Đặc điểm và tính năng 

  • 10/100BaseT(X) auto-negotiation and auto-MDI/MDI-X
  • Link Fault Pass-Through (LFP)
  • Cổng đồng hồ cảnh báo bằng đầu ra rơ le nếu nguồn điện bị ngắt
  • Dự phòng nguồn điện đầu vào
  • Dải nhiệt độ hoạt động rộng từ -40 đến 75°C (T model)
  • Thiết kế phù hợp hoạt động ở các địa hình gồ ghề (Class 1 Div. 2/Zone 2, IECEx)

Giới thiệu

Bộ chuyển đổi công nghiệp IMC-101 chuyển đổi quang điện tốc độ 10/100BaseT(X) sang 100BaseFX (cổng kết nối SC/ST ). IMC-101 được thiết kế hoạt động hiệu quả giúp duy trì hoạt động liên lục của các ứng dụng tự động hóa công nghiệp. IMC-101 được trang bị đồng hồ cảnh báo đầu ra rơ le giúp ngăn chặn rủi ro và thất thoát cho hệ thống. Dòng IMC-101 được thiết kế sử dụng trong các môi trường công nghiệp khắc nghiệt như là ở các địa hình gồ ghề (Class 1, Division 2/Zone 2, IECEx, DNV, và chứng nhận GL), FCC, UL, tiêu chuẩn CE. Các model IMC-101 hỗ trợ dải nhiệt độ hoạt động từ 0 đến 60°C và có thể kéo dài dải nhiệt độ hoạt động từ -40 đến 75°C (T model). Tất cả các bộ chuyển đổi IMC-101 đều qua 100% thử nghiệm cháy nổ.

• Technology
StandardsIEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
• Interface
RJ45 Ports10/100BaseT(X)
Fiber Ports100BaseFX (SC/ST connectors)
LED IndicatorsPWR1, PWR2, FAULT, 10/100M (TP port), 100M (Fiber port), FDX/COL (Fiber port)
DIP Switches100BaseFX Full/Half duplex selection, port break alarm mask
Alarm ContactOne relay output with current carrying capacity of 1 A @ 24 VDC
• Optical Fiber
• Physical Characteristics
HousingMetal, IP30 protection
Dimensions53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in)
Weight630 g (1.39 lb)
InstallationDIN-rail mounting, wall mounting (with optional kit)
• Environmental Limits
Operating TemperatureStandard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity5 to 95% (non-condensing)
• Power Requirements
Input Voltage12 to 45 VDC redundant inputs
Input Current320 mA @ 45 VDC max.
ConnectionRemovable terminal block
Overload Current Protection1.1 A
Reverse Polarity ProtectionPresent
• Standards and Certifications
SafetyUL 508
Hazardous LocationUL/cUL Class I Division 2 Groups A/B/C/D, ATEX Zone2 Ex nA nC op is IIC T4 Gc, IECEx Ex nA nC IIC T4 Gc
EMCEN 55032/24
EMICISPR 32, FCC Part 15B Class A
EMSEN 61000-4-2 (ESD): Contact: 6 kV; Air: 8 kV
EN 61000-4-3 (RS): 80 MHz to 1 GHz: 3 V/m
EN 61000-4-4 (EFT): Power: 2 kV; Signal: 2 kV
EN 61000-4-5 (Surge): Power 1 kV; Signal 1 kV
EN 61000-4-6 (CS): 150 kHz to 80 MHz: 3 V/m
EN 61000-4-8 (PFMF)
EN 61000-4-11
Green ProductRoHS, CRoHS, WEEE
ShockIEC 60068-2-27
FreefallIEC 60068-2-32
VibrationIEC 60068-2-6
MarineDNV, GL
• MTBF (mean time between failures)
Time401,000 hrs
StandardMIL-HDBK-217F

