Expansion modules with time-synchronization ports, RS-232/422/485 and RS-232/485 serial ports, 10/100 Mbps LAN and unmanaged switch ports, 100 Mbps fiber LAN ports, and PCI development kit
Moxa’s peripheral expansion modules, which come with serial ports, LAN ports, switch ports, fiber ports, time-synchronization IRIG-B ports, and PCI slots, give end-users the greatest flexibility for setting up industrial applications and are fully compatible with Moxa’s embedded computers that have perpheral expansion slots.
The serial port modules include an 8-port RS-232/422/485 module with either DB9 or terminal block connectors, and an 8-port RS- 422/485 module with terminal block connectors. Some modules are even designed with 2 kV digital isolation, making them fully suitable for the great demands of industrial applications that use serial communication. In addition, a 4-port LAN module, 8-port switch module, and 4-port fiber LAN module are available for setting up industrial communication applications with Ethernet-based devices. A universal PCI development kit is also available for PCI-based devices for expanding industrial applications at a reasonable cost.
The time-synchronization module features 3 digital inputs and 4 digital outputs and provides precision timing information using IRIG-B input signals. The module is designed for embedded computers that support the PCI/104 interface.
All modules are designed to offer the greatest flexibility for setting up applications and performing industrial tasks. In particular, users can swap out modules quickly and easily.
DA-LN04-RJ Hardware Specifications | |
• Ethernet Interface | |
LAN | 4 auto-sensing 10/100 Mbps ports (RJ45) |
Magnetic Isolation Protection | 1.5 kV built-in |
• Physical Characteristics | |
Weight | 198 g (0.44 lb) |
Dimensions | 132 x 150 x 42 mm (5.20 x 5.91 x 1.65 in) |
DA-SW08-RJ Hardware Specifications | |
• Ethernet Interface | |
LAN | 8 auto-sensing 10/100 Mbps unmanaged Ethernet switch ports (RJ45) |
Magnetic Isolation Protection | 1.5 kV built-in |
• Physical Characteristics | |
Weight | 200 g (0.44 lb) |
Dimensions | 132 x 150 x 42 mm (5.20 x 5.91 x 1.65 in) |
DA-UPCI-DK Hardware Specifications | |
• Universal PCI Expansion Adatper | |
PCI Slots | 1 |
Interface Bus | 32-bit Universal PCI (3.3 V and 5 V) |
• Physical Characteristics | |
Weight | 195 g (0.43) |
Dimensions | 132 x 150 x 42 mm (5.20 x 5.91 x 1.65 in) |
MTBF (mean time between failures) | 11,053,266 hrs |
DA-FX04-MM-ST-T Hardware Specifications | |
• Fiber Interface | |
Number of Ports | 4 (100BaseFX) |
Fiber Mode | Multi-mode |
Connector Type | ST |
Optical Wavelength | 0 to 2 km, 1310 nm (62.5/125 μm, 500 MHz*km) |
Min-TX Output | -20 dBm |
Max-TX Output | -14 dBm |
RX Sensitivity | -34 dBm |
• Physical Characteristics | |
Weight | 495 g (1.10 lb) |
Dimensions | 132 x 150 x 42 mm (5.20 x 5.91 x 1.65 in) |
• Environmental Limits | |
Operating Temperature | -40 to 70°C (-40 to 158°F) |
• Standards and Certifications | |
EMC | EMC Level 4, ESD Level 4, criteria A |
• Software Functions | |
IEEE 1588 or IP Teaming Selectable (Default =IP Teaming) | Supports 4 modes |
AFT | Adapter Failover Teaming |
SFT | Switch Fault Tolerance |
ALB | Adapter Failover and Load Balancing |
Link Aggregation | supported |
DA-IRIGB-4DIO-PCI104-EMC4 Hardware Specifications | |
• Hardware | |
Communication Controller | FPGA Cyclone V |
Form Factor | PCI/104 |
• Time Code Input | |
IRIG-B | Based on the IRIG STANDARD 200-04 and IEEE 1344 |
• Precision and Accuracy | |
Accuracy (Time Synchronization) | ±1 µs |
Accuracy (Free Running) | ±500 ms @ 24 hr |
• Input Signals | |
Single Level | • Open: High • Short to GND:> Low • Level Input: 5 to 12 V |
Differential Level | • D+ – D- > 0.2 V, RXD is High • D+ – D- < -0.2 V, RXD is Low • Level Input: 5 V |
• Interface | |
IRIG-B | 2-pin wafer to DB9 |
DI/DO | 10-pin wafter to DB9 |
• Protection | |
ESD Protection | 8 kV contact, 15 kV Air ESD protection |
Surge Protection | 2 kV line-to-line and 4 kV line-to-ground surge protection, 8/20 µs waveform |
Insulation | 500 V |
• Digital Input | |
Input Channels | 3, source type |
Input Voltage | 0 to 30 VDC |
Digital Input Levels for Dry Contacts | • Logic level 0: Close to GND • Logic level 1: Open |
