE(X86)
- Description Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
- Thông số Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
- Ordering Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
- Tài liệu Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
Features and Benefits 
- Cirrus Logic EP9315 ARM9 CPU, 200 MHz
- 128 MB RAM on-board, 32 MB flash disk
- VGA interface for field site monitoring
- 2 KV digitally isolated RS-232/422/485 serial ports
- Dual 10/100 Mbps Ethernet for network redundancy
- Dual 2 KV digitally isolated CAN ports with CANopen protocol support
- 8+8 DI/DO with 3 KV optical isolation protection
- 12 to 48 VDC redundant power input design
- Supports CompactFlash and USB 2.0 hosts
- Ready-to-run Linux or WinCE 6.0 platform
- -40 to 75°C wide temperature models available
Overview
The IA261-I/262-I embedded computers come with 2 (IA262-I) or 4 (IA261) RS-232/422/485 serial ports, dual CANbus ports (IA262-I only), dual Ethernet ports, 8 digital input channels, 8 digital output channels, VGA output, 2 USB hosts, and a CompactFlash socket. The computers are housed in a compact, IP40 protected, industrialstrength aluminum case.
The IA261-I/262-I computers use the Cirrus Logic EP9315 ARM9, 32-bit, 200 MHz RISC CPU. This powerful computing engine supports several useful communication functions, but will not generate too much heat. The built-in 32 MB NOR Flash ROM and 128 MB SDRAM provide enough memory to run your application software directly on the IA261-I/262-I.
With its built-in VGA output interface, the IA261-I/262-I are suitable for use with SCADA systems in industrial applications, such as manufacturing automation, production line process monitoring, and mining automation, that require VGA and HMI features.
The IA261-I/262-I computers support RS-232/422/485, CANbus, digital I/O, come with 2 KV isolation protection, and have dual LAN ports, making them ideal as communication platforms for industrial applications that require network redundancy. In addition to the standard models, wide temperature (-40 to 75°C) models are available for use in harsh industrial automation environments.
The IA260 embedded computers come pre-installed with either the open standard Linux OS, or the more common WinCE OS. Software written for a desktop PC can be easily ported to the IA260 platform by using a common compiler, without needing to modify the code, and the software you develop for your own applications can be stored in the IA260’s flash memory
| Hardware Specifications | |
| • Computer | |
| CPU | Cirrus EP9315 ARM9 CPU, 200 MHz |
| OS (pre-installed) | Windows CE 6.0 or Linux |
| DRAM | 128 MB onboard |
| Flash | 32 MB onboard |
| USB | USB hosts x 2, compliant with USB 2.0 (OHCI) type A connectors |
| • Storage | |
| Storage Expansion | CompactFlash slot |
| • Display | |
| Graphics Controller | EP9315 internal graphics accelerator engine with TTL graphical signal support |
| Display Memory | Dynamic video memory (shares system memory) |
| Display Interface | CRT interface for VGA output, DB15 female connector |
| Resolution | 1024 x 768, 8 bits |
| • Ethernet Interface | |
| LAN | 2 auto-sensing 10/100 Mbps ports (RJ45) |
| Magnetic Isolation Protection | 1.5 kV built-in |
| • Serial Interface | |
| Serial Standards | 2 or 4 RS-232/422/485 ports, software-selectable (DB9 male) |
| ESD Protection | 4 kV for all signals |
| Isolation | 2 kV digital isolation |
| Console Port | RS-232 (TxD, RxD, GND), 4-pin header output (115200, n, 8, 1) |
| • Serial Communication Parameters | |
| Data Bits | 5, 6, 7, 8 |
| Stop Bits | 1, 1.5, 2 |
| Parity | None, Even, Odd, Space, Mark |
| Flow Control | RTS/CTS, XON/XOFF, ADDC® (automatic data direction control) for RS-485 |
| Baudrate | 50 bps to 921.6 kbps (supports non-standard baudrates; see user’s manual for details) |
| • Serial Signals | |
