EDS-G205-1GTXSFP Series

5G-port full Gigabit unmanaged Ethernet switches

switch-cong-nghiep-unmanaged-5-cong-giga-EDS

Features and Benefits 

  • Fiber optic options for extending distance and electrical noise immunity
  • Redundant dual 12/24/48 VDC power inputs
  • Supports jumbo frame transmission up to 10 KB
  • Relay output warning for power failure and port break alarm
  • Broadcast storm protection
  • -40 to 75°C operating temperature range (T models)

Introduction

The EDS-G205-1GTXSFP switches are equipped with 5 Gigabit Ethernet ports, respectively, and up to 2 fiber optic ports (one for EDS-G205-1GTXSFP series and two for EDS-G308-2 SFP series), making them ideal for applications that demand high bandwidth. The EDS-G205-1GTXSFP/ switches provide an economical solution for your industrial Gigabit Ethernet connections, and the built-in relay warning function alerts network managers when power failures or port breaks occur. In addition, the add-on 4-pin DIP switches can be used for controlling over the functions of broadcast protection, jumbo frame, IEEE 802.3az energy saving and 100/1000 SFP speed switching is ideal for easy on-site configuration for any industrial automation application. Two models are available in this series. One model has an operating temperature range of -10 to 60°C, and the other model has an extended operating temperature range of -40 to 75°C. Both models undergo a 100% burn-in test to ensure that they fulfill the special needs of industrial automation control applications. The EDS-G205- 1GTXSFP switches can be installed easily on a DIN-rail or in distribution boxes.

• Technology
StandardsIEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3z for 1000BaseX
IEEE 802.3x for Flow Control
IEEE 802.3az for Energy-Efficient Ethernet
Processing TypeStore and Forward
• Switch Properties
MAC Table Size8 K
Packet Buffer Size1024 kbit
Jumbo Frame Size10 KB
• Interface
RJ45 Ports10/100/1000BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection
Fiber Ports100/1000BaseSFP slot (SFP model)
DIP SwitchesOne for port break alarm, one for Enable/Disable broadcast storm protection, jumbo frame, IEEE 802.3az energy saving and 100/1000 SFP speed switching
Alarm Contact1 relay output with current carrying capacity of 1 A @ 24 VDC
• Power Requirements
Input Voltage12/24/48 VDC, redundant dual inputs
Operating Voltage9.6 to 60 VDC
Input Current0.14 A @ 24 V
Connection1 removable 6-contact terminal block
Reverse Polarity ProtectionPresent
• Physical Characteristics
HousingMetal
IP RatingIP30 protection
Dimensions29 x 135 x 105 mm (1.14 x 5.31 x 4.13 in)
Weight290 g (0.64 lb)
InstallationDIN-rail mounting, wall mounting (with optional kit)
• Environmental Limits
Operating TemperatureStandard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity5 to 95% (non-condensing)
• Standards and Certifications
SafetyUL 508, EN 60950-1 (LVD)
Hazardous LocationUL/cUL Class 1 Division 2 Groups A/B/C/D,
ATEX Zone 2 Ex nA nC IIC T4 Gc
EMCEN 55032/24
EMICISPR 32, FCC Part 15B Class A
EMSIEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8
Rail TrafficEN 50121-4
ShockIEC 60068-2-27
FreefallIEC 60068-2-32
VibrationIEC 60068-2-6 
Note: Please check Moxa’s website for the most up-to-date certification status.
• MTBF (mean time between failures)
Time2,823,446 hrs
StandardTelcordia (Bellcore), GB

Available Models

 Model No.Description
EDS-G205-1GTXSFPUnmanaged full Gigabit Ethernet switch with 4 10/100/1000BaseT(X) ports and 1 combo 10/100/1000BaseT(X) or 100/1000BaseSFP port, -10 to 60°C operating temperature
EDS-G205-1GTXSFP-TUnmanaged full Gigabit Ethernet switch with 4 10/100/1000BaseT(X) ports and 1 combo 10/100/1000BaseT(X) or 100/1000BaseSFP port, -40 to 75°C operating temperature

FAQ: Is Your Network Infrastructure Ready for the IIoT?

The Industrial Internet of Things (IIoT) trend aims to improve efficiency and productivity by connecting different devices together as well as collecting and analyzing large volumes of data to offer accurate information. However, before reaping the benefits of the IIoT, users need to ensure that the correct infrastructure is in place. To make sure your network is ready for the IIoT, check out five of the most frequently mentioned questions.

FAQ_cover
2015 Industrial Ethernet Solutions Brochure

Build SMART Connectivity to Boost Your Industrial IoT Opportunities

The Industrial Internet of Things is evolving to achieve all kinds of information automation. Staying ahead of the curve leads to increased productivity, which crucially depends on high efficiency and availability of network connectivity. Moxa’s comprehensive product portfolio goes beyond meeting stringent industrial Ethernet standards, bringing vertical expertise to around-the-clock Industrial IoT operations around the world.

Check out this 24-page IES Brochure to get detailed information of the following products and solutions:
– Automation-Friendly Network Management Suite
– NAT/VPN/Firewall Secure Routers
– Industrial Ethernet Switches
– Industrial Wireless Connectivity
– Industrial Ethernet Gateways
– Field Networking and Automation Solutions

Download IES 2015 Brochure!

backtotop
eds-g205-1gtxsfp-series-safenergy-i-din-moxa-ti-vit-nam