RISC ready-to-run embedded computers with 1 or 2 serial ports, dual LANs, SD
Moxa Device Manager(MDM) Datasheet
UC-7101/7110/7112 Series Datasheet
Moxa Device Manager User Guide 2.3
UC-7101/7110/7112-LX Software User’s Manual
UC-7112-LX Plus Software User’s Manual
UC-7112-LX Plus, UC-7112-LX, UC-7110-LX HW User’s Manual
UC-7112-LX Plus/7112/7110 Quick Installation Guide
Linux Tool-Chain for uClinux Series
Tool-Chain for Linux Kernel 2.6.x for IA24X, W3XX-LX Series, UC-7112-LX Plus, IA3341
Nền tảng giao tiếp dựa trên RISC của dòng máy tính UC-7110/UC-7112 giúp chúng trở nên lý tưởng cho các ứng dụng nhúng. Máy tính tích hợp 1 hoặc 2 cổng serial RS-232/422/485 và cổng LAN Ethernet đơn hoặc kép tốc độ 10/100 Mbps để cung cấp cho người dùng nền tảng giao tiếp thuận tiện.
Nền tảng UC-7110/UC-7112 sử dụng CPU RISC ARM9. Kiến trúc và công nghệ bán dẫn hiện đại sử dụng trong CPU RISC ARM9 được thiết kế để cung cấp CPU với công cụ máy tính mạnh mẽ và nhiều chức năng giao tiếp hữu ích mà không tỏa ra quá nhiều nhiệt lượng. Tùy chọn 8 hoặc 16 MB Flash ROM và 16 hoặc 31 MB SDRAM cung cấp thêm nhiều bộ nhớ, ổ cắm SD (chỉ UC-7112) cung cấp mang đến cho người dùng mở rộng bộ nhớ linh hoạt để chạy các ứng dụng tạo ra nhiều dữ liệu. Cổng LAN đơn hoặc kép được tích hợp trong ARM9 làm cho các máy tính UC-7110/UC-7112 là nền tảng giao tiếp lý tưởng cho các ứng dụng thu thập dữ liệu và chuyển đổi giao thức. 1 hoặc 2 cổng serial RS-232/422/485 cho phép bạn kết nối nhiều thiết bị serial.
Hệ điều hành Linux hoặc μClinux được cài đặt sẵn cung cấp một nền tảng mở để phát triển phần mềm. Điều này có nghĩa là phần mềm được viết cho các PC desktop có thể dễ dàng chuyển sang máy tính nhúng UC-7110 hoặc UC-7112 với trình biên dịch chéo GNU, loại bỏ nhu cầu dành nhiều thời gian để sửa đổi code hiện có. Hệ điều hành, trình điều khiển thiết bị, phần mềm của riêng bạn có thể được lưu trữ trong bộ nhớ flash của UC-7110/UC-7112.
Hardware Specifications | |
• Computer | |
CPU | MOXA ART ARM9 32-bit RISC CPU, 192 MHz |
DRAM | UC-7110/7112: 16 MB UC-7112 Plus: 32 MB |
Flash | UC-7110/7112: 8 MB UC-7112 Plus: 16 MB |
OS (pre-installed) | μClinux or Linux |
• Storage | |
Storage Expansion | SD slot (UC-7112, and UC-7112 Plus only) |
• Ethernet Interface | |
LAN | Auto-sensing 10/100 Mbps (RJ45) • 2 ports |
Magnetic Isolation Protection | 1.5 kV built-in |
• Serial Interface | |
Serial Standards | RS-232/422/485 software-selectable (DB9 male) • 2 ports |
ESD Protection | 4 kV ESD for all signals |
Console Port | RS-232 (TxD, RxD, GND) • 3-wire pin-header |
• Serial Communication Parameters | |
Data Bits | 5, 6, 7, 8 |
Stop Bits | 1, 1.5, 2 |
Parity | None, Even, Odd, Space, Mark |
Flow Control | RTS/CTS, XON/XOFF, ADDC® (automatic data direction control) for RS-485 |
Baudrate | 50 bps to 921.6 kbps (supports nonstandard baudrates; see user’s manual for details) |
• Serial Signals | |
RS-232 | TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND |
RS-422 | TxD+, TxD-, RxD+, RxD-, GND |
RS-485-4w | TxD+, TxD-, RxD+, RxD-, GND |
RS-485-2w | Data+, Data-, GND |
• LEDs | |
System | Ready |
LAN | LED located on the RJ45 connector • 10M/Link x 2, 100M/Link x 2 |
Serial | TxD x 2, RxD x 2 |
• Physical Characteristics | |
Housing | Aluminum (1 mm) |
Weight | 190 g (0.42 lb) |
Dimensions | 77 x 111 x 26 mm (3.03 x 4.37 x 1.02 in) |
Mounting | DIN rail, wall |
• Environmental Limits | |
Operating Temperature | Standard Models: -10 to 60°C (14 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
Storage Temperature | Standard Models: -20 to 80°C (-4 to 176°F) Wide Temp. Models: -40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity | 5 to 95% (non-condensing) |