Available Models

Model No.Description
IMC-101-M-SCIndustrial 10/100BaseT(X) to 100BaseFX media converter, multi mode, SC fiber connector, 0 to 60°C
IMC-101-M-SC-TIndustrial 10/100BaseT(X) to 100BaseFX media converter, multi mode, SC fiber connector, -40 to 75°C
IMC-101-M-STIndustrial 10/100BaseT(X )to 100BaseFX media converter, multi mode, ST fiber connector, 0 to 60°C
IMC-101-M-ST-TIndustrial 10/100BaseT(X )to 100BaseFX media converter, multi mode, ST fiber connector, -40 to 75°C
IMC-101-S-SCIndustrial 10/100BaseT(X) to 100BaseFX media converter, single mode, SC fiber connector, 40km, 0 to 60°C
IMC-101-S-SC-80-TIndustrial 10/100BaseT(X) to 100BaseFX media converter, single mode, SC fiber connector, 80km, -40 to 75°C
IMC-101-S-SC-TIndustrial 10/100BaseT(X) to 100BaseFX media converter, single mode, SC fiber connector, -40 to 75°C
IMC-101-S-SC-80Industrial 10/100BaseT(X) to 100BaseFX media converter, single mode, SC fiber connector, 80km, 0 to 60°C
IMC-101-M-SC-IEXIndustrial 10/100BaseT(X) to 100BaseFX media converter, multi mode, SC connector, IECEx, 0 to 60°C operating temperature
IMC-101-M-ST-IEXIndustrial 10/100BaseT(X) to 100BaseFX media converter, multi mode, ST connector, IECEx, 0 to 60°C operating temperature
IMC-101-S-SC-IEXIndustrial 10/100BaseT(X) to 100BaseFX media converter, single mode, SC connector, 40 km, IECEx, 0 to 60°C operating temperature
IMC-101-M-SC-T-IEXIndustrial 10/100BaseT(X) to 100BaseFX media converter, multi mode, SC connector, IECEx, -40 to 75°C operating temperature
IMC-101-M-ST-T-IEXIndustrial 10/100BaseT(X) to 100BaseFX media converter, multi mode, ST connector, IECEx, -40 to 75°C operating temperature
IMC-101-S-SC-T-IEXIndustrial 10/100BaseT(X) to 100BaseFX media converter, single mode, SC connector, 40 km, IECEx,-40 to 75°C operating temperature

Optional Accessories

DIN Rail Power Supplies

Model No.Description
DR-452445W/2A DIN-rail 24 VDC power supply with universal 85 to 264 VAC or 120-370 VDC input, -10 to 50°C operating temperature
DR-75-2475W/3.2A DIN-rail 24 VDC power supply with universal 85 to 264 VAC or 120-370 VDC input, -10 to 60°C operating temperature
DR-120-24120W/5A DIN-rail 24 VDC power supply with universal 88 to 132 VAC or 176 to 264 VAC input by switch, or 248-370 VDC , -10 to 60°C operating temperature

Mounting Kits

Model No.Description
WK-46Wall Mounting Kit
RK-4U4U-high 19″ rack mounting kit

Using Fiber Media Converters with Copper Networks

The 21st century has seen a huge increase in using Ethernet for industrial automation applications such as remote monitoring. However, the advantages and versatility obtained from using Ethernet for industrial automation applications are offset by a number of drawbacks, one of which is signal interference. As a general rule, shop floor and substation environments are not nearly as friendly as what you would find in an air conditioned office, and for this reason, engineers are now using Fiber Ethernet to extend transmission distance and protect data from the effects of EMI (electromagnetic interference), or even Gigabit Ethernet to provide increased bandwidth. In addition, advanced redundancy solutions, such as STP/RSTP and Moxa’s own Turbo Ring protocol, provide the redundancy needed when implementing Ethernet with automation applications.

In this paper we cover the following topics:

  • Using Media Converters as Part of a Network
  • Going Beyond Media Conversion—LFP and FEF
  • Important Reminder: Use Media Converters in Pairs
  • What to Expect from Redundancy

backtotop
b-chuyn-i-quang-in-10-100baset-x-sang-100basefx-imc-101