RNAS-1200

Network-attached storage with 2 M12 gigabit PoE+ LAN ports and -40 to 70°C temperature tolerance

Categories: ,
L20140923103903

Phase-out and Last Buy Notice

The RNAS-1200 series will be discontinued starting June 2, 2017. The deadline for placing a final purchase order is Sep. 7, 2017. Due to the limited availability of these products, orders will be processed till we run out of stock.
For alternative solution, please  visit our RailComputers.


Features

  • 2 gigabit Ethernet ports for network redundancy
  • 2 100 GB disks pre-installed (RNAS-1211-T model only)
  • Complies with all EN 50155 mandatory test items*
  • IEC 61373 certified for shock and vibration resistance
  • JBOD, BIG, RAID 0, and RAID 1 functions available
  • IHS (Intelligent Heating Solution) technology for reliable operation
  • Data XPro for data protection in harsh environments
  • Fast synchronization in RAID 1

Overview

Moxa’s RNAS-1200 network-attached storage (NAS) units provide high performance, high reliability, and high capacity data storage in harsh industrial environments. All RNAS-1200 devices are housed in a fanless, thermally efficient, dust and water-protected IP54-rated chassis. This sealed enclosure eliminates internal fans as a point of critical system failure, and protects the internal components from dust and water splashes. RNAS-1200 devices are compliant with mandatory sections of EN 50155, covering operating temperature, power input voltage, surge, ESD, and vibration, as well as conformal coating and power insulation, making them suitable for a variety of industrial applications.
RNAS-1200 devices also come with Moxa’s Intelligent Heating Solution™ (IHS) and Data XPro™ technologies. IHS automatically heats the system to ensure reliable operation even in extremely low temperatures, while the Data XPro™ utility provides intelligent data and drive protections against extreme heat and vibration. In addition, the series’ remarkably fast array synchronizations make the full data and hardware redundancies of RAID 1 a feasible alternative for industrial applications, while the two gigabit PoE+ network interfaces provide not only network redundancy, but also a highly efficient, fully redundant power supply over the same set of wires.
The RNAS-1200 Series combines simple configuration and multiple data and hardware redundancies in a compact, durable, fanless chassis ideal for industrial environments where extreme temperatures and vibration are a concern. The RNAS-1200 NAS devices are your best choice for industrial-strength data storage for rolling stock video surveillance or remote site data storage applications.

RNAS-1200 Hard Disk Compatibility List

Note: the RNAS-1200 hard disk compatibility list is available at:

https://www.moxa.com/support/sarch_result.aspx?type=doc&prod_id=888&type_id=26

 Hardware Specifications
• Computer
CPUOnboard Marvell 1.0 GHz 88F6281
DRAM512 MB DDRII
Flash MemoryOnboard 2 GB USB DOM to store OS
• Storage
RNAS-1201-T2.5-inch HDD bay x 2, reserved for storage expansion
RNAS-1211-T100 GB HDD x 2 pre-installed
• Ethernet Interface
LANAuto-sensing 10/100/1000 Mbps ports (M12) x 2
• IHS Control
IHS Function ControlTemperature reading, power output control for heating function
• LEDs
SystemRAID, Ready, HDD1, HDD2
LAN100M/Link x 2, 1000M/Link x 2
• Physical Characteristics
HousingAluminum
WeightRNAS-1201-T: 1.98 kg (4.4 lb)
RNAS-1211-T: 2 kg (4.44 lb)
Dimensions252 x 130 x 57 mm (9.92 x 5.12 x 2.24 in)
MountingWall
IP RatingIP 54
• Environmental Limits
Operating Temperature-40 to 70°C (-40 to 158°F)
Storage Temperature-40 to 85°C (-40 to 176°F)
Ambient Relative Humidity5 to 95% (non-condensing)
Anti-VibrationEN 50155 standard
Anti-ShockEN 50155 standard
Conformal CoatingAvailable on request
• Power Requirements
InputPoE (IEEE 802.3af), or PoE+ (IEEE 802.3at)
Note: If the RNAS-1200 is connected to a PoE switch and T1 mode has been configured, the RNAS-1200 should only be booted up when the ambient temperature is above 0°C.
• Standards and Certifications
SafetyUL 60950-1
EMCEN 55032/24
EMICISPR 32, FCC Part 15B Class A
EMSIEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: (80 MHz to 1 GHz: 20 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8
Green ProductRoHS, CRoHS, WEEE
Rail TrafficEN 50155*, IEC 61373
*This product is suitable for rolling stock railway applications, as defined by the EN 50155 standard. For a more detailed statement, click here www.moxa.com/doc/specs/EN_50155_Compliance.pdf
• MTBF (mean time between failures)
TimeRNAS-1211: 486,185 hrs
RNAS-1201: 503,159 hrs
StandardTelcordia (Bellcore) Standard TR/SR
• Warranty
Warranty Period5 years (storage drive not included)
DetailsSee www.moxa.com/warranty
Note: These hardware specifications describe the NAS unit itself, but not its recommended accessories. In particular, the wide temperature specification does not apply to accessories such as power adapters and cables.
Software Specifications
• Operating System
System PlatformLinux 2.6 pre-installed
• Network
IP SettingsFixed IP, DHCP
RedundancyPort trunking / NIC teaming
• System Management
Firmware UpgradeCan be run via web interface
System BootupCan be observed by LED indicators for system status
HDD Failure StatusCan be observed by LED indicators
• Disk Management
JBODTwo hard disks can work independently
Spanning BigTwo hard disks can be merged as spanning big mode
RAID 0Two hard disks can be merged and work in RAID 0 mode
RAID 1Two hard disks can be merged and work in RAID 1 mode
HDD RecoverySupport automatic or manual data recovery when new had disk has been inserted
• Data Protection
Vibration ProtectionStorage buffer available for strong vibration status
Temperature ProtectionStorage buffer available for low/high temperature environment
Fast Sync.Fast synchronization in RAID 1 mode
• SNMP Management
SystemStandard MIB-II (RFC 1213), plus additional Moxa features that include: NTP, time zone, and time display management; channel bonding and IP configuration; management of SSH, FTP, and DNS; and configuration of SNMP agents and traps.