| RS-232 | TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND |
| RS-422 | TxD+, TxD-, RxD+, RxD-, GND |
| RS-485-4w | TxD+, TxD-, RxD+, RxD-, GND |
| RS-485-2w | Data+, Data-, GND |
| • Digital Input | |
| Input Channels | 8, source type |
| Input Voltage | 0 to 30 VDC |
| Digital Input Levels for Dry Contacts | • Logic level 0: Close to GND • Logic level 1: Open |
| Digital Input Levels for Wet Contacts | • Logic level 0: +3 V max. • Logic level 1: +10 V to +30 V (COM to DI) |
| Connector Type | 10-pin screw terminal block (8 points, COM, GND) |
| Isolation | 3 kV optical isolation |
| • Digital Output | |
| Output Channels | 8, sink type |
| Output Current | Max. 200 mA per channel |
| On-state Voltage | 24 VDC nominal, open collector to 30 V |
| Connector Type | 9-pin screw terminal block (8 points, GND) |
| Isolation | 3 kV optical isolation |
| • CANbus Communication (IA262 models only) | |
| Interface | Dual optically isolated CAN2.0A/2.0B compliant ports |
| CAN Controller | Phillips SJA1000T |
| Signals | CAN-H, CAN-L |
| Isolation | 2 kV digital isolation |
| Speed | 10 kbps to 1 Mbps |
| Connector Type | DB9 male |
| • LEDs | |
| System | Power, Ready, Storage |
| LAN | 10M/Link x 2, 100M/Link x 2 (on connector) |
| Serial | TxD x 4, RxD x 4 IA261-I: P1 to P4 for serial ports IA262-I: P1 to P2 for serial ports, P3 to P4 for CAN ports |
| • Switches and Buttons | |
| Reset Button | Supports “Reset to Factory Default” |
| • Physical Characteristics | |
| Housing | Aluminum, industrial vertical form factor |
| Weight | 950 g |
| Dimensions | 60 x 115 x 152 mm (2.36 x 4.53 x 5.98 in) |
| Mounting | DIN rail, wall |
| • Environmental Limits | |
| Operating Temperature | Standard Models: -10 to 60°C (14 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
| Storage Temperature | Standard Models: -20 to 80°C (-4 to 176°F) Wide Temp. Models: -40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| Anti-vibration | 5 g rms @ IEC-68-2-34, random wave, 5-500 Hz, 1 hr per axis |
| Anti-shock | 50 g @ IEC-68-2-27, half sine wave, 11 ms |
| • Power Requirements | |
| Input Voltage | Redundant power input design PWR1: 12 to 48 VDC (3-pin terminal block) PWR2: 12 to 48 VDC (power jack with thread) |
| Power Consumption | With no load on USB ports: 5.8 W • 240 mA @ 24 VDC • 480 mA @ 12 VDC With full load on USB ports: 11 W • 450 mA @ 24 VDC • 900 mA @ 12 VDC |
| • Standards and Certifications | |
| Safety | UL 60950-1, CSA C22.2 No. 60950-1-03, EN 60950-1 |
| EMC | EN 61000-6-4, EN 61000-3-2 Class D, EN 61000-3-3, EN 61000-6-2, FCC Part 15 Subpart B Class A |
| Green Product | RoHS, CRoHS, WEEE |
| • Reliability | |
| Alert Tools | Built-in buzzer and RTC (real-time clock) |
| Automatic Reboot Trigger | Built-in WDT (watchdog timer) |
| MTBF (mean time between failures) | IA261-I: 118,752 hrs IA261-I: 131,832 hrs |
| • Warranty | |
| Warranty Period | 5 years |
| Details | See www.moxa.com/warranty |
| Note | These hardware specifications describe the embedded computer unit itself, but not its official accessories. In particular, the wide temperature specification does not apply to accessories such as power adapters and cables. |
| • Software Specifications | |
| • Linux | |
| OS | Linux 2.6.23 |
| File System | JFFS2, NFS, Ext2, Ext3 |
| Internet Protocol Suite | TCP, UDP, IPv4, SNMPv1, ICMP, ARP, HTTP, CHAP, PAP, DHCP, NTP, NFS, SMTP, Telnet, FTP, TFTP, PPP, PPPoE |
| Internet Security | OpenVPN, iptables firewall |
| Web Server (Apache) | Allows you to create and manage web sites |
| Terminal Server (SSH) | Provides secure encrypted communications between two un-trusted hosts over an insecure network |
| Dial-up Networking | PPP Daemon for Linux that allows Unix machines to connect to the Internet through dialup lines, using the PPP protocol, as a PPP server or client. Works with ‘chat’, ‘dip’, and ‘diald’, among (many) others. Supports IP, TCP, UDP, and (for Linux) IPX (Novell). |
