Features

  • LFP (Link Fault Pass-through) and FEF (Far End Fault)
  • Supports Store-and-Forward mode and Pass Through mode
  • Auto Negotiation
  • Supports IEEE 802.3AH OAM protocol
  • Plug and Play
  • Hot-swap
  • IP-based remote management
  • Supports WDM type modules

Introduction

The CSM-400 modules are slide-in Ethernet-to-fiber managed media converters for the NRack System™. The modules provide media conversion from 10/100BaseT(X) to 100BaseFX (with SC/ST connectors), and can be installed in any NRack System™ chassis. The CSM-400 modules support LFP and FEF for easily tracing network link failures, and support store-and-forward and pass through modes, 802.3AM OAM for remote management and monitoring, as well as WDM-type fiber modules to reduce fiber cable cost.

• Technology
StandardsIEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X), 100BaseFX
• Interface
RJ45 Ports10/100BaseT(X)
Fiber Ports100BaseFX (SC/ST connectors)
LED IndicatorsPWR, Fiber Link, 10/100M (TP port)
• Optical Fiber
• Physical Characteristics
Dimensions86.8 x 124.3 x 21 mm (3.42 x 4.89 x 0.83 in)
WeightProduct only:
CSM-400-1213/1214/1218: 115 g (0.25 lb)
CSM-400-1224/1225: 125 g (0.28 lb)
Packaged:
CSM-400-1213/1214/1218: 170 g (0.37 lb)
CSM-400-1224/1225: 180 g (0.40 lb)
• Environmental Limits
Operating TemperatureStandard Models: -20 to 55°C (-4 to 131°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity5 to 95% (non-condensing)
• Power Requirements
Input Voltage12 VDC
Input Current220 mA @ 12 VDC max.
• Standards and Certifications
SafetyUL 60950-1
EMCEN 55032/24
EMICISPR 32, FCC Part 15B Class A
EMSEN 61000-4-2 (ESD): Contact: 4 kV; Air: 8 kV
EN 61000-4-3 (RS): 80 MHz to 1 GHz: 3 V/m
EN 61000-4-4 (EFT): Power: 1 kV; Signal: 0.5 kV
EN 61000-4-5 (Surge): Power: 1 kV; Signal: 0.5 kV
EN 61000-4-6 (CS): 150 kHz to 80 MHz: 3 V/m
EN 61000-4-8 (PFMF)
EN
FreefallIEC 60068-2-32
• MTBF (mean time between failures)
Time1,454,560 hrs
StandardTelcordia (Bellcore), GB

Available Models

Model No.Description
CSM-400-121310/100BaseT(X) to 100BaseFX slide-in management module converter, multi-mode ST connector, -20 to 55°C
CSM-400-1213-T10/100BaseT(X) to 100BaseFX slide-in management module converter, multi-mode ST connector, -40 to 75°C
CSM-400-121410/100BaseT(X) to 100BaseFX slide-in management module converter, multi-mode SC connector, -20 to 55°C
CSM-400-1214-T10/100BaseT(X) to 100BaseFX slide-in management module converter, multi-mode SC connector, -40 to 75°C
CSM-400-121810/100BaseT(X) to 100BaseFX slide-in management module converter, single-mode SC connector, -20 to 55°C
CSM-400-1218-T10/100BaseT(X) to 100BaseFX slide-in management module converter, single-mode SC connector, -40 to 75°C
CSM-400-122410/100BaseT(X) to 100BaseFX slide-in management module converter, WDM-A single-mode SC connector, -20 to 55°C
CSM-400-1224-T10/100BaseT(X) to 100BaseFX slide-in management module converter, WDM-A single-mode SC connector, -40 to 75°C
CSM-400-122510/100BaseT(X) to 100BaseFX slide-in management module converter, WDM-B single-mode SC connector, -20 to 55°C
CSM-400-1225-T10/100BaseT(X) to 100BaseFX slide-in management module converter, WDM-B single-mode SC connector, -40 to 75°C

Application Note – Innovative Remote Management for Advanced Traffic Management System

In order to reduce or at least contain traffic congestion in urban environments, traffic authorities count on the Advanced Traffic Management System (ATMS) to control traffic flow. Advanced communication technologies ensure that the data that updates the status of traffic on various highways, intersections, bridges, and more, reaches the control room in real time. Learn more about how Moxa’s new media converter can help you centrally manage these large volumes of incoming data and remotely manage devices in the field.

Application Note – Innovative Remote Management for Passenger Information Systems

Passenger information systems (PIS) rely on large volumes of data collected from various points across a network to update passengers with up-to-the minute information. This data needs to be aggregated and managed in real time in the control room. Find out how Moxa’s new industrial media converter can help you centrally manage data and remotely manage devices in the field.

 

backtotop
module-trt-trong-10-100basetx-sang-100basefx-csm-400-moxa