EDS-405A-EIP/EDS-408A-EIP Series

5 and 8-port managed Ethernet switches with EtherNet/IP enabled

Category: DIN-rail managed Ethernet Switches

Description Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
Thông số Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
Ordering Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering
Tài liệu Specs Details Overview Components Packages Resources Additional Modules Complementary products Architecture Tools Benefits Features Customer Ordering

Features and Benefits

EtherNet/IP and IGMP snooping enabled by default
Port mirroring, QoS, IEEE 802.1Q VLAN, and port-based VLAN supported
EtherNet/IP EDS (Electronic Data Sheet) file, custom AOI (Add-On Instructions) file, and FactoryTalk® View faceplate included

Introduction

The EDS-405A/408A-EIP are 5 and 8-port managed Ethernet switches with EtherNet/IP enabled. With Ethernet/IP embedded, the EIP switches are visible with custom faceplate in FactoryTalk® View industrial management software, for greater operational and network visibility in factory automation HMIs. The EDS-405A/408A-EIP also supports a variety of useful management functions, such as IGMP snooping, IEEE 802.1Q VLAN, QoS, port mirroring, SNMP, bandwidth management and warning by email or relay.

• Technology
Standards	IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) IEEE 802.3x for Flow Control IEEE 802.1D-2004 for Spanning Tree Protocol IEEE 802.1w for Rapid STP IEEE 802.1p for Class of Service IEEE 802.1Q for VLAN Tagging
• Software Features
Management	IPv4/IPv6, SNMP v1/v2c/v3, LLDP, Port Mirror, RMON, DHCP Server/Client, DHCP Option 66/67/82, BootP, TFTP, SNTP, SMTP, RARP, Telnet, Syslog, SNMP inform, Flow Control, Backpressure flow control
Filter	802.1Q, Port-Based VLAN, GVRP, IGMP v1/v2, GMRP
Redundancy Protocols	STP, RSTP, Turbo Ring v1/v2, Turbo Chain
Time Management	SNTP, NTP Server/Client
Industrial Protocols	EtherNet/IP, Modbus/TCP
MIB	MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9
• Switch Properties
MAC Table Size	2 K (EDS-405A-EIP), 8 K (EDS-408A-EIP)
Packet Buffer Size	1 Mbit
• Interface
RJ45 Ports	10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection
Console Port	RS-232 (RJ45 connector)
DIP Switches	Turbo Ring, Master, Coupler, Reserve
LED Indicators	PWR1, PWR2, FAULT, MSTR/HEAD, CPLR/TAIL, 10/100M
Alarm Contact	1 relay output with current carrying capacity of 1 A @ 24 VDC
• Power Requirements
Input Voltage	24 VDC, redundant dual inputs
Operating Voltage	12 to 45 VDC
Input Current	EDS-405A-EIP: 0.21 A @ 24 V EDS-408A-EIP: 0.22 A @ 24 V
Overload Current Protection	Present
Connection	1 removable 6-contact terminal block
Reverse Polarity Protection	Present
• Physical Characteristics
Housing	Metal, IP30 protection
Dimensions	53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in)
Packing Size	19.2 x 16.8 x 9.3 cm
Weight	650 g
Packing Weight	EDS-405A-EIP series: 1140 g EDS-408A-EIP series: 1220 g
Installation	DIN-rail mounting, wall mounting (with optional kit)
• Environmental Limits
Operating Temperature	Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)
• Standards and Certifications
Safety	UL 508, UL 60950-1, CSA C22.2 No. 60950-1, EN 60950-1*
Hazardous Location	UL/cUL Class I Division 2 Groups A/B/C/D, ATEX Zone 2 Ex nC IIC
EMC	EN 55032 Class A
EMI	CISPR 32, FCC Part 15B Class A
EMS	IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8
Traffic Control	NEMA TS2
Rail Traffic	EN 50121-4*
Marine	DNV, GL
Shock	IEC 60068-2-27
Freefall	IEC 60068-2-32
Vibration	IEC 60068-2-6
• MTBF (mean time between failures)
Time	EDS-405A-EIP Series: 392,000 hrs EDS-408A-EIP Series: 363,000 hrs
Standard	Telcordia (Bellcore), GB

Available Models

	Model No.	Description
	EDS-408A-EIP	Entry-level managed Ethernet switch with 8 10/100BaseT(X) ports, 0 to 60°C operating temperature, EtherNet/IP enabled
	EDS-408A-EIP-T	Entry-level managed Ethernet switch with 8 10/100BaseT(X) ports, -40 to 75°C operating temperature, EtherNet/IP enabled
	EDS-405A-EIP	Entry-level managed Ethernet switch with 5 10/100BaseT(X) ports, 0 to 60°C operating temperature, EtherNet/IP enabled
	EDS-405A-EIP-T	Entry-level managed Ethernet switch with 5 10/100BaseT(X) ports, -40 to 75°C operating temperature, EtherNet/IP enabled

Optional Accessories

Trial Software

	Model No.	Description
	MXconfig	Industrial network configuration tool
	MXstudio Industrial Network Management Suite	Industrial network management suite for installation, operation, maintenance, and diagnostics

Brochure

Optimize Your Network Infrastructure for More Industrial IoT Opportunities

While the Industrial Internet of Things (IIoT) with its wave of innovation ushers in immense opportunities for businesses, it also opens the door to new threats. The underlying network infrastructure, therefore, must overcome this ever-growing number of challenges to sustain truly reliable connectivity. This brochure will introduce how Moxa helps its customers and partners optimize industrial network infrastructure to achieve operational efficiency, availability and reliability in various industrial environments

White Paper

Optimizing PLC Network Performance and Management

To increase productivity and reduce operating costs, many manufacturers and plant operators have deployed industrial Ethernet to converge remotely isolated fieldbus systems for centralized control and monitoring. In addition to systems interoperability, integration of fieldbus segments and industrial Ethernet networks will require the optimization of PLC network performance and manageability. This paper will discuss how three facets of PLC network optimization can ensure high network availability, simplify network monitoring and configuration, and maximize network flexibility.