| Watchdog | Features a hardware function to trigger system reset in a user specified time interval (Moxa API provided) |
| Application Development Software | • Moxa API Library (Watchdog timer, Moxa serial I/O control, Moxa DI/DO API) • GNU C/C++ cross-compiler • GNU C library • GDB source-level debugging server |
| Software Protection | Encryption tool for user executable files (based on patented Moxa technology) |
| • Windows Embedded CE 6.0 | |
| OS | Windows Embedded CE 6.0 |
| File System | FAT (for on-board flash) |
| Internet Protocol Suite | TCP, UDP, IPv4, SNMPv2, ICMP, IGMP, ARP, HTTP, CHAP, PAP, SSL, DHCP, SNTP, SMTP, Telnet, FTP, PPP |
| Web Server (WinCE IIS) | Supports ASP, ISAPI Secure Socket Layer (SSL 2/3) and Transport Layer Security (TLS/SSL 3.1) public key-based protocols, and Web Administration ISAPI Extensions |
| Dial-up Networking | Supports RAS client API and PPP, Extensible Authentication Protocol (EAP), and RAS scripting |
| File Server | Enables remote clients to access files and other resources over the network |
| Watchdog | Features a hardware function to trigger system reset in a user specified time interval. (Moxa API provided) |
| Application Development Software | • Moxa WinCE 6.0 SDK • Moxa API Library • C Libraries and Run-times • Component Services (COM and DCOM) • Microsoft® .NET Compact Framework 2.0 • XML, including DOM, XQL, XPATH, XSLT, SAX, SAX2 • SOAP Toolkit Client • Winsock 2.2 |
To request a quote, indicate which items you are interested in below and click “Get a Quote”.
Available Models
| Model No. | Description | |
|---|---|---|
| IA261-I-CE | RISC-based embedded computer with 4 serial ports, DIO, dual LANs, VGA, Compact-Flash, USB, Win CE 6.0 OS(Operating Temperature: -10 to 60°C) | |
| IA261-I-LX | RISC-based embedded computer with 4 serial ports, DIO, dual LANs, VGA, CompactFlash, USB, Linux OS, -10 to 60°C operating temperature | |
| IA261-I-T-CE | RISC-based embedded computer with 4 serial ports, DIO, dual LANs, VGA, Compact-Flash, USB, Win CE 6.0 OS(Operating Temperature: -40 to 75°C) | |
| IA261-I-T-LX | RISC-based embedded computer with 4 serial ports, DIO, dual LANs, VGA, CompactFlash, USB, Linux OS, -40 to 75°C operating temperature | |
| IA262-I-CE | RISC-based embedded computer with 2 serial ports, DIO, dual LANs, VGA, CANbus, CompactFlash, USB, Win CE 6.0 OS(Operating Temperature: -10 to 60°C) | |
| IA262-I-LX | RISC-based embedded computer with 2 serial ports, DIO, dual LANs, VGA, CANbus, CompactFlash, USB, Linux OS, -10 to 60°C operating temperature | |
| IA262-I-T-CE | RISC-based embedded computer with 2 serial ports, DIO, dual LANs, VGA, CANbus, CompactFlash, USB, Win CE 6.0 OS(Operating Temperature: -40 to 75°C) | |
| IA262-I-T-LX | RISC-based embedded computer with 2 serial ports, DIO, dual LANs, VGA, CANbus, CompactFlash, USB, Linux OS, -40 to 75°C operating temperature |
Optional Accessories
| Model No. | Description | |
|---|---|---|
| Mass Configuration Tool | A time-saving tool that helps users simultaneously deploy many tasks to Moxa’s embedded computers (available free) |
White Paper
.jpg){kind=small}
Building the Industrial Cloud:The Immediate Future of M2M Technology
In 2013, substantial steps towards building the Internet of Things at last began to materialize. In this white paper, Moxa examines the sorts of technology industrial networks will be relying on as they begin to build and deploy machine-to-machine networks. Software automations, hardware optimizations, and integrated platforms that fully exploit the convergence of these two main branches of system design are examined closely, to give IA and IT engineers a better idea of what challenges and obstacles they should be preparing for at the dawn of this new technological epoch……..more