To request a quote, indicate which items you are interested in below and click “Get a Quote”.

Available Models

Model No.Description
RNAS-1201-TNetwork-attached storage with 2 M12 PoE+ Gigabit LAN ports and -40 to 70°C temperature tolerance (operating)
RNAS-1211-TNetwork-attached storage with 2 M12 PoE+ Gigabit LAN ports, 2 pre-installed 100 GB hard disks, and -40 to 70°C temperature tolerance (operating)

Optional Accessories

 Wireless AP Connector Cable

Model No.Description
M12A-8PMM-IP68Field-installation A-coded screw-in Gigabit Ethernet connector, 8-pin male M12 connector, IP68-rated
CBL-M12MM8PRJ45-BK-100-IP671-meter A-coded M12-to-RJ45 Cat-5E UTP Gigabit Ethernet cable, 8-pin male M12 connector, IP67-rated

 Mounts / Brackets / Drive Kits

Model No.Description
RNAS Wall-mount KitMounting frame, screws, 2 rails, and 2 faceplate brackets
RNAS Rail Package2 extra rails for the RNAS-1200

White Paper:
Illustrating the Technology Behind Industrial-Grade NAS
 Download

Network-attached storage (NAS) appliances have gained a firm foothold in consumer markets, and have long dominated in enterprise-scale networks. Now, NAS is gaining further ground in the industrial world, particularly in transportation solutions, but also in other harsh environments like wind farms, electrical substations, or other remote installations. In this paper, learn about what challenges a NAS device engineered for industrial-grade purposes must overcome, and how technology is developing to overcome trials such as extreme temperatures of both cold and heat, high vibration, sudden shocks, network and power redundancy, resource conservation, and data security.


White Paper:Download
Railway Data Security: Building a Durable NVR Platform

In this white paper, Moxa identifies a few solutions to the key challenges railway operators face when trying to secure their data and devices against the peculiar tests of the railway environment. Taking network video recording devices as the stepping off point, we give a brief analysis of how a train’s vibrations, extreme temperature fluctuations, and power supply can adversely affect device functioning and durability. The paper then goes on to consider how thoughtful engineering can eliminate these factors as a point of concern, while at the same time building strong value for the customer through carefully considered, centralized, and automated controls and failsafes.


White Paper:Download
Engineering One Computing Platform for All Classes
of Train
 

This whitepaper discusses the various applications and subsystems to which an on-board train computer may be applied, outside of signaling and control. Most talk within the train industry focuses the vital signaling and control automation; however, today’s trains and other forms of mass transit have many more demands beyond these critical systems. Each class of train has specific requirements and needs that are defined by its on-board auxiliary automation systems. While these requirements vary according to the train environment being served, a core set of hardware requirements may be met that will allow a single, extensible computer to serve in virtually any on-board auxiliary role required. This white paper examines what these core requirements are, and shows how careful computer engineering can cut deployment and integration times for engineers tasked with building on-board train systems.


Railway CCTV Flyer Download
Moxa’s integrated CCTV solutions unify railway security with convenient, cost-effective, and long-lasting IP cameras, computers, network storage, and network devices.

 


Professional Design Service
 
 

 

Moxa’s customization service for industrial computing products is based on the Professional Design Service (PDS) concept, which aims to provide customers with tailor-made solutions. Industrial applications often have specific requirements, and specialized solutions are often needed. With more than 20 years of experience in the industrial networking and automation field, Moxa can offer professional, customized products and services that are ideal for your own industrial applications.

Customer Benefits
• Comprehensive consideration of platform system design gives optimal solutions, and guarantees that proposals address customer needs
• Our sophisticated customization procedures are built on meticulous production and quality control processes
•  A full-time technical support team gives customers quick and reliable solutions


*This product is suitable for rolling stock railway applications, as defined by the EN 50155 standard. For a more detailed statement, click here: www.moxa.com/doc/specs/EN_50155_Compliance.pdf

backtotop
rnas-1200-safenergy-i-din-moxa-ti-vit-nam