Digital Input Levels for Wet Contacts | • Logic level 0: +3 V max. • Logic level 1: +10 V to +30 V (source to DI) |
Isolation | 3 kV optical isolation |
Connector Type | DB9 male |
• Digital Output | |
Output Channels | 4, sink type |
Output Current | Max. 200 mA per channel |
On-state Voltage | 24 VDC nominal, open collector to 30 V |
Isolation | 3 kV optical isolation |
Connector Type | Male |
• Operating Systems | |
Windows | Windows 7E |
Linux | Debian 7 |
• Physical Characteristics | |
Dimensions | 90 x 96 mm (3.54 x 3.78 in) |
• Environmental Limits | |
Operating Temperature | -10 to 60°C (14 to 140°F) |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity | 5 to 95% (non-condensing) |
Altitude | Up to 2000 m |
• Standards and Certifications | |
EMC | CE, FCC |
EMI | EN 55032, EN 61000-3-2, EN 61000-3-3, FCC Part 15 Subpart B Class A |
EMS | IEC 61000-4-2 ESD: Contact 8 kV; Air 15 kV IEC 61000-4-3 RS: 10 V/m (80 MHz to 1 GHz) IEC 61000-4-4 EFT: Signal 4 kV IEC 61000-4-5 Surge: Signal 4 kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8 |
Green Product | RoHS, CRoHS, WEEE |
DA-SP08-DB, DA-SP08-I-DB, DA-SP08-I-TB Hardware Specifications | |
• Serial Interface | |
Serial Standards | 8 RS-232/422/485 ports, software selectable (DB9 male or terminal block connector) |
ESD Protection | 15 kV for all signals |
Isolation | 2 kV digital isolation (DA-SP08-I-DB and DA-SP08-I-TB only) |
• Serial Communication Parameters | |
Data Bits | 5, 6, 7, 8 |
Stop Bits | 1, 1.5, 2 |
Parity | None, Even, Odd, Space, Mark |
Flow Control | RTS/CTS, XON/XOFF, ADDC® (automatic data direction control) for RS-485 |
Baudrate | 50 bps to 921.6 kbps (supports non-standard baudrates; see user’s manual for details) |
• Serial Signals | |
RS-232 | TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND |
RS-422 | TxD+, TxD-, RxD+, RxD-, GND |
RS-485-4w | TxD+, TxD-, RxD+, RxD-, GND |
RS-485-2w | Data+, Data-, GND |
• Physical Characteristics | |
Weight | 290 g (0.64 lb) |
Dimensions | 130 x 150 x 42 mm (5.12 x 5.91 x 1.65 in) |
MTBF (mean time between failures) | 1,753,143 hrs |
DA-SP08-I-EMC4-DB/TB Hardware Specifications | |
• Serial Interface | |
Serial Standards | 8 RS-232/422/485 ports, software selectable (DB9 male or terminal block connector) |
ESD Protection | 8 kV contact, 15 kV air |
Surge Protection | 2 kV line-to-line and 4 kV line-to-ground surge protection, 8/20 μs waveform |
Insulation | 500 V |
Isolation | 2 kV digital isolation |
Pull low/high | 1k/150k, jumper selectable |
Termination Resistor | 120 ohms, jumper selectable |
• Serial Communication Parameters | |
Data Bits | 5, 6, 7, 8 |
Stop Bits | 1, 1.5, 2 |
Parity | None, Even, Odd, Space, Mark |
Flow Control | RTS/CTS, XON/XOFF, ADDC® (automatic data direction control) for RS-485 |
Baudrate | 50 bps to 921.6 kbps (supports non-standard baudrates; see user’s manual for details) |
• Serial Signals | |
RS-232 | TxD, RxD, RTS, CTS, GND |
RS-422 | TxD+, TxD-, RxD+, RxD-, GND |
RS-485-4w | TxD+, TxD-, RxD+, RxD-, GND |
RS-485-2w | Data+, Data-, GND |
• Physical Characteristics | |
Weight | 500 g (1.11 lb) |
Dimensions | 130 x 150 x 42 mm (5.12 x 5.91 x 1.65 in) |
MTBF (mean time between failures) | 1,753,143 hrs |
DA-SP38-I-TB Hardware Specifications | |
• Serial Interface | |
Serial Standards | 8 RS-422/485 ports, software selectable (DB9 male or terminal block connector) |
ESD Protection | 15 kV for all signals |
Isolation | 2 kV digital isolation |
• Serial Communication Parameters | |
Data Bits | 5, 6, 7, 8 |
Stop Bits | 1, 1.5, 2 |
Parity | None, Even, Odd, Space, Mark |
Flow Control | RTS/CTS, XON/XOFF, ADDC® (automatic data direction control) for RS-485 |
Baudrate | 50 bps to 921.6 kbps (supports non-standard baudrates; see user’s manual for details) |
• Serial Signals | |
RS-422 | TxD+, TxD-, RxD+, RxD-, GND |
RS-485-4w | TxD+, TxD-, RxD+, RxD-, GND |
RS-485-2w | Data+, Data-, GND |
• Physical Characteristics | |
Weight | 245 g (0.54 lb) |
Dimensions | 130 x 150 x 42 mm (5.12 x 5.91 x 1.65 in) |
Model No. | Description | |
---|---|---|
DA-IRIGB-4DIO-PCI104-EMC4 | Time synchronization expansion module, 1 IRIG-B signal input port, 3 digital inputs, 4 digital outputs | |
DA-SP08-I-DB | 8-port RS-232/422/485 serial module with DB9 connector and digital isolation | |
DA-SP08-DB | 8-port RS-232/422/485 serial module with DB9 connector | |
DA-SP08-I-TB | 8-port RS-232/422/485 serial module with terminal block connector and digital isolation | |
DA-SP38-I-TB | 8-port RS-422/485 serial module with terminal block connector and digital isolation | |
DA-SW08-RJ | 8-port 10/100 Mbps unmanaged switch module | |
DA-LN04-RJ | 4-port 10/100 Mbps LAN module | |
DA-UPCI-DK | Universal PCI development kit | |
DA-FX04-MM-ST-T | 4-port (100BaseFX) fiber LAN module with multi-mode, ST connector, supports IP Teaming | |
DA-SP08-I-EMC4-DB | 8-port RS-232/422/485 serial module with DB9 connector, digital isolation, and capable of withstanding EMS Level 4 environments | |
DA-SP08-I-EMC4-TB | 8-port RS-232/422/485 serial module with terminal block connector, digital isolation, and capable of withstanding EMS Level 4 environments |
Making Smart Substations Even Smarter: Enhancing Substation Reliability, Availability, and Maintainability
This paper sketches out a few of the more important concerns that electricity suppliers should account for when planning substation upgrades. The focus is on how best to increase the reliability, availability, and maintainability of power substation automation networks within the context of the IEC 61850 vision, to give electricity suppliers a clear idea of the design procedures, device tolerances, and hardware and software features they should expect from the engineers and manufacturers who design and build their networking and computing devices…….more
Using MMS and SNMP to Integrate IT Management for Substation Automation
The devices that electrical substation automation systems are built from depend on highly precise, time-critical communications. Substation thus often use highly specialized monitoring systems to tackle this problem, but can approach it using different technologies. The most up-to-date, “smart” substations use the Manufacturing Messaging Specification (MMS) for communications among IEC 61850 intelligent electronic devices (IEDs), allowing SCADA to monitor and control IED states as well as process switchgear and transformer data directly. However, IT networking devices have been increasingly applied in IEC 61850 systems, and this equipment communicates using SNMP. Consequently, in the modern substation automation industry it’s clear that, for the time being, SNMP and MMS will continue to exist side-by-side. For designers and integrators of electrical substation equipment, bringing both MMS and SNMP support to IT equipment is an ideal, one-size fits-all alternative that allows for the greatest flexibility and adaptability around……..more
White Paper
Building the Industrial Cloud:The Immediate Future of M2M Technology
In 2013, substantial steps towards building the Internet of Things at last began to materialize. In this white paper, Moxa examines the sorts of technology industrial networks will be relying on as they begin to build and deploy machine-to-machine networks. Software automations, hardware optimizations, and integrated platforms that fully exploit the convergence of these two main branches of system design are examined closely, to give IA and IT engineers a better idea of what challenges and obstacles they should be preparing for at the dawn of this new technological epoch……..more
Professional Design Service
Moxa’s customization service for industrial computing products is based on the Professional Design Service (PDS) concept, which aims to provide customers with tailor-made solutions. Industrial applications often have specific requirements, and specialized solutions are often needed. With more than 20 years of experience in the industrial networking and automation field, Moxa can offer professional, customized products and services that are ideal for your own industrial applications.
Customer Benefits
• Comprehensive consideration of platform system design gives optimal solutions, and guarantees that proposals address customer needs
• Our sophisticated customization procedures are built on meticulous production and quality control processes
• A full-time technical support team gives customers quick and reliable solutions
da-series-expansion-modules-safenergy-i-din-moxa-ti-vit-nam