Anti-Vibration | 1 Grms @ IEC-68-2-6, sine wave (resonance search), 5-500 Hz, 1 Oct/min, 1 cycle, 13 min 17 sec per axis (UC-7101/7110 only) |
• Power Requirements | |
Input Voltage | 12 to 48 VDC |
Input Current | • 170 mA @ 24 VDC • 340 mA @ 12 VDC |
Power Consumption | 4.5 W |
• Standards and Certifications | |
Safety | UL 60950-1, CSA C22.2 No. 60950-1-03, EN 60950-1 |
EMC | EN 55032 Class A, EN 61000-3-2 Class A, EN 61000-3-3, EN 55024, FCC Part 15 Subpart B Class A, DNV |
Green Product | RoHS, CRoHS, WEEE |
• Reliability | |
Alert Tools | Built-in buzzer and RTC (real-time clock) |
Automatic Reboot Trigger | Built-in WDT (watchdog timer) |
• MTBF (mean time between failures) | |
Time | UC-7110: 149,414 hrs UC-7112 Plus: 148,980 hrs UC-7112: 148,980 hrs |
Standard | UC-7110: MIL-HDBK-217F UC-7112 Plus: Bellcore-SR332 UC-7112: MIL-HDBK-217F |
• Warranty | |
Warranty Period | 5 years |
Details | See www.moxa.com/warranty Note: These hardware specifications describe the embedded computer unit itself, but not its official accessories. In particular, the wide temperature specification does not apply to accessories such as power adapters and cables. |
Software Specifications | |
• Linux (UC-7112-LX Plus only) | |
OS | Linux 2.6.38 |
File System | JFFS2, NFS, Ext2, Ext3, Ext4, VFAT/FAT |
Internet Protocol Suite | TCP, UDP, IPv4, IPv6, SNMP v1/v2c, ICMP, ARP, HTTP, CHAP, PAP, DHCP, NTP, NFS, SMTP, Telnet, FTP, TFTP, PPP, PPPoE, SSH 1.0/2.0, SSL |
Internet Security | OpenVPN, IPTables Firewall, OpenSSL |
Terminal Server (SSH) | Provides secure encrypted communications between two untrusted hosts over an unsecure network |
Dial-up Networking | PPP Daemon (pppd) for Linux that uses the PPP protocol and allows Unix machines to connect to the Internet as PPP servers or clients, through dialup. The PPP Daemon Works with chat, dip, and diald programs among others, and supports the IP, TCP, UDP, and IPX for Linux (Novell) protocols. |
Watchdog | Features a hardware function to trigger system reset in a user-specified time interval(Moxa API provided) |
Moxa Package Management System (MPKG) | Provides package management system which you can install/uninstall software utilities or libraries. |
IP Bonding | Linux standard bonding driver provides a method for aggregating multiple network interfaces into a single logical “bonded” interface. |
Net-SNMP | Support v1 and v2c. |
Cryptographic Hardware Accelerator | Supports DES-ECB, DES-CBC, DES-EDE3, AES-ECB, and AES-CBC algorithms |
Debian | Debian 5 lenny port provided |
Application Development Software | • Moxa API Library (Moxa serial I/O control, Moxa DI/DO API, Moxa buzzer API) • GNU C/C++ cross-compiler • GNU C library |
• μClinux | |
OS | μClinux 2.6.19 |
File System | JFFS2 |
Internet Protocol Suite | TCP, UDP, IPv4, SNMPv1, ICMP, ARP, HTTP, CHAP, PAP, DHCP, NTP, NFS, SMTP, Telnet, FTP, TFTP, PPP, PPPoE |
Web Server (Boa) | Allows you to create and manage web sites |
Terminal Server (Telnet) | Provides telnet communications between two hosts over the network |
Dial-up Networking | PPP Daemon (pppd) for Linux that uses the PPP protocol and allows Unix machines to connect to the Internet as PPP servers or clients, through dialup. The PPP Daemon Works with chat, dip, and diald programs among others, and supports the IP, TCP, UDP, and IPX for Linux (Novell) protocols. |
Application Development Software | • Moxa API Library (Watchdog timer, Moxa serial I/O control) • arm-elf-gcc: C/C++ cross-compiler • μClibc: POSIX standard C library |
To request a quote, indicate which items you are interested in below and click “Get a Quote”.
Model No. | Description | |
---|---|---|
UC-7110-LX | 2 serial ports, dual LANs, μClinux OS(Operating Temperature: -10 to 60°C) | |
UC-7110-T-LX | 2 serial ports, dual LANs, μClinux OS(Operating Temperature: -40 to 75°C) | |
UC-7112-LX | 2 serial ports, dual LANs, SD, μClinux OS(Operating Temperature: -10 to 60°C) | |
UC-7112-LX Plus | 2 serial ports, dual LANs, SD, Linux 2.6 OS(Operating Temperature: -10 to 60°C) |
Model No. | Description | |
---|---|---|
Mass Configuration Tool | A time-saving tool that helps users simultaneously deploy many tasks to Moxa’s embedded computers (available free) | |
MDM API | Moxa Device Manager Application Program Interface (available free) |
Model No. | Description | |
---|---|---|
DK35A | DIN-Rail Mounting Kit (35 mm) |
White Paper
Building a Future-Proof Data Processing Solution with Intelligent IoT Gateways
To date, most discussions about the Industrial Internet of Things (IoT) have been about connecting new devices and rapidly bringing them online. In this white paper we look at the implications of bringing such a large number of devices online, namely, the need for efficient methods to collect information from these devices, and discuss how to handle the large amount of data collected from these devices.
Industrial IoT solutions are judged on their ability to adapt to various data acquisition needs and how they can transform the data collected from devices into useful business insights that can help decision makers. What makes an Industrial IoT solution truly stand out is the flexible data handling possibilities that it can provide………..more
White Paper
Developing a Data Acquisition Platform for Industrial IoT Applications
The impact the Internet has had on the way humans live their lives has been unprecedented. It has allowed us to communicate and interact with each other in ways previously unimaginable. Recently, it has opened the door for what many are describing as something that will become more important to our everyday lives than the Internet, the Internet of Things (IoT). One of the most exciting possibilities is in industrial applications, more commonly referred to as the Industrial Internet of Things (Industrial IoT), where communication and interaction capabilities can be extended to devices or things used for factory automation, renewable energy applications, smart grids, intelligent transportation systems, and even oil and gas applications……….more
Application Notes
Accelerate your IIoT-Ready Applications with Smart Industrial Computing
Data is at the heart of the Internet of things (IoT). To make critical data-informed decisions, businesses first need to capture and collect data from all sorts of devices over the Internet before converting the data into valuable business information. Moxa has applied its rich experience in the industrial automation field to provide industrial computing solutions that integrate data acquisition and device management for large-scale, Industrial IoT applications. In this brochure, we will examine several typical applications to see how Moxa’s solutions can help businesses conquer the challenges in the Industrial IoT environments………..more
Professional Design Service
Moxa’s customization service for industrial computing products is based on the Professional Design Service (PDS) concept, which aims to provide customers with tailor-made solutions. Industrial applications often have specific requirements, and specialized solutions are often needed. With more than 20 years of experience in the industrial networking and automation field, Moxa can offer professional, customized products and services that are ideal for your own industrial applications.
Customer Benefits
• Comprehensive consideration of platform system design gives optimal solutions, and guarantees that proposals address customer needs
• Our sophisticated customization procedures are built on meticulous production and quality control processes
• A full-time technical support team gives customers quick and reliable solutions
my-tnh-risc-1-2-cng-serial-uc-7110-uc-7112-moxa-vit